Installation manual

These abbreviated instructions are for the experienced installer who needs a checklist to get a
standard installation up and running in the minimum of time.
Detailed installation features and functions are referred to later in this manual.
Fast TrackFast Track
Action
Mechanical Setup
Read and understand all safety instructions Page 5
Gather required tools and equipment. Page 12
Heed necessary site considerations. Page 13
Check cabling requirements. Page 14
Select appropriate mounting configuration Page 15
Mount the gate bracket in position. Page 22
Route cables & secure motor mounting Page 22
Fasten gearbox in position Page 23
Determine drive arm length Page 23
Fit drive arm Page 24
Set connecting arm Page 24
These abbreviated instructions are for the experienced installer who needs a checklist to get a
standard installation up and running in the minimum of time.
Detailed installation features and functions are referred to later in this manual.
Fast TrackFast Track
Action
Mechanical Setup
Read and understand all safety instructions Page 5
Gather required tools and equipment. Page 12
Heed necessary site considerations. Page 13
Check cabling requirements. Page 14
Select appropriate mounting configuration Page 15
Mount the gate bracket in position. Page 22
Route cables & secure motor mounting Page 22
Fasten gearbox in position Page 23
Determine drive arm length Page 23
Fit drive arm Page 24
Set connecting arm Page 24
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Page 6
Read and understand all safety instructions Page 5
Connect all wiring: Page 27
Set the gate origin: Page 27
Release the manual override and close the gate(s)
Use origin tool and line up marks
Open gate ½ way and unscrew the manual release
mechanism.
Get into programming mode: Page 28
Remove all power.
Fit the SET link.
Reapply power.
Select master or slave set-up: Page 29
Press and hold TEST, release after 1 flash of L1.
Press and hold TEST, release after 1 or 2 flashes
(1=master, 2=slave).
Set the gate limits: Page 29
Press and hold TEST until gate is closed, release.
Press and hold TEST until gate is open, release.
Press and release TEST. (The MASTER gate will close and
open to pedestrian. The SLAVE gate will close slightly).
Set additional features: (If required) Page 30
Exit programming mode:
Remove the SET link.
Perform installation hand over Page 51
Action
Electrical Setup
These abbreviated instructions are for the experienced installer who needs a checklist to get a
standard installation up and running in the minimum of time.
Detailed installation features and functions are referred to later in this manual.
Fast TrackFast Track
Action
Mechanical Setup
Read and understand all safety instructions Page 5
Gather required tools and equipment. Page 12
Heed necessary site considerations. Page 13
Check cabling requirements. Page 14
Select appropriate mounting configuration Page 15
Mount the gate bracket in position. Page 22
Route cables & secure motor mounting Page 22
Fasten gearbox in position Page 23
Determine drive arm length Page 23
Fit drive arm Page 24
Set connecting arm Page 24
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Page 6
Read and understand all safety instructions Page 5
Connect all wiring: Page 27
Set the gate origin: Page 27
Release the manual override and close the gate(s)
Use origin tool and line up marks
Open gate ½ way and unscrew the manual release
mechanism.
Get into programming mode: Page 28
Remove all power.
Fit the SET link.
Reapply power.
Select master or slave set-up: Page 29
Press and hold TEST, release after 1 flash of L1.
Press and hold TEST, release after 1 or 2 flashes
(1=master, 2=slave).
Set the gate limits: Page 29
Press and hold TEST until gate is closed, release.
Press and hold TEST until gate is open, release.
Press and release TEST. (The MASTER gate will close and
open to pedestrian. The SLAVE gate will close slightly).
Set additional features: (If required) Page 30
Exit programming mode:
Remove the SET link.
Perform installation hand over Page 51
Action
Electrical Setup
Fast TrackFast Track
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 1
Page 7