SYSTEM CONTROLLER TB-CN2R1 (2 AXIS STANDARD) TB-CN3R1 (3 AXIS STANDARD) TB-CN3R1W (3 AXIS WEB) Instruction Manual TB-CN2R1 (2 AXIS STANDARD) TB-CN3R1 (3 AXIS STANDARD) TB-CN3R1W (3 AXIS WEB) Rev 2.
CONTENTS WHAT'S IN THE BOX WARNING & CAUTION GENERAL DESCRIPTIONS A. GENERAL DESCRIPTIONS B. FEATURES INSTALLATION PART NAMES & FUNCTIONS A. GENERAL DESCRIPTIONS B. PART NAME & FUNTIONS (REAR SIDE) C. DRAWING OF CONSOLE DESK ACCESSING TO THE CAMERA MENU A. DISPLAY LCD WINDOW B. How to select address C. Easy preset save and calls D. How to use TOUR function E. How to use PATTERN function F. How to use AUTOSCAN function G. How to use ABB key H.
WARNING & CAUTION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATIONGRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
GENERAL DESCRIPTIONS A. GENERAL DESCRIPTIONS TB-CN2R1, TB-CN3R1(3 AXIS STANDARD) AND TB-CN3R1W(3 AXIS WEB ) are pan/tilt controller and it allows operator to use the functions easily. * This controls camera functions such as pan, tilt, zoom, focus and DVR control. * This saves and calls camera preset positions. * Activates pre-programed pattern, auto-scan and group tour function keys. * The LCD shows display current status as well as provides a menu to set operational parameters.
INSTALLATION 1. Jump 2. Junction Box 3. LAN 4. DATA 7. Terminal Block 8. D-SUB Jack (9 pin) 1. 2. 3. 4. 5. 6. 7. 8. 6 lave Setting Jump Junction Box LAN Cable Connection RJ45 Modular Jack (Data Input) Modular Cable - 8pin Junction Box to Key Board RJ45 Modular Jack (Data Output) Terminal Block (To PTZ Communication Wire) D-SUB Connector (To DVR Communication Port) 5. Cable 6.
INSTALLATION Open the box and check if below all items are included in the box. · KEY BOARD 1 · JUNCTION BOX 1 · 8P RJ45 MODULAR CABLE (2mm) 1 CONNECTOR There is one Connector on the Controller, Which Connector is RJ45 For Master Control. A. B. C. D. E. Connect RJ45 on the rear of controller and DATA on the junction box and plug in DC 12V power to DC jack.
PART NAME & FUNCTIONS A. PART NAME & FUNCTIONS 4 5 6 9 10 32 11 19 1 17 18 25 23 24 29 3 31 2 7 8 12 15 13 16 14 1. LCD Display : Displays numeric input, system status, function status, general status, etc 2. Telemetry Joystick : Allows precise control of Pan/Tilt/Zoom & Moving to menu 3. 0~9 : Numeric key. 4. MENU : Used for Camera (PTZ Camera) and DVR Menu adjustment. 5. ESC : closes the current work and goes to starting mode. 6. DVR : Selects address of DVR (Up to 255) 7.
PART NAME & FUNCTIONS B. PART NAME & FUNCTIONS(REAR SIDE) 1 DATA 1 C.
ACCESSING TO THE CAMERA MENU This function is only for the PTZ camera. A. DISPLAY LCD WINDOW A-1. Initial display 1 2 3 1 CAM : 001 2400 bps 2 STAND BY....... 3 4 Show the selected unit (Camera or DVR) Show the selected unit address No. (001 ~ 255) Show the selected baud rate (2400/4800/9600 bps) Show the controller status 4 B. How to select address B-1. How to select address number 1 or 2 of camera. CAM : 001 2400 bps STAND BY.... 1 or CAM CAM : 002 2400 bps STAND BY....
ACCESSING TO THE CAMERA MENU C. Easy preset save and calls (in case of cam 1/2400 bps) C-1. How to save preset 1 or 2 - After pushing no.1 or 2, hold PRST for about 2 seconds) 1 or 2 PRST CAM 001 2400 bps à 001 Preset Save Up to 255 - After pushing no.1 or 2, hold PRST shortly, it makes PRST work. 1 D. or 2 PRST CAM 001 2400 bps à 001 Preset How to use TOUR function D-1.
ACCESSING TO THE CAMERA MENU F. How to use AUTOSCAN function F-1. How to use autoscan DVR 001 2400 bps à Scan SCAN G. How to use ABB Key - ABB key is a short key to move to a certain preset easily when you use many cameras. - How to use ABB function. ex) In case you stored preset 5 of camera 4 in ABB1. 1 CAM 004 2400 bps à 005 Preset ABB Up to 255 H. How to use FUNCTION Key - You can use function key from 1~ 255, it is not active now.
HOW TO USE SETUP MENU When you change the setting value of setup menu, you should enter "5. Save and Exit" How to go to setup menu : After pushing no. key 11, hold SEL key for over 3 seconds). 1 A. 1 SEL How to use setup menu A-1. As you move joystick up and down, you can go to next menu, move left and right, you can change the value of setting. A-2. Starting display in setup menu. 1. Band rate 2400 bps A-3.
SPECIFICATION MODEL Communication Joystic Power Consumption Display Type Key Type Key board Connector Type Junction Box Connector Humidity TB-CN2R1 TB-CN3R1 MASTER : RS485 (2400bps, 4800bps, 9600bps) SLAVE : RS232 (2400bps, 4800bps, 9600bps) LAN : (TB-CN3R1W Only) (2400bps, 4800bps, 9600bps) 2-Axis 3-Axis, Zoom IN/OUT available DC 12V, 110mA 16 x 2 Character LCD, With Blue Backlight PC Key board Button RJ45 8 Pin Modular Cable Master : Terminal Block.
DIMENSIONS 15
Made in Korea April 2006