Manual

Figure 1:
AMMUNITION
Our over & under shotgun is 12 guage and the chamber
length is 70 mm (2 ¾ in). Use only good quality ammuni-
tion in this shotgun (lead shot only).
ASSEMBLY
Prior to assembly, move the top lever to the extreme right
hand position and release (this will cock the shotgun).
Check the gun again to ensure there is no dirt or burrs in
the fitting portions. Coat all metal surface with a good rust
preventative lubricant.
To assemble, ensure that the latch (8) is in the verticle
position (see Fig 2). Grasp the barrel with left hand and
hold receiver with right hand. Move top lever to extreme
right. Ensure that the extractor is fully forward. Slide the
barrel assembly into the receiver. Ensure that the pins on
the extractor fit into the grooves in the receiver. Close
6
1
2
3 4
5
6
7
8
9
10
11
12
12 Gauge Over & Under Shotgun