Manual

EXTRACTING EMPTY SHOTSHELL

Move the top lever to the right. Swing the barrel to the

loading position. The empty shells will be extracted out for

some length by the extractor, and then

you can take it out with your fingers.

DISASSEMBLY

This shotgun is built to very close tolerances. Use

extreme care when disassembling and re-assembling to

ensure that this shotgun is not damaged.

Before disassembling, ensure your shotgun is unloaded

and pointed in a safe direction. Move the barrel latch

downward to its rear most position. Move the top lever to

the extreme right to open the shotgun. Swing the barrel

down for approximately 15. Ensure the extractor is seated

forward fully. Pull the barrel upward with your left hand,

and press the buttstock downward with your right hand.

Exert force simultaneously with both your hands in oppo-

site directions to release the barrel from the receiver as

shown in Fig 2.

12 Gauge Over & Under Shotgun