CETME SEMI-AUTO RIFLE, CAL. .
INTRODUCTION OPERATION The Cetme Rifle is built using genuine Cetme parts and a U.S. manufactured made receiver. The Cetme conforms to B.A.T.F. requirements. It is semi-automatic only. Loading Magazine The use of reloaded, re-manufactured, hand loaded, or other nonstandard ammunition may result in damage to the user or rifle. Inserting and removing magazine The manufacturer and importer can not accept responsibility for malfunctions resulting from the use of nonstandard defective ammunition.
backwards and verify that the chamber is empty and release the cocking lever. Remove the butt stock which is held by two pins. Remove the grip assembly and retract the bolt assembly and remove it from the receiver. Remove the handguard. Clean the bore with a brush followed by patches and a commercial gun cleaner. To strip the bolt assembly remove the bolt head from the bolt assembly by turning it 90 degrees to the right and turn the locking piece until lug can be removed from the bolt head carrier.
unattended. Secure both the firearm and ammunition from access by unauthorized people including children. When shooting, always be certain that the area beyond the target, including the backstop, is clear and safe. Ensure that shots fired present no safety hazards for yourself or others. Always understand the proper operation of your firearm, and never allow the firearm to be used by anyone who does not understand how to use the firearm properly and safely.
Distributed by: Century International Arms, Inc. 236 Bryce Blvd. Fairfax, Vermont 05454 Tel: 1-800-527-1252 WWW.CENTURYARMS.