Owner's Manual

Page 8 © 2014 Century Arms RAS47 Rifle Manual
Illustration #5
Illustration #6
6. Pull back the bolt cocking handle to its fully-rearward
position and release. As it moves rapidly forward
under spring pressure, the bolt will strip a round from
the magazine and insert it into the chamber. (See
Illustration #7.) The rifle is now loaded and ready
to fire.
7. Place the rifle back on “SAFE.” (See Illustration #2.)
Illustration #7
Round being stripped from magazine.
WARNING! The rifle is now loaded and will fire if the safety lever is moved
downward to the “FIRE” position and the trigger is pulled! Handle with extreme
caution and keep the muzzle (the end of the barrel) pointed in a safe direction!
To Fire the Rifle
1. Keeping the 10 Commandments of Firearm Safety in mind, aim the rifle downrange at
the target. When firing this rifle you may need to experiment with different shooting styles until
you find the method which best suits your intended use. Remember to always fire the rifle in
such a manner that you can maintain a safe muzzle direction at all times.
2. Disengage the safety lever by moving it to the "FIRE" position. (See Illustration #3.)
3. After aligning the sights on your target, place your finger inside the triggerguard and on
the trigger.
4. Slowly pull the trigger fully rearward to fire the first round. If nothing happens, ensure that the
selector lever is in the downward “FIRE” position and try again.
5. Being a semi-automatic rifle, the rifle’s action (its moving parts) will cycle after the first round is
fired. As the bolt moves rearward, the extractor will pull the empty cartridge case
from the chamber and eject it from the rifle. (Make sure there are no bystanders in
close proximity on either side of the rifle who could be injured by the ejected
cartridge case or gasses expelled from the rifle.)
NOTE: If the trigger is pressed again, the rifle will fire! Keep the rifle pointed
in a safe direction. Keep your fingers away from the muzzle when firing the gun.
6. Firing may be continued in this manner until the magazine is empty.
7. When firing is finished, place the safety lever in the “SAFE” position. (See Illustration #2.)
WARNING! The barrel, gas block and gas tube will be very hot after firing!
WARNING! Keep your fingers away from the muzzle!