Manual

X9 Pistol Disassembly

To disassemble the pistol for cleaning and maintenance, first ensure the pistol is

unloaded by removing the magazine and then pulling back the operating handle

and visually checking the chamber to ensure there is no round of ammunition

present. Then follow the steps below.

WARNING! You should wear eye protection, such as shooting glasses or

goggles when disassembling and re-assembling your pistol to protect your eyes

from tensioned parts, such as springs, that could become dislodged during the

during the following procedures.

Illustration #5

STEP 1: Using a metal punch,

push in on the barrel housing

pin located on the left side of

the pistol.

Illustration #6

STEP 2: Pull out the

barrel housing pin from

the pistol’s right side.

Illustration #7

STEP 3: Using a punch, push

in on the barrel housing bush-

ing situated on the right side

of the pistol.

Illustration #8

STEP 4: Pull out the barrel housing

bushing from the left side of the

pistol.

Illustration #9

STEP 5: While firmly holding the pistol’s grip

with one hand, pull the upper receiver upward

with the other hand.