Manual

Page 9 © Century International Arms, Inc. Shooters Arms Model X9 Pistol
Illustration #11
STEP 7: Position the bolt handle in the rear-
most section of the bolt handle slot (in align-
ment with the circular cut-out); then twist and
pull upward to remove the bolt handle.
Illustration #12
STEP 8: Tilt the upper receiver to allow
the bolt to slide out from the rear of
the upper receiver.
Illustration #10
STEP 6: Pull out the buffer assembly
from the rear of the upper receiver.
Illustration #13
STEP 9: If it is necessary to remove the trig-
ger assembly, push the c-lock washer of the
trigger pin (situated on the let side of the pis-
tol) with a metal punch to remove it.
No further disassembly is needed
for routine cleaning.
If your pistol becomes excessively fouled or requires repair and/or maintenance follow the steps
below for further disassembly.
X9 Pistol Disassembly