Specifications

CW2500 Insert Installation and Operation Manual
53
Center the insert into the
fireplace opening. Adjust its
height using the leveling
bolts on each side of the
convection air jacket box
until the faceplate is
properly seated on the floor
of the hearth extension.
Once the faceplate is
assembled, align the
notches, located at the top
of each side of the
faceplate opening, with the
top of the insert and slide
the assembly toward the
front of the insert (see
DETAIL A).
Then install one faceplate
retainer spring on each side
of the faceplate and attach
the other end of the spring
to the holes in the slanted
part on the left and right
sides of the of the
convection air jacket as
shown in DETAIL B.
Push the faceplate against
the fireplace’s front.