Specifications

CW2500 Insert Installation and Operation Manual
55
3. Repeat steps 1 and 2 for the two tubes
in the back then install the baffle before
installing the two front tubes.
4. To remove the tubes use the above
steps in reverse order.
Note that secondary air tubes (A) can be replaced without removing the baffle board (B).
Important Notes:
The air tubes are identified for placement as follows:
Model Type of tube
CW2500 insert Front ► 42 holes of 0.141"
Middle front ► 42 holes of 0.141"
Rear ► 42 holes of 0.141"