CENTURY® ELECTRIC MOTORS CATALOG • 1100 • 2012-2013 Stock Motor Catalog 1100 Formerly A. O. Smith Electrical Products Company 1325 HEIL QUAKER BLVD. LAVERGNE, TN 37086 PH: 800-672-6495 FAX: 800-468-2062 centuryelectricmotor.
Formerly A. O. Smith Electrical Products Company A Regal Brand Formerly A. O. Smith Electrical Products Company Our product brand name has changed. V-Green Variable speed ECM design with integrated user interface A. O. Smith Distribution Motors will now carry the Century brand name.
www.centuryelectricmotors.
Table of Contents 3-3/8” DIAMETER HVAC STOCK MOTORS Draft Inducer Motors (with switch) . . . . . . . . . . . . . . . . . . 28-29 Draft Inducer Motors (without switch) . . . . . . . . . . . . . . . . . . 29 GE 11 Frame Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Open Fan Cooled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-34 Open Ventilated Fan and Blower Duty . . .
Table of Contents PUMP MOTORS C-Face, Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Carbonator Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 Close-Coupled, Open Dripproof, Capacitor Start . . . . . . . . . . 221 Close-Coupled, Open Dripproof, Three Phase . . . . . . . . 217-218 Close-Coupled, TEFC, Three Phase . . . . . . . . . . . . . . . .
Speed Engineered® Motors Motors specially designed, tested and warranted to be Corona-Free for compatible inverter duty are marked in this catalog with a J. Why Specify Speed Engineered® Inverter Duty Motors? Variable frequency drives (VFDs), while offering advantages of greater control and energy savings to commercial and industrial motor users, can also cause premature winding failure in motors not designed specifically for inverter duty. Now Century engineers have developed a solid solution...
Speed Engineered® Motors E-Plus® 3 Speed Engineered® Inverter Duty Motor At Century®, we build a motor able to withstand voltage peaks 3.5 times what is stated on the motor nameplate. Therefore we design additional insulation (tape, sleeving, phase paper, etc.) and strategically locate this added insulation in a manner that will yield the necessary protection against the high voltage pulses that may occur between magnet wire strands. This approach yields the desired design integrity.
Index of Footnotes No.
Index of Footnotes No. 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 Footnote Description Four studs on a 5.
C Frame Pages 9-11 Product Line 2-75W Unit Bearing Motors Pages 12-18 Centrifugal Blowers Pages 19-27 33⁄8” Motors Pages 28-36 45⁄16” Motors Pages 38-39 5” Motors Pages 40-56 55⁄8” Motors Pages 57-83 61⁄2” Motors Pages 84-85 NEMA 48-449T Frame — Single and Three-phase ODP and Totally Enclosed Motors Pages 133-192 Pool & Spa Motors Page 193-215 Commercial Pump Motors Page 216-222 Parts and Accessories Pages 231-243 Capacitors Page 234 8 Universal Electric® www.centuryelectricmotor.
C Frame Motors Direct Replacement Motors CO1550 CO1551 CO1552 RPM/ Speeds 3000/1 3000/1 3000/1 3000/1 3000/1 3000/2 3000/2 Volts 120 120 120 120 120 120 120 CO1554 CO1555 SS-613 Nutone UL Listed and CSA Certified Stack Size 1/2” 1/2” 5/8” 3/4” 3/4” 7/8” 7/8” CO1553 Amps 0.51 0.89 1.08 0.93 0.96 1.15 1.47 Stock Number SS-613 C01550 C01555 C01553 C01552 C01551 C01554 Shaft Dia. Rotation and Length Shaft End .217” x 2.51” CCW .217” x 1.75” CCW .217” x 2.34” CCW .217” x 1.80” CCW .217” x 1.
C Frame Motors Direct Replacement Motors Features: • CSA Certified • Fan Blades • Mounting Hardware • Mechanically reversible • Single & Two-Speed • Shaded Pole Type A Type B • UL Recognize Type C C-Frame motor fans sold separately. See page 233. Type D Type E Designed to replace many 3.3” diameter & “C” Frame Motors, used on commercial & domestic refrigeration applications, as well as exhaust fans, range hoods, heaters, ventilators, evaporators and many other air moving applications.
C Frame Motors Direct Replacement Motors Type A Type B Type C 120 Volt, Evaporative Fan Motors Stack Size 1/2” 1/2” 5/8” RPM/ Speeds 3000 3000 3000 Volts 120 120 115 Stock Number C01336 C01334 C01335A Amps .20 .30 .40 Shaft Dia. and Length .125” x 1.30” .187” x 1.66” .187” x 1.67” Rotation CWSE CWSE CWSE Motor Type C B A Gem EM336 EM334 EM335 Industry Reference For Gibson/Frigidaire For Admiral For Admiral Notes 77 64 64 Notes: 64. Spade Connector 77.
Unit Bearing Fan Motors Features: • Aluminum & Cast Iron • All Models Include Vibration Dampening Hub Washer, Speed Nut and 4 Mounting Screw • • • • Continuous Duty, Air Over 60/50 Hz Shaded Pole 115 & 230 Volt • Totally Enclosed • UL & CSA Recognized • Horizontal and shaft up mounting only CAST IRON - TWO MOUNTING FEET Watts Output 2 4 4 4 4 5 6 6 9 9 9 9 16 16 16 16 RPM 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 1550 Volts 115 115 115 230 230 115 115 115 115 115 230 2
Energy Saving ECM Motors Features: • • • • • • • • • Advanced ECM Design Up to 65% Efficiency Rain Shielded Cast Iron 13” Leads Lyall Plug UL Approved E128044 Wide temperature range oil for use in evaporators and condensers. Tapped & Drilled Mounting Holes Evaporator Mount - Standard 3-hole, 4-hole Hussmann Style Condenser Mount - Double boss Breakthrough motor design offers huge energy savings for the refrigeration market.
Unit Bearing Fan Motors Features: • Aluminum & Cast Iron • All Models Include Vibration Dampening Hub Washer, Speed Nut and 4 Mounting Screw • • • • Continuous Duty, Air Over 60/50 Hz Shaded Pole 115 & 230 Volt • Totally Enclosed • UL & CSA Recognized • Horizontal and shaft up mounting only CAST IRON - ONE MOUNTING FOOT Watts Output 2.
Unit Bearing Motors 16-25-35 WATT (1/50 to 1/20 HP) 50-75 WATT (1/15 HP) Features: Features: • • • • • • • • High Efficiency Cast Iron Fan Motors Horizontal and Shaft Up mounting only Watt Output 15 15 15 16 16 16 16 25 25 25 25 25 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 75 RPM 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Volts 115 115 115 115 115 230 230 115 115 115 230 230 115 115 230 230 115 115 1
Special Unit Bearing Replacement Motors Bally 285 Watt Output 50 RPM 1500 Speeds 1 Volts 230 Amps .85 Motor Dia. 3-7⁄8” Stock Number 285 Shaft Dia. & Length 5⁄16 x 1-1⁄2 Rotation CWLE Capacitor Shaded Pole “A” Dim 3.77 Cross Reference ESPOL50EM2B Notes Copeland 254 Watt Output 35 50 50 50 50 50 50 RPM 1500 1500 1500 1500 1500 1500 1500 Speeds 1 1 1 1 1 1 1 Volts 115 115 230 115 230 230 460 Amps 1.4 1.7 .85 1.7 .85 .85 .44 Motor Dia.
Special Unit Bearing Replacement Motors Hussmann 9211 Watt Output 13 RPM 1725 Speeds 1 Volts 115 Amps .47 Stock Number 9211 Rotation CW “A” Dim 2.93 Cross Reference 4410547, 441-547 Notes NEW! Ice-O-Matic 246, 254, 256 260 Watt Motor Stock Shaft Dia. “A” Output RPM Speeds Volts Amps Dia. Number & Length Rotation Capacitor Dim 16 1500 1 115 .80 3-7⁄8” 246 1⁄4”-20 THD. CWLE Shaded Pole 3.39 35 1500 1 115 1.4 3-7⁄8” 254 1⁄4”-20 THD. CWLE Shaded Pole 3.39 35 1500 1 230 .
Special Unit Bearing Replacement Motors Larkin Coil 277 Watt Output 15 RPM 1500 Speeds 1 Volts 115 Amps .60 Motor Dia. 3-7⁄8” Stock Number 277 Shaft Dia. & Length 5/16 x 7 Rotation CCWLE Capacitor Shaded Pole “A” Dim 3.32 Cross Reference 24-0366 Notes Manitowoc 250, 254 260 Watt Motor Stock Shaft Dia. “A” Output RPM Speeds Volts Amps Dia. Number & Length Rotation Capacitor Dim 25 1500 1 115 1.1 3-7⁄8” 250 1⁄4” x 20 THD CWLE Shaded Pole 3.39 35 1500 1 115 1.
General Purpose Centrifugal Blowers 55 CFM STOCK NO. 12 60 CFM STOCK NO. 9443 60 CFM STOCK NO. 9461 60 CFM STOCK NO. 9470 • 1/200-115-60/50-1-1550 • AMPS 0.25 • Sleeve Bearing • 1/100-208-240-60/50-1-3000 • AMPS .3/.3 • Sleeve Bearing • Replaces: Fasco 50747-D230, WWG 2C914 • 1/100-115-60-1-3000 • AMPS 0.5 • Sleeve Bearing • Replaces: Fasco 50747-D500 • 1/100-115-60/50-1-3200 • AMPS 0.6/0.8 • Sleeve Bearing • Includes Damper • Replaces: W.W.G.
General Purpose Centrifugal Blowers 320 CFM STOCK NO. 9486 • 1/25 • 115-60-1-1500 • AMPS 1.3 • Sleeve Bearing • Includes Mounting Flanges • Replaces: Fasco 50756-D500 455 CFM STOCK NO. 9478 • 1/10-115-60/50-1-1550/1200 • AMPS 1.5 • PSC • Two-Speed • Capacitor Included • Replaces: Fasco A455 500 CFM STOCK NO. 9491 • 1/10-115-60/50-1-1550/1200 • AMPS 3.5/2.2 • Sleeve Bearing • Two-Speed • Replaces: Fasco 50769- D500 326 CFM • • • • STOCK NO. 9467 1/12-115-60/50-1-1600 • AMPS 1.
OEM Direct Replacement Centrifugal Blowers Armstrong Air 85 CFM STOCK NO. 9495 Armstrong Air Bradford White 105 CFM 150 CFM STOCK NO. 9430 Consolidated Industries STOCK NO. 9458 90 CFM STOCK NO. 9619 • 1/30-115-60-1-3000 • AMPS 1.2 • Sleeve Bearing • Replaces: JA1N111, Armstrong Air, 41445-001 • 1/30-208-230-60-1-3000 • AMPS 0.6 • Ball Bearing • Replaces: UE JB1N075NS, Armstrong 42250-001 • 1/25-115-60-1-3300 • AMPS 1.
OEM Direct Replacement Centrifugal Blowers Nordyne 60 CFM STOCK NO. 9444 • 1/100-115-60-1-3000 • AMPS 0.6 • Sleeve Bearing • Replaces: Fasco 50747D600, Nordyne Nordyne 85 CFM STOCK NO. 9454 • 1/50-115-60-1-3000 • AMPS 1.1 • Sleeve Bearing • Replaces: Fasco A131, 7021-9132, Nordyne Nordyne Nordyne 90 CFM STOCK NO. 512A 90 CFM • • • • • 1/50-115-60/50-1-3000 • AMPS 1.0/0.77 • Ball Bearing • Replaces: Nordyne/Miller No. 303875000, UE JA1M151 STOCK NO. 965 1/20-115-60-1-3400 • AMPS 0.
Blower Reference Dimensions Stock No. 12 13 383 408 414 458 459A 460 464 512A 577 582 673 770 771 774 775 776 959 960 961 965 989 997 998 999 9411 9412 9413 9430 9437 9438 9443 9444 9445 9446 9447 9448 9454 9455 9457 9458 9459 9460 9461 9462 9465 9466 9467 9468 9470 9471 9477 9478 9483 9486 9491 9492 9493 9495 9496 9619 9620 9621 9622 A 6.27 6.27 6.39 6.27 6.27 7.84 8.51 8.56 6.27 6.27 7.10 6.27 7.09 6.39 6.39 6.39 6.39 6.39 7.10 7.10 7.10 9.27 5.25 7.10 8.59 7.09 8.56 8.51 5.25 7.13 4.47 7.10 6.32 6.
Blower Reference Diagrams 24 www.centuryelectricmotors.
CFM Specifications for Blowers Nameplate Static pressure (inches of water) CFM 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.
CFM Specifications for Blowers Nameplate Static pressure (inches of water) CFM 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.
Crossflow Blowers Crossflow/Tangential Blower Features: • Sleeve Bearing (Lubricant range from -40° to 400°F) • UL Listed and CSA Certified • 16 Mounting slots allow for Top, Bottom, Front, and Back Mounting (slot size .218 x .562 long) Applications: • Refrigeration, Food Service, Gas and Wood Burning Stoves and Fireplaces. Recommended Temp.: 30-150˚F D A J504 C F B J507, J510, J513 E Stack Size CFM RPM Volts Amps 7⁄8” 80 2600 120 0.50 7⁄8” 120 2600 120 0.90 1-1⁄8” 160 2600 120 1.
3-3/8” Diameter Stock Motors Draft Inducer Motors (With Switch) Features: • Draft Inducer Motors • Fan & Blower Duty • Shaded Pole OEM replacement for Lear Siegler-Miller, Intertherm, Coleman, Carrier, York, Johnson, Mid-Continent, Duotherm, Preway and others. 349 (Coleman) 2.63 B. C. 335 (Miller) 553 570 (Carrier) 571 (Carrier) 660 (Rheem) (Carrier) 653 (Rheem) 9409 (York) 357 (Mid Continent) HP RPM Speeds Volts Amps 1/125 3000 1 115 .46 1/50 3000 1 115/230 .81/.46 1/40 3000 1 115 .
3-3/8” Diameter Stock Motors Draft Inducer Motors (With Switch) Features: • Fan & Blower Duty • Permanent Split Capacitor OEM replacement for Carrier, Trane, York and others. HP RPM Speeds Volts Amps 1/20 1550 1 115/208-230 .71/.34-.38 1/16 3450 1 208-230 .41 1/8 3000 1 115 1.8 1/8 3000 1 208-230 .89 1/10 3400 1 460 .36 1/12 3400 1 460 .30 Stock Number 433 778 374 371 9526 9525 371, 374, 433 778 (CARRIER) 9525 (YORK) 9526 (YORK) Shaft Dia.
3-3/8” Diameter Stock Motors Open Ventilated Fan & Blower Duty Features: • Continuous Duty, Air Over • Shaded Pole 81 632 (Broan) 636 (Nutone) 633 (Broan) OEM replacement for Nutone, Broan, Fedders, McQuay, Bohn, Witt Coil, American Standard, Miami Carey, Duotherm, Coleman, Phil Rich, Chrysler and others. 14, 15, 18, 19, 26, 27, 28, 29, 949 370, 540 369 541 (Nutone) HP RPM Speeds Volts Amps 1⁄100 3000 1 115 .55 1⁄100 3000 1 120 .69 1⁄88 1320 1 115 .60 1⁄80 3000 1 115 .55 1⁄75 1550 1 115 .
3-3/8” Diameter Stock Motors Continued from previous page Open Ventilated Fan & Blower Duty Features: • Continuous Duty, Air Over • Shaded Pole & PSC 3325CW, 3325CCW 9631 (Krack), 9632 (Krack) 342 (McQuay) (Special 3.15 B.C.D.) 574 (Larkin), 575 (Larkin) OEM replacement for American Standard, Bohn, Broan, Chrysler, Coleman, Duotherm, Fedders, McQuay, Miami Carey, Nutone, Phil Rich, Whitt Coil and others.
3-3/8” Diameter Stock Motors Totally Enclosed Fan & Blower Duty Features: • • • • Continuous Duty, Air Over Dependable Quiet Sleeve Bearings Shaded Pole • Totally Enclosed Construction Single Shaft • 115 & 230 V 9629 (Krack), 9630 (Krack) • 60 Hz 674 (Ebco) 9627 (Krack), 9628 (Krack) Applications: Where high humidity or dust might cause open ventilated motors to fail.
3-3/8” Diameter Stock Motors Room Air Conditioning & Double Blowers Features: • Continuous Duty, Air Over • Double Shaft • Open and Closed Construction Applications • Thermally Protected • Shaded Pole & PSC • 60 Hz 9449 356, 447, 757 377 (Gibson) Applications: Double Blower • Room Air Conditioning • Heaters OEM replacement for Day & Night, Carrier, Trade Wind, Thermador, Gibson, Sears, Whirpool, etc.
3-3/8” Diameter Stock Motors Open Fan Cooled Features: • • • • Internally Fan Cooled Shaded Pole 60 Hz and 60/50 Hz 77 for Jenn Air 70 CR 9487 (TECUMSEH) 77 (JENN AIR) 951 OEM replacement for Tecumseh, Lau, Sears, Jenn Air, Lear Siegler humidifiers and similar applications. 307 HP RPM Speeds Volts Amps 1⁄60 1550 1 115 .73 1⁄60 1550 1 115 .73 1⁄30 1550 1 115 1.0 1⁄30 3000 1 115 1.12 1⁄25 1550 1 115 1.2 1⁄12 1500 1 230 1.
3-3/8” Diameter Stock Motors GE 11 Frame Replacements Features: • All Angle Sleeve Bearing • Insulation Class B • Open Fan Cooled (9439 is Air Over) • Shaded Pole • Single Speed 9653, 9654, 9655, 9656, 9657, 9658, 9659, 9660, 9661, 9662, 9664, 9665, 671B, 672B • Thermally Protected • UL, CSA Approved • 1-3/4” Resilient Rings (except 981 9336, and 9439) • 2.84 B.C.
3-3/8” Diameter Stock Motors Totally Enclosed Fan Cooled Features: • Shaded Pole & PSC • 60 Hz OEM replacement for Coleman, Tjerlund, Trane, Frigidaire, McQuay and similar applications. HP 1⁄25 1⁄20 1⁄20 1⁄20 1⁄20 1⁄20 1⁄20 1⁄20 1⁄20 1⁄15 1⁄15 1⁄8 RPM 1550 1550 1550 1550 1550 3000 3000 3000 3200 3000 3000 3000 Speeds 1 1 1 1 1 1 1 1 1 1 1 1 994, 995, 9450 982, 988 351 91, 418, 419 38 40, 41 Volts 115 115 115 115/230 115/230 115/230 115/230 115/230 115 115/230 115/230 115 Amps 1.2 1.5 1.5 1.5/.
3-in-1™ 3.3” Diameter PSC Motor heatcraft replacement motors bohn, chandler, climate control and larkin TM Motor 3-in-1 0 HP 5, 1/2 1 / 1 , /12 nt ces 1 Efficie Repla w o L nd igns PSC a e Des l o P d Shade lug Reversing p y s for ea nge ta ro tion cha Direct Drop-in Replacement for walk-in cooler evaporator fans Stock No.
4-5/16” Diameter Stock Motors Heating, Ventilating & Welding Units Features: Applications: • • • • • • Roof & Wall Ventilators • Condenser Fans • Direct Drive Blowers • Unit Heaters • 78 For use on Jenn Air 80 CR • Furnace Fan • Ventilating Units • 97 For use on Intertherm Furnaces TAC 900, 950, 1033, 1043, 1050 R70 & M7G Auto Protector Continuous Duty, Air Over Shaded Pole & PSC 3/8” Diameter Shaft 60 Hz 97 (Intertherm) OEM replacement for Luxaire, Home, Lau, Taylor Freezer, Slirpy, Duotherm, Loren C
4-5/16” Diameter Stock Motors Fan Coil Units • • • • • • 341 52, 53, 54, 55, 363, 364 Features: Auto Protector Continuous Duty, Air Over Shaded Pole 60 Hz Direct Drive Blowers 341 for use on welding equipment 543 (FEDDERS) 322 407, 420 OEM replacement for Trane, Dunham-Bush, American Standard, Nesbitt, York, Fedders, Carrier, U.S. Air and other fan coil unit applications.
5” Diameter Stock Motors Refrigeration – Unit Heaters – Space Heaters, GE 21/29 Frame Replacements– Mechanically Reversible 9666 604 Features: • • • • • • • • • • • For 1/2” Shaft Applications use Stock No 1306 Shaft Bushing • Holes Provided for Conduit Connector • Refrigeration Cabinets • Replaces Most G.E.
5” Diameter Double Shaft Fan/Blower Motors Less Base Fan Coils - Dual Wheel Blower Features: • • • • • • • • • Auto Protector 1/2” Dia. - Flatted Shafts 42 Frame (5.0 Dia.) 60 HZ only Open Construction 2-1/2” Dia. Rings Sleeve Bearing Shaded Pole 40° C Ambient HP 323A, 389A, 393A, 9670, 9672 323 379, 389, 393, 640 9615 RPM Speeds Volts Amps Stock Number Rotation Dim. Ref.
5” Diameter Double Shaft Fan/Blower Motors Less Base Fan Coils - Dual Wheel Blower Features: • • • • • • • • • 347 348 Auto Protector 1/2” Dia. - Flatted Shafts 42 Frame (5.0 Dia.) 60 HZ only Open Construction 2-1/2” Dia. Rings Sleeve Bearing Shaded Pole 40° C Ambient 348A DBL6409NB 9671, 9689 9675 DCL4421, DCL4422 HP 591, 745 (First Co.) RPM Speeds Volts Amps Stock Number Rotation Dim. Ref.
5” Diameter Double Shaft Fan/Blower Motors Less Base Fan Coils - Dual Wheel Blower Features: • • • • • • • • 747 (First Co.) Auto Protector 1/2” Dia. - Flatted Shafts 42 Frame (5.0” Dia.) 60 HZ only Open Construction 2-1/2” Dia. Rings Sleeve Bearing 40° C Ambient 9408 596 (Singer) DC4001 372, 373 (Trane) 670, 748 (First Co.), 9614 466 (York) DC4522 382, 9475 DCA4522 (First Co.
5” Diameter Double Shaft Fan/Blower Motors ECM Fan Coil Replacement Motor Comfort Select~F C Features: • • • • • TM Drop-in replacement Single phase Brushless DC 5 1/8” diameter 54” lead length CS89 The Affordable Energy Saver Applications: Fan Coils, Air Conditioners, Blowers, Shaded Pole, PSC Retrofit, Trane, Carrier, Amana, GE, Fan Coil & PTAC Units. HP 1⁄10 RPM 1100,900,700 Speeds 3 Volts 120 Amps 1.5 Stock Number CS89 Shaft Dia. & Length 9.3 x 1/2” x 9.
5” Diameter Double Shaft Fan/Blower Motors Resilient Base Fan Coils - Dual Wheel Blower DBL4404, DB4405, 7DB6408, DBL6406, DBL6409, DB6407, 7RAB4010, DBL64062, DB64072 Features: • • • • • • • • • • Auto Protector Continuous Air Over Open Construction Resilient Base Sleeve Bearing 1/2’’ Dia.- Flatted Shafts 40° C Ambient 3-1/2” Shaft Height 60 HZ only 42 Frame (5.0” Dia.
5” Diameter Double Shaft Fan/Blower Motors Resilient Base Fan Coils - Dual Wheel Blower Features: • • • • • • • • • • • Auto Protector Continuous Air Over Min. 36” leads Open Construction Resilient Base Sleeve Bearing 1/2’’ Dia.- Flatted Shafts 40° C Ambient 3-1/2” Shaft Height 60 HZ only 42 Frame (5.0” Dia.) 638 (Ice Cap), 950 (Ice Cap) DBL4500V1, DBL6501V1, DB6502V1 9652 RPM Speeds Volts Amps Stock Number Rotation Capacitor Dim. Ref.
5” Diameter Double Shaft Fan/Blower Motors Resilient Base Fan Coils - Dual Wheel Blower 642 (Trane) Features: • • • • • • • • • • • 955 (Trane), 945 (Trane), 467A Auto Protector Continuous Air Over Min. 36” leads Open Construction Resilient Base Sleeve Bearing 1/2’’ Dia.- Flatted Shafts 40° C Ambient 3-1/2” Shaft Height 60 HZ only 42 Frame (5.0” Dia.
5” Diameter Single Shaft Open Fan/Blower Motors Furnace Blowers – Attic Ventilators – Air Handlers – Fan Coils Features: • Continuous Duty, Air Over • Shaded Pole • 60 Hz • Auto Protector • 40˚C Ambient OEM replacement for: Intertherm, Triangle Engineering, Butler Ventimatic, Tuttle & Bailey, Leigh Products, Nutone, Kool-O-Matic, Luxaire, Duotherm, Lennox, Coleman, Lear Siegler, Bryant, Janitrol, Westinghouse, American Standard, Miller, Johnson, Preway, etc.
Continued from previous page 5” Diameter Single Shaft Open Fan/Blower Motors Furnace Blowers – Attic Ventilators – Air Handlers – Fan Coils Features: • Continuous Duty, Air Over • Shaded Pole • 60 Hz • Auto Protector • 40˚C Ambient • 1/2” Dia.
Continued from previous page 5” Diameter Single Shaft Open Fan/Blower Motors Furnace Blowers – Attic Ventilators – Air Handlers – Fan Coils Features: • Continuous Duty, Air Over • Shaded Pole • 60 Hz • Auto Protector • 40˚C Ambient • 1/2” Flatted Shaft OEM replacement for: Intertherm, Triangle Engineering, Butler Ventimatic, Tuttle & Bailey, Leigh Products, Nutone, Kool-O-Matic, Luxaire, Duotherm, Lennox, Coleman, Lear Siegler, Bryant, Janitrol, Westinghouse, American Standard, Miller, Johnson, Preway, et
Continued from previous page 5” Diameter Single Shaft Open Fan/Blower Motors Furnace Blowers – Attic Ventilators – Air Handlers – Fan Coils Features: • Continuous Duty, Air Over • Shaded Pole • 60 Hz • Auto Protector • 40˚C Ambient • 1/2” Flatted Shaft OEM replacement for: Intertherm, Triangle Engineering, Butler Ventimatic, Tuttle & Bailey, Leigh Products, Nutone, Kool-O-Matic, Luxaire, Duotherm, Lennox, Coleman, Lear Siegler, Bryant, Janitrol, Westinghouse, American Standard, Miller, Johnson, Preway, et
5” Diameter Single Shaft Open Fan/Blower Motors Furnace Blowers – Air Handlers – Fan Coils – Air Conditioning Features: 485 (Whalen) • Auto Protector • Continuous Air Over • Open Construction • Permanent Split Capacitor 954, 9608 (Trane) • 1/2” Dia. Flatted Shaft • 42 Frame • 60 Hz • Sleeve Bearing OEM Replacements for: Reznor, Luxaire, Armstrong, Payne, Day & Night, Bryant, Bohn, Intertherm, Kodair, Dole, Coleman, Janitrol, Steward Warner, International Heater Etc.
5” Diameter Single Shaft Open Fan/Blower Motors Continued from previous page Furnaces – Air Handlers – Fan Coils – Air Conditioning Features: • • • • Auto Protector Continuous Air Over Open Construction Permanent Split Capacitor • • • • 1/2” Dia. Flatted Shaft 42 Frame 60 Hz Sleeve Bearing OCP0251 (Copeland) BL6541 OEM Replacements for: Reznor, Luxaire, Armstrong, Payne, Day & Night, Bryant, Bohn, Intertherm, Kodair, Dole, Coleman, Janitrol, Steward Warner, International Heater Etc.
5” Diameter Single Shaft Open Fan/Blower Motors Furnaces – Air Handlers – Fan Coils – Air Conditioning Features: • • • • OCP0250 (Copeland) Auto Protector Continuous Air Over Open Construction Permanent Split Capacitor • • • • BL6519V1, B6520V1, BL6530 1/2” Dia. Flatted Shaft 42 Frame 60 Hz Sleeve Bearing OEM Replacements for: Reznor, Luxaire, Armstrong, Payne, Day & Night, Bryant, Bohn, Intertherm, Kodair, Dole, Coleman, Janitrol, Steward Warner, International Heater Etc.
5” Diameter Totally Enclosed Fan/Blower Motors Unit Heater Features: • Continuous Duty, Air Over • PSC and Shaded Pole • 60 Hz • Auto Protector • Sleeve Bearing • 40˚C Ambient • 42 Frame • 1/2” Dia. Flatted Shaft 360 380 U6520 U6432 U6521 978 (Sterling Radiator) U6430 U6431 U6433 PSC HP 1/8 1/8 1⁄6 1⁄6 RPM 1075 1075 1075 1075 Speeds 1 1 1 1 Volts 115 115 115 115 Amps 2.6 2.6 2.6 2.
5” Diameter MultiFit® Condenser Fan Motors Replaces Hundreds of 1/4 - 1/12 HP Applications Features: • • • • • All angle mount Ball bearing Class B insulation Double sealed ball bearings Energy efficient PSC design $ • Reversing plug • Single speed • 60˚ C ambient • 60 HZ • 36” leads • 1/2” Dia. flatted shaf • Totally enclosed • Multi-horsepower, one simple connection • Multi-mounting system Included One simple connection eliminates having to select various speeds or change capacitor sizes.
5-5/8” Diameter Stock Motors Heating & Air Conditioning Features: Applications: • • • • • • • • • • Continuous Duty, Air Over Mechanically Reversible PSC Sleeve Bearing Thermally Protected 60 Hz Condenser Fans Direct Drive Blowers 1/2” Flatted Shaft Energy Efficient $ 495B, 494B OEM replacement for Lennox, Luxaire, Chrysler, Johnson, Armstrong, Heil Quaker, Miller, Lear Siegler, Tappan, Modernaire and other air conditioning and heating applications.
5-5/8” Diameter Single Shaft Fan/Blower Motors Furnaces – Air Handlers – Fan Coils Features: • • • • Auto Protector Continuous Air Over Energy Efficient $ Multiple Mount • • • • Open Construction Sleeve Bearing 1/2” Dia. - Flatted Shaft 26” Leads (Minimum) • • • • 48 Frame (5-5/8” Dia.
5-5/8” Totally Enclosed Fan/Blower Motors Unit Heater Fan Motors Features: • Continuous Duty, Air Over • Permanent Split Capacitor • Sleeve & Ball Bearing Models • Thermally Protected • 60 Hz • 48Y Frame 136A UH1016, US1016 OHS1004 (Hussman) UH1016NB HP 1/8 1/6 1/6 1/6 1/6 1/6 1/6 1⁄6 1⁄6 RPM 1550 1075 1075 1075 1075 1075 1075 1075 1140 Speeds Volts 1 230 1 115 1 115 1 115 1 115 1 115 1 115 2 115 1 115/208-230 Amps 1.0 2.8 2.8 2.2 2.2 2.2 2.2 2.4 2.1/1.
Continued from previous page 5-5/8” Totally Enclosed Fan/Blower Motors Unit Heater Fan Motors UHH1026 Features: • • • • • • Continuous Duty, Air Over Permanent Split Capacitor Sleeve & Ball Bearing Models Thermally Protected 60 Hz 48Y Frame OHS1016 (Hussman) 731A UH1026NB UH1026V1 UH1026, US1026 566A OKT1026 (Kramer Trenton) HP 1/5 1⁄4 1/4 1/4 1/4 1/4 1/4 1⁄4 1/4 1⁄4 1/4 1⁄4 RPM Speeds Volts 1075 1 230 1075 1 115 1075 1 115 1075 1 115 1075 1 115 1075 1 115 1075 1 115 1135 1 115 1075/900 1 115/208
5-5/8” Totally Enclosed Fan/Blower Motors Unit Heater Fan Motors Features: • • • • • • Continuous Duty, Air Over Permanent Split Capacitor Sleeve & Ball Bearing Thermally Protected 60 Hz 48Y Frame HP 1/3 1/3 1/3 1/3 1⁄3 1/3 1/3 1/3 1⁄3 1⁄2 1⁄2 RPM 1075 1075 1075 1075 1140 1075 1100 1100 1725 1140 1725 UHH1036 UH1036V1 US1036 UH1036 Speeds Volts 1 115 1 115 1 115 1 115 1 115/208-230 1 208-230 2 230 2 115 1 115/230 1 115/208-230 1 115/230 Amps 5.3 5.3 5.3 5.3 3.3/1.7 2.2 1.7-1.1 4.3-1.8 2.9/1.5 5.6/2.
5-5/8” Diameter Double Shaft Fan/Blower Motors Room Air Conditioners Fan Coils - Blowers 9635A 170B (Carrier) SA1016 Features: • • • • • • • • • Auto Protector Sleeve Bearing CCWLE Rotation Continuous Air Over Energy Efficient $ Permanent Split Capacitor Semi-enclosed Construction 60 HZ 1/2” Dia.
Continued from previous page 5-5/8” Diameter Double Shaft Fan/Blower Motors Room Air Conditioners - Fan Coils - Blowers Features: • • • • • • • • • SA1026 DSB1024, DSB1024H, DSB1026, DSB1026H Auto Protector Sleeve Bearing CCWLE Rotation Continuous Air Over Energy Efficient $ Permanent Split Capacitor Semi-enclosed Construction 60 HZ 1/2” Dia.
Continued from previous page 5-5/8” Diameter Double Shaft Fan/Blower Motors Room Air Conditioners - Fan Coils - Blowers Features: • • • • • Auto Protector Continuous Duty, Air Over Energy Efficient $ Permanent Split Capacitor 1/2” Dia. Flatted Shafts • • • • CCWLE Rotation Sleeve Bearing Semi-Enclosed Construction 60 Hz • Lugs available separately • Use Kit No.
Continued from previous page 5-5/8” Diameter Double Shaft Fan/Blower Motors Room Air Conditioners - Fan Coils - Blowers • • • • • Auto Protector Continuous Duty, Air Over Energy Efficient $ Permanent Split Capacitor 1/2” Dia. Flatted Shafts • • • • • Lugs available separately • Use Kit No.
5-5/8” Diameter Fan/Blower Motors Room Air Conditioners - Fan Coils - Blowers Features: • Auto Protector • Open Construction • 1/2” Dia. • Continuous Air Over • Permanent Split Capacitor Flatted Shaft • Reversible • 24” Leads • Energy Efficient $ • Fleximount • Sleeve Bearing Minimum 9421V1, 9422V1, 754A, 9431A, 9432A, 9647 • • • • 9435V1A (Titus) 40˚-50˚-60° C Ambient 48 Frame (5-5/8” Dia.
5-5/8” Diameter Stock Motors Direct Drive Fan & Blower Motors Features: • Auto Protector • Continuous Duty, Air Over • Energy Efficient $ • Electrically Reversible • Permanent Split Capacitor • Sleeve & Ball Bearing OEM replacement for Bard, Chrysler, York, Armstrong, Johnson, Janitrol, Bohn, Lennox, Copeland, Fedders, Heil Quaker, American Standard, Bryant, Westinghouse, Carrier, Peerless and others.
Continued from previous page 5-5/8” Diameter Stock Motors Direct Drive Fan & Blower Motors Features: • • • • Auto Protector Continuous Duty, Air Over Electrically Reversible Permanent Split Capacitor BDH1036, BDH1054, BDH1076 • Energy Efficient $ • Sleeve & Ball Bearing • 60˚C Ambient OEM replacement for Bard, Chrysler, York, Armstrong, Johnson, Janitrol, Bohn, Lennox, Copeland, Fedders, Heil Quaker, American Standard, Bryant, Westinghouse, Carrier, Peerless and others.
5-5/8” Diameter (High Efficiency) Indoor Blower Motors Direct Drive Fan & Blower Motors FDL1016, 7FD1016, FDL1024, FD1024, FDL1026, FD1026, 7FD1026, FDL1034, FD1034, FDL1036, FD1036, 7FD1036, DLR1026, DLR10236 Features: • • • • • Auto Protector Continuous Air Over 23” Leads (Minimum) 60 HZ Resilient Mounting Ring Included • • • • Open Construction Permanent Split Capacitor High Efficient $ Multiple Mount • • • • 1/2’” Dia.- Flatted Shaft 40°, 50˚ and 60˚C Ambients 48 Frame (5-5/8” Dia.
Continued from previous page 5-5/8” Diameter (High Efficiency) Indoor Blower Motors Comfort SelectTM~FB High Efficient Furnace Blower Motors Utilizing ECM Technology CSL1056, CSL1106, CS1056, CS1106 Features: • Peak efficiency of 82% • Automatic detection of correct rotation for both backward and forward curved blowers • Learn mode that provides improved efficiency and greater flexibility for matching PSC motor performance in a furnace/air-handler unit HP 1/2 1 1/2 1 RPM 1100-600 1100-600 1100-600 110
Continued from previous page 5-5/8” Diameter Stock Motors (High Efficiency) Direct Drive Fan & Blower Motors Features: • • • • • • Auto Protector Continuous Air Over High Efficient $ Open Construction Multiple Mount Reversible • • • • • • Permanent Split Capacitor 1/2’” Dia. - Flatted Shaft 22” Leads (Minimum) 48 Frame (5-5/8” Dia.
5-5/8” Diameter (Standard Efficiency) Indoor Blower Motors Fan Coils - Dual Wheel Blower DL1036 Features: • • • • Auto Protector Class B Insulation Continuous Air Over Lead Reversible • • • • Open Construction Permanent Split Capacitor 40° C Ambient Sleeve Bearing • Standard Efficiency • 2-1/4” Rings with 2-1/2” Adapters included • 26” Leads • 48 Frame (5-5/8” Dia.
5-5/8” Diameter (MasterFit®Pro) Multi-horsepower Replacement Motors Features: • • • • • FD6000A Energy Efficient $ 60 HZ Permanent Split Capacitor Reversible Extended Thru Bolts • • • • 40° C Ambient, Class B Insulation for Blower Motors 70° C Ambient, Class F Insulation for Condenser Fan Motors Rheem Mounting Holes in Shell All Purpose Capacitor Included All purpose capacitor included Condenser Fan Motor • Totally Enclosed Stock Number FE6001F FE6003F FE6000F FE6002F FE6004F HP 1/3 1/4 1/5 1/6
5-5/8” Diameter Multi-horsepower Replacement Motors Features: • Energy Efficient $ • Different Capacitor/ Speed Combinations • Designed for 370V Capacitor (not furnished) • Permanent Split Capacitor • Ball and Sleeve Bearing • Rotation Reversible • Resilient Rings on Blower Motors • • • • • • • Extended Thru Bolts Automatic Protector Class B Insulation 48 Frame Single Phase Continuous Duty – Air Over Mounts by Belly Band, Thru Bolts or Shell Holes • Rheem Mounting Holes in Shell • 60 Hertz Benef
5-5/8” Diameter (4-in-1®) Multi-horsepower Replacement Motor 4-in-1® and HeatMaster® Condenser Fan Motor Features: • • • • All Angle Mounting Energy Efficient PSC Design $ Removable Drain Plugs Each End Rheem Mounting Holes (Screws Included) • Totally Enclosed • 48Y Frame • • • • • • • Class B or F Insulation Multi-application, Condenser Fans Reversible 60˚ or 70˚ C Ambient Sleeve or Ball Bearing UL and CSA Approved 36” Leads or 48” Leads ORM5458 ORM5458F Easy installation, one simple connection and a
5-5/8” Diameter (Open Lead End) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration Features: • • • • • • • FS1024S 735 Energy Efficient $ Permanent Split Capacitor Class B Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Open Lead End) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Open Lead End) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration FH1056S Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Totally Enclosed) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration FSE1016SV1, FSE1026SV1 FE1008SF, FSE1008SF, FE1018SF, FSE1018SF, FE1016SF, FSE1016SF, FE1028SF, FSE1028SF, FE1026SF, FSE1026SF Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B or Class F Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Totally Enclosed) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration FSE1026, FE1026, 7FSE1026, FSE1024, FE1036, FSE1036 Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B or Class F Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Totally Enclosed) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B or Class F Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter (Totally Enclosed) - Outdoor Ball and Sleeve Bearing Condensers – Heat Pump – Refrigeration Features: • • • • • • • Energy Efficient $ Permanent Split Capacitor Class B or Class F Insulation Ball or Sleeve Bearing 1/2” Dia.
5-5/8” Diameter Deluxe Commercial Condenser Fan Motors Features: • Energy Efficient $ • Auto Protector • Class B or Class F Insulation • Heavy duty Ball Bearing • High Thrust Capacity • Reversible • “Patented” Fan Canopy • Vertical shaft up only • 48 Frame • 60˚ or 70˚ C Ambient • 60 HZ Only FC1046F 9428A SINGLE PHASE (Capacitor Not Included) (Single phase motors [except 1-1/2 HP] suitable for use with some solid state speed control devices) F.L. Amps HP RPM Volts 230V 460V 575V .
6-1/2” Diameter Stock Motors 56 Frame Vertical Condenser Fan Continuous Duty, Air Over Features: • • • • • Class B Moisture-Resistant Insulation Double Sealed Ball Bearing Permanent Split Capacitor Quick-Connect Design 1” (Minimum) Extended Thru Bolts • Reversible • 5/8” Dia.
6-1/2” Diameter Stock Motors 56 Frame Vertical Condenser Fan Continuous Duty, Air Over Features: • Auto Protector • Quick-Connect Design • Class B or F Moisture-Resistant Insulation • Reversible H564, H567, H667, H671, H767, H961, H963 • Double Sealed Ball Bearing • 5/8” Dia.
Outdoor Ball Bearing Condenser Fan Motors Features: Important: Use amps as well as HP for replacement reference. • • • • • Auto Protector Base Mounted Ball Bearing Capac. Mounted (Single Phase) Open Lead End Only FB1076V1 • Reversible • 1.
Evaporative Cooler Motors One and 2-Speed Evaporative Cooler Motor Features: Premium Moisture Resistance Windings (115 Volt) The evaporative cooler motor provides all the features needed to insure long, trouble-free life under the high moisture atmosphere of evaporative cooler duty.
48 & 56 Frame Special Purpose Motors E-Plus® Belted or Direct Drive Motors Features: • Ball Bearing • Bearings lubricated with Beacon 325 low temperature grease • Capacitor Start/Capacitor Run • • • • HP RPM Volts 1⁄2 1725 115/208-230 3⁄4 1725 208-230/115 Energy Efficient $ Class B Insulation Resilient Base Dripproof Full Load Amps Frame 5.2/2.8-2.6 56Z 4.2-4.0/8.
48 & 56 Frame Special Purpose Motors Pedestal Fan Motors Features: • • • • • • • • Class B Insulation Continuous Duty Service Factor 1.0 Permanent Split Capacitor and Split Phase Designs Thermally Protected Yoke Mount 40°C Ambient 60 Hz HP RPM Speeds Volts 1/4 1100 2 115 1/4 1725 1 115 1/4 1725 1 115/230 1/4 1725 1 115 1/3 1100 2 115 1/3 1725 1 115 1/3 1725/1425 2 115/230 1/2 1100 1 115 1/2 1725 1 115/230 1/2 1725 1 115 1/2 1725 1 115 1/2 840 1 115/230 Full Load Amps Frame 3.2 48Y 4.2 48YZ 3.6/1.
48 & 56 Frame Special Purpose Motors Nesbitt Replacement Motors Century® AC Motors Features: • Cushion Base • Permanent Split Capacitor • Service Factor 1.0 C031, CO34, CO35, CO36 • 40˚C Ambient • 60 Hz • 8 Pole C033 Applications: C032A Direct replacement for ITT Nesbitt HVAC wall units found in schools, hotels, hospitals and ceiling units located in auditoriums and gymnasiums.
Oil Burner Motors Applications: Domestic high and low pressure oil burners and other applications where 48M and 48N flange mounting is required. This line of motors includes open (enclosed except for shaft end bracket) and totally enclosed designs to meet all requirements. All mounting dimensions such as location of ears, diameter of rabbet fit and shaft size are in accordance with NEMA standards.
Century® and Universal Electric® Hot Water Circulator Pump Motors Features: • Bell and Gosset, S.A. Armstrong, Taco, Replacement Motors • Open Dripproof • Single-Phase • Special Red Paint • 60 Hz • Sleeve Bearing except as noted (Note 2) • Auto Protector OTA2004 HW2004L, HW2014L HW2014V1L C233, C241, C243, C245, C247 C248 C240, C242, C244, C246, HW200084L Applications: Replacement motors to be used on hot water pumps. For use with adjustable base.
Century®and Universal Electric® Hot Water Circulator Pump Motors Features: • 60 Hz • No Protector • Insulation Class B, except as noted (Note 87) • Reversible • Cushion Ring, No Base and C-Face • Bell and Gosset, S.A. Armstrong, Taco, Replacement Motors • Open Dripproof • Three-Phase • Special Red Paint H982, H982V1 H983, H983V1 H984, H984L H985L, H946L H947L, H986, H986L H987, H987L H988 H988L Applications: Replacement motor to be used on hot water pumps. For use with adjustable base.
O.E.M. – Direct Replacement Aaon OAN010, OAN460, OAN470 OAN1076, OAN1076V1 HP RPM Speeds Volts Amps 1/4 3200 1 460/380-415 0.9 1/3 1100 1 460 1.0 3/4 1075 1 208-230 5.4 3/4 1075 1 460 2.0 3/4 1075 1 460 2.75 3/4 1075 1 460 2.6 3/4 1075~920 1 460/380-415 2.8/1.8 OAN747, OAN140 Shaft Dia. & Length 3-1/4” x 1/2” 3-1/4” x 1/2” 3” x 1/2” 3-1/4” x 1/2” 4” x 1/2” 4” x 1/2” Motor Dia. 5-5/8” 5-5/8” 5-5/8” 5-5/8” 5-5/8” 5-5/8” “A” Dim. 5.49 4.74 7.36 7.11 6.36 6” 12.
O.E.M. – Direct Replacement Amana OAM10088, OAM1018 HP RPM Speeds Volts Amps 1/12 825 1 208-230 .5-.6 1/6 825 1 208-230 1.0-1.1 Stock Rotation Capacitor Number OAM10088 CWLE 5MFD/370V OAM1018 CWLE 5MFD/370V Shaft Dia. & Length 1/2” X 2-1/4” Motor Dia. 5-5/8” “A” Dim. 3-7/8” 1/2” X 2” 5-5/8” 4-3/8” Cross Reference 1871 K55BGZ-6813 1873 K55BGW-6814 Notes American Air Filter 0547A, 9618A HP RPM Speeds Volts Amps 1⁄8 700 1 115 2.1 1/4 1075 1 115 3.
O.E.M. – Direct Replacement Arcoaire 743A, 744A HP RPM Speeds Volts Amps 1⁄6 825 1 208-230 1.0 1/3 1075 1 208-230 2.5 Stock Capacitor Number Rotation 743A CCWLE 5MFD-370V 5MFD-370V 744A CCWLE Shaft Dia. Motor & Length Dia. 1⁄2” x 2-1⁄2” 5-5⁄8” 1⁄2” x 2-3⁄4” 5-5⁄8” “A” Dim. 4-1⁄8” 4-1⁄2” Cross Reference 24346302-03 24346301 Notes Arkla OKB1038, OKB1058 HP RPM Speeds Volts Amps 1/3 825 1 115 4.8 1/2 825 1 230 3.0 1/2 3/4 3450 3450 1 1 115/230 115/230 7.2/3.6 9.6/4.
O.E.M. – Direct Replacement Arkla, Tappan & SJC 582 HP 1⁄40 RPM 3000 Speeds 1 Volts 115/230 Amps 1.0/.50 Stock Number 582 Rotation CCWSE Capacitor Shaded Pole Shaft Dia. & Length BLOWER Motor Dia. 3-3⁄8” “A” Dim. 2-1/2” Cross Reference JA1C113 JB1C040 JA1C039 Notes Bohn (see Heatcraft) Broan 632 633 OBR40066, OBR40086, OBR40016 634 9649 HP 1⁄50 RPM 1400 Speeds 1 Volts 120 Amps .73 Stock Number 633 Rotation CCWLE Capacitor Shaded Pole Shaft Dia.
O.E.M. – Direct Replacement Butler Ventilator 9401 HP 1/10 RPM 1050 Speeds 1 Volts 115 Amps 3.4 Stock Number 9401 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length 1/2” x 2-3/4” Motor Dia. 5” “A” Dim. 3-1/4 Cross Reference 846PY4V D1066 7152-0081 Notes Carrier/BDP OCA10106, OCA10086 579, 580 570, 571, 660 778 9625, 9626 HP 1⁄20 RPM 3000 Speeds 1 Volts 115/230 Amps 1.8/.92 Stock Number 570 Rotation CCWLE Capacitor Shaded Pole Shaft Dia.
O.E.M. – Direct Replacement Continued from previous page Carrier/BDP OCB6427 513A OCB1026A, OCA10206A 170B OCT1026S 537 OCA1024 9650 OCA6427 OCA1016 OCC1026A OCA1014, OCA10208, OCA1026 OMM1026 Amps 1.1 1.3-0.8-0.6 0.9 .80-.95 Stock Number 170B 513A OCA1014 OCA1016 Rotation CCWLE CWLE CWLE CCWLE Capacitor 5MFD/370V 3MFD/370V 5MFD/370V 3MFD/370V Shaft Dia. & Length 8-1⁄2” x 1⁄2” x 8-1⁄2” 7” x 1⁄2” x 2-1⁄8” 1/2 x 2-1/8” 1/2 x 3-5/8” Motor Dia. 5-5⁄8” 5-5⁄8” 5-5/8” 5-5/8” “A” Dim.
O.E.M. – Direct Replacement Continued from previous page Carrier/BDP OCC1056 OCA1036, OCB1036A, OCF1036, OCE1036 OMM1036 OCD1036 655 OCA3074 OCB4036SP FEH1056S OCD1056, 5OCA3056 OCA1056, 5OCA1056 OCA3076, OCA3076H OCB1056 HP 1/3 1/3 1/3 RPM 1075 1075 1075 Speeds 2 2 4 Volts 208-230 208-230 115 Amps 2.5 2.5 4.8 Stock Number OCB1036A OCA1036 OCD1036 Rotation REV REV CCWLE Capacitor 5MFD/370V 5MFD/370V 5MFD/370V Shaft Dia.
O.E.M. – Direct Replacement Continued from previous page Carrier/BDP H978 H980 FB3154 H979 Stock Number FB3154 Rotation REV Capacitor 3 Phase Shaft Dia. & Length 5⁄8” x 2” Motor Dia. 6-1/2” “A” Dim. 9-7/8” H978 REV 3 Phase 5⁄8” x 3-5/8” 6-1/2” 11-3/8” H980L REV 3 Phase 7⁄8” x 2-5/16” 6-1/2” 12-5/8” 15.0/7.4 H979 REV 3 Phase 7⁄8” x 2-5/16” 6-1/2” 13-5/8” 15.0/7.
O.E.M. – Direct Replacement Consolidated Industries 643 9619, 9620, 9621, 9622 HP 1/30 RPM 3200 Speeds 1 Volts 115 Amps 1.35 Stock Number 9619 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length Blower Motor Dia. 3.38” “A” Dim. 3” 1/30 3200 1 115 1.35 9621 CCWLE Shaded Pole Blower 3.38” 3” 1/20 3200 1 115 1.73 9620 CCWLE Shaded Pole Blower 3.38” 3” 1/20 3200 1 115 1.73 9622 CCWLE Shaded Pole Blower 3.38” 3” 3/4 ~1/2~ 1100 1/3~1/4 4 115 10.6-8.98.
O.E.M. – Direct Replacement Day/Night/Payne ODN1036A HP 1/3 RPM 1075 Speeds 2 Volts 208-230 Amps 2.8 2 115 2.7-1.4 1⁄20~1⁄30 1550 359 Capacitor 5MFD/370V Shaft Dia. & Length 3-3/8” x 1/2” Motor Dia. 5-5/8” Shaded Pole 4” x 5⁄16” x 4” 3-3⁄8” Stock Rotation Number ODN1036A CWLE 359 CCWLE “A” Dim. 4.
O.E.M. – Direct Replacement Emerson (Chromalox) 656 HP 1⁄70 1⁄20 RPM Speeds 1550 1 1550 1 Volts 208-230/277 208-240/480 Amps Stock Number .75/.34 657 .26/.19 656 Rotation CWLE CWLE 657 Capacitor Shaded Pole Shaded Pole Shaft Dia. & Length Motor Dia. 5⁄16” x 3-5/8” 4-5⁄16” 5⁄16” x 1-1⁄2” “A” Dim. Cross Reference Notes 3-3⁄8” 2-3⁄4” AA2N080-084 Shaft Dia. & Length Motor Dia. “A” Dim.
O.E.M. – Direct Replacement Evcon 961 OEV1006 961 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length Motor Dia. 3-3⁄8” 3-1/4” 2702-3201A .5 OEV1006 CWLE 5.0MFD/370V 1/2” x 2 -3/4” 5” 3-3/8” F42B53A48 115 7.8 OEV6016 CCWLE Shaded Pole 1/2” x 2-1/4” 5” 3-7/8” 115 6.0 OEV1026 CCWLE 7.5MFD/370V 1/2” x 3” 5” 4-1/8” Shaft Dia. & Length Motor Dia. “A” Dim.
O.E.M. – Direct Replacement Fedders 396 543 OFE4536 ofe1016 OFE6417 OFE5001 OFE1034 Stock Number 515 C024 Shaft Dia. & Length Motor Dia. 1 3 3 1 Volts Amps 208-230 1.1 115 2.8-2.0-1.6 115 2.0 230 1.3 396 543 OFE4536 OFE1016 Rotation CCWLE CCWLE CCWLE CWLE 1350 2 208-230 1.5 OFE5001 CCWLE 1⁄4 1/3 1100 1400 1 3 208-230 208-230 1.5 2.2 515 OFE1034 CCWLE CCWLE 5MFD-370V 1⁄2” x 4” 5” 7.5MFD/370V 3-1/4” x 1/2” x 6-1/2” 5-5⁄8” 3⁄4 1075 1 208-230 6.
O.E.M. – Direct Replacement First Co./Summit 748 DCA4552 OFC1004, OFC1024 745 Stock Number 747 Included Shaft Dia. & Length 6-3/4 x 1/2 x 6-3/4” Motor Dia. “A” Dim. 5” 3-5/8” 1500 2 208-230 OFC1004 Rotation CCWLE 1⁄6 ~1⁄8 ~1⁄10~1⁄12 1550 1⁄6 ~1⁄8 ~1⁄10~1⁄12 1550 1/5 1550 4 4 3 120 5.0-3.3-2.9-2.4 745 120 3.7-1.9-1.7-1.4 748 208-230 1.
O.E.M. – Direct Replacement Friedrich OFR1016 HP OFR1036 1/6 RPM 1075 Speeds Volts Amps .8 1/3 1075 5 230 1.8 5 230 Stock Number Shaft Dia. & Length Motor Dia. “A” Dim.
O.E.M. – Direct Replacement Heatcraft 9209L, 9210L, 9209H, 9210H 9720A HP 9214L, 9214H 572A, 573A 574, 575 Shaft Dia. & Length Motor Dia. REV Included 5/16” x 3-1/4” 3-3/8” REV 7.5MFD-370V 1⁄2” x 2-3⁄4” 5-5⁄8” 1 1 1 1 1 115 208-230 115 208-230 208-230 Amps Stock Number 572A 573A 574 575 9720A Rotation CCWLE CCWLE CWLE CWLE CWLE 1550 1 115/208-230 1.1/0.5 9721 1075 1 208-230 4.2 992A 1⁄20 1⁄15 1⁄20 1⁄20 1/12 1550 1550 1550 1550 1550 Speeds 1/12 1⁄2 1.9 1.3 1.6 .90 0.
O.E.M. – Direct Replacement Heil-Quaker / I.C.P. OHQ1056 HP 1⁄50 1⁄50 1⁄40 1⁄6 RPM 3200 3000 3000 1110 Speeds 776 Volts Amps 1 1 1 1 230 115 115/230 208-230 .40 1.0 1.0-.50 1.03 1⁄3 1120 1 208-230 1.2 1/2 1050 4 115 11.0 Stock Number 673 776 673 582 690 Rotation CCWLE CCWLE CCWLE REV Shaded Pole Shaded Pole Shaded Pole 5MFD-370V 645A REV 5MFD-370V Capacitor 582 Shaft Dia.
O.E.M. – Direct Replacement Hussmann OHS1004 OHS10206 174A 9211 OHS9983 OHS1016 HP 1/8 RPM 1550 Speeds 1 Volts 230 Amps 1.0 Stock Number OHS1004 Rotation CWLE Capacitor 5MFD-370V Shaft Dia. & Length 1/2” x 2” Motor Dia. 5-5/8” “A” Dim. 3-3/4” 1⁄6 1/5 1625 1075 1 1 208-230 230 1.0 1.6 174A OHS1016 REV CWLE 5MFD-370V Included 1⁄2” x 2-1⁄2” 1/2” x 3” 5-5⁄8” 5-5/8” 4” 4-1/4” 1/5 1075 1 208-230 1.3 OHS10206 CWLE Included 1/2” x 3” 5-5/8” 4-1/8” 1/2 1725 1 208-230 2.
O.E.M. – Direct Replacement Ice Cap 638, 950 Speeds 3 Volts 115 Amps .87 Stock Number 638 Rotation CWLE Capacitor 4MFD-370V Shaft Dia. Motor & Length Dia. 6-1/2” x 3/8” x 6-1/2” 5” “A” Dim. 3-3/4” 1500 3 208-230 .7 950 CWLE 4MFD-370V 6-1/2” x 3/8” x 6-1/2” 5” 3-3/4” 1075 1 208-230 0.
O.E.M. – Direct Replacement Jenn Air 77 HP RPM Speeds Volts Amps 1⁄30 1550 1 115 1.0 1⁄15 1550 1 115 2.1 1⁄15 1550 1 115 2.3 1⁄10 1550 1 115 2.4 78 Stock Number 77 78 484 781 484 781 Rotation Capacitor Shaft Dia. & Length Motor Dia. “A” Dim.
O.E.M. – Direct Replacement Krack 9631, 9632 9633, 9634 9627, 9628 OKR1096 OKR1503 (Inverter Duty) 1/25 RPM 1550 Speeds Volts Amps Stock Number 1/25 1550 1 115 1/25 1550 1 1/20 1550 1/15 9629, 9630 Shaded Pole Shaft Dia. & Length 5/16” x 1-3/4” Motor Dia. 3-3/8” 3-1/4” CCWLE Shaded Pole 5/16” x 1-3/4” 3-3/8” 3-1/4” 9630 CCWLE Shaded Pole 5/16” x 1-3/4” 3-3/8” 3-1/4” 0.9 9628 CCWLE Shaded Pole 5/16” x 1-1/2” 3-3/8” 3-1/2” 115 2.
O.E.M. – Direct Replacement Kramer Trenton OKT1026 469 C662 OKT3035 Stock Number 396 OKT3041 Shaded Pole Shaded Pole Included Shaft Dia. & Length 5/16” x 2-1/2” 1⁄2” x 3-3⁄8” 1/2” x 2-1/2” Motor Dia. “A” Dim. 3-3/8” 5” 5-5/8” 3-1.4” 3-1⁄2” 4-7/8” 1/20 1⁄12 1/4 1450 1050 1075 1 1 1 208/230 115/230 115/208 1.1 2.7/1.3 3.0/1.5 396 469 OKT1026 Rotation CCWLE CCWLE CCWLE 1/3 1075 1 115/208-230 6.3/2.8-3.
O.E.M. – Direct Replacement Lear Siegler 9646 HP 1/8 RPM 1050 Speeds 1 Volts 115 Amps 4.2 Stock Number 9646 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length 1/2” x 2-7/8” Motor Dia. 5” “A” Dim. 3-3/4” Cross Reference Notes Lennox 9484 9485 964 HP 1/15 RPM 3400 1⁄15 1050 1⁄12 1050/875 1⁄10 3000 1⁄5~1⁄6~1⁄8 1075 Speeds 1 Volts 120 Amps 0.85 9496 9403 OLE1026 442C Stock Number 964 Rotation CCWLE Capacitor 3MFD/300VAC Shaft Dia. & Length 1-5/16” x 1-1/2” Motor Dia.
Continued from previous page O.E.M. – Direct Replacement Lennox OLE1038, OLE1038V1 OLE1036A OLG1036 9406A OLE1106, OLE1106H 9405A, OLE1036H HP 1/3 RPM 825 Speeds 1 Volts 230 Amps 2.8 Stock Number OLE1038 Rotation REV Capacitor 4MFD/370V Shaft Dia. & Length 1/2” x 3-7/16” Motor Dia. 5-5/8” 1/3 825 1 230 2.1 OLE1038V1 CCWLE 4MFD/370V 1/2” x 3-1/2” 5-5/8” 1/3 1075 4 115 6.0 OLE1036A CCWLE 5MFD/370V 1/2” x 5-1/8” 5-5/8” 1/3 1075 1 208-230 2.
O.E.M. – Direct Replacement Liebert C663 HP 3/4 RPM 1100 Speeds Volts 1 208-230/460 Stock Number C663 Amps 4.8-4.2/2.1 Rotation CCWLE Shaft Dia. & Length 5⁄8” x 4” Capacitor Included Motor Dia. 6-1/2” “A” Dim. 10-3/8” * K63HXEFY-4599 K63HXDFK-3912 K63HXEBD-4498 KCP48TG181S KCP49UG192S 8-184787-01 Cross Reference B-095D S89-084* Notes 59,241,266 Cross Reference 322P151 Notes Lomanco OLM6151 HP 1/10 RPM 1550 Speeds 1 Volts 115 Stock Number OLM6151 Amps 4.
O.E.M. – Direct Replacement Mid Continent 357 HP 1⁄30 1⁄30 RPM 3000 1550 Speeds 1 1 Volts 115 115 Amps 1.1 .97 Stock Number 357 400 400 Rotation CCWLE CCWSE Capacitor Shaded Pole Shaded Pole Shaft Dia. & Length 1⁄4 “ x 1-1⁄2” 5⁄16” x 3-1⁄4” Motor Dia. 3-3⁄8” 3-3⁄8” “A” Dim. 4-3⁄4” 2-3⁄4” Cross Reference JA1M069NV AA2P026N Notes Miller 326 HP 1/50 1⁄40 1⁄7 1⁄5 RPM 3000 3000 1050 1070 Speeds 1 1 1 1 Volts 115 115 115 115 335 Amps .77 .83 5.2 4.
O.E.M. – Direct Replacement Nordyne OML6435 ONR6406, ONR6026 9623 942 HP 1/8 RPM 1050 Speeds 1 Volts 115 Amps 6.0 Stock Number ONR6406 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length 1/2” x 3-7/8” Motor Dia. 5” “A” Dim. 3-5/8” 1/5 1050 1 115 6.5 ONR6026 CCWLE Shaded Pole 1/2” x 3-3/4” 5” 4-1/8” 1/5 1/4 1/40 1050 1050 1500 1 1 1 115 115 115 6.6 6.2 .8 OML6435 942 9623 CCWLE CCWLE CWLE Shaded Pole 7.
O.E.M. – Direct Replacement PennVent 975, OPV400206 OPV343 OPV346 OPV747 OPV746 OPV748 HP 1⁄20 RPM 1045 Speeds 1 Volts 115 Amps 2.3 Stock Number 975 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length 3⁄8” x 2-1⁄4” Motor Dia. 5” 1/40 1/6 1/12 1/20 1/7 1/11 1/25 1/12 1050 1550 1300 1050 1500 1300 1050 1550/1300 1 115 115 1.1 2.1/ 1.9/ 1.4 OPV400206 OPV748 CCWLE CCWLE-CWSE Shaded Pole 115 2.5/ 2.1/ 1.6 OPV747 115 1.5/ 0.9 .027 1550/10500 115 .
O.E.M. – Direct Replacement Rheem-Ruud HP 1⁄50 1⁄50 1⁄50 1⁄20 1/15 1/8 1/8 1/8 ORM1008V1 577 ORM1008 673 RPM Speeds Volts 3000 1 115 3000 1 115 2975 1 115 3000/3450 1 230/460 3000/3450 1 230/460 1075 1 230 825 825 2 1 208-230 208-230 653 660 Amps 1.0 1.0 1.1 1.0/.51 1.0/.51 .73 Stock Number 577 673 9438 653 660 ORM1006 Rotation CWLE CCWLE CCWLE CWLE CCWLE CCWLE Capacitor Shaded Pole Shaded Pole Shaded Pole Shaded Pole Shaded Pole 5MFD/370V Shaft Dia.
Continued from previous page O.E.M. – Direct Replacement Rheem-Ruud ORM1016, ORM1026 ORM1016V1 OCA1016 ORM10206V1 ORM1028 HP 1⁄6 1/6 1/6 RPM 825 1075 1075 Speeds 1 1 1 Volts 208-230 208-230 208-230 Amps 1.0 .80-.95 .8-.9 Stock Number 629A OCA1016 ORM1016V1 1/5 1075 2 208-230 1.1 ORM1016 1⁄5 825 1 208-230 1.4-1.3 1/5 1075 1 208-230 1/4 1075 1 1/4 1075 1/4 825 795A 629A ORM1026L Capacitor 5MFD/370V 3MFD/370V 3MFD/370V Shaft Dia.
O.E.M. – Direct Replacement Continued from previous page Rheem-Ruud ORM1036 ORM1038, ORM1058 794A FD6000, FDL6001 ORM1036V1 435A, 436A ORM1056, ORM1076, ORM10563 ORM5458 796A FE6000 Amps 2.2 Stock Number ORM1036 Rotation REV Capacitor 7.5MFD/370V Shaft Dia. & Length 1/2” x 5-1/2” Motor Dia. 5-5/8” “A” Dim. 4-3/8” 208-230 1.5-1.8 ORM1036V1 CCWLE 5MFD/370V 1/2” x 3-1/4” 5-5/8” 4-3/8” 2 1 1 2 1 208-230 460 460 208-230 208-230 2.8 0.9 1.0 2.8-1.7 2.
O.E.M. – Direct Replacement RV Products ORV4537 ORV4538 HP 1/5 RPM 1650 Speeds 3 Volts 115 Amps 2.5 Stock Number ORV4540 Rotation CCWLE 1/4 1/4 1/3 1625 1625 1675 1 2 2 115 115 115 2.8 3.1 3.4 ORV4537 ORV4538 ORV4539 CWLE CWLE CWLE ORV4539 Shaft Dia. Capacitor & Length 5MFD/370V 4 x 1/2 x 2-1/2” 7.5MFD/370V5-1/2 x 1/2 x 5-1/4” 7.5MFD/370V5-3/4 x 1/2 x 5-3/4” 7.5MFD/370V7-1/8 x 1/2 x 3-1/2” ORV4540 Motor Dia. 5” “A” Dim. 3-7/8” 5” 5” 5” 3-5/8” 3-5/8” 3-7/8” Motor Dia.
O.E.M. – Direct Replacement Sterling Radiator 978 HP 1/20 RPM 1050 Speeds 1 Volts 115 Amps 1.7 Stock Number 978 Capacitor Shaded Pole Rotation CCWLE Shaft Dia. & Length 3/8” x 3” Motor Dia. 5” “A” Dim. 4-1/4” Cross Reference 7151-2951 D242 Notes Tecumseh OTC6001, OTC6004 9487 981 OTC1862, OTC1864 HP 1/20 RPM 1500 Speeds 1 Volts 230 Amps 1.1 Stock Number OTC6004 Rotation CCWSE Capacitor Shaded Pole Shaft Dia. & Length 5/16” x 2-1/2” Motor Dia. 5” “A” Dim.
O.E.M. – Direct Replacement Titus 9435V1A HP 1⁄2 RPM 1075 Speeds 1 Volts 277 Amps 2.8 Stock Number 9435V1A Rotation REV Capacitor 10MFD/370V Shaft Dia. & Length 1/2” x 4-1/2” Motor Dia. 5-5⁄8” “A” Dim. 5” Cross Reference Notes 5KCP39MG692S 79,110 Trane 774 775 954 HP RPM 1⁄50~1⁄100 3290 9608 641, 952 9447 372 373 Speeds 2 Volts 115 Amps 1.3-.47 Stock Number 773 Rotation CWLE Capacitor Shaded Pole Shaft Dia. & Length 1-1⁄4 x 5⁄16 x 1-1⁄8” Motor Dia. 3-3⁄8” “A” Dim.
O.E.M. – Direct Replacement Continued from previous page Trane OTR1036, OTR10206 OTR1004 OTR1028 955 945, 953 680A 492 OTR4513 642 9651 598 RPM 3400 Speeds 1 Volts 120 Amps 0.85 Stock Number 964 Rotation CCWLE 1⁄15~1⁄45 ~1⁄60 1100 3 115 .8-.5-.35 953 CWLE Included 10-3/4 x 1⁄2 x 10-7/8” 1⁄8~1⁄20 ~1⁄30 1500 3 115 1.2-.7-.4 945 CWLE Included 1⁄8 1⁄8 1⁄8 1/8 775 1550 1550 1550 3 1 1 1 115 230 230 208-240 1.5 1.9 1.1 .8-.
O.E.M. – Direct Replacement Triangle Engineering OTEB2054A HP 1/2 RPM 1725 Speeds 1 Volts 115 Amps 8.0 Stock Number OTEB2054A Rotation CWLE Capacitor Split Phase Shaft Dia. & Length 1/2” x 2-5/8” Motor Dia. 6-1/2” “A” Dim. 5-3/8” Cross Reference S56A19A97 S56A33A97 S56A62A97 OTE2054A Notes Tuttle and Bailey 394 HP 1⁄15 RPM 1050 Speeds 1 Volts 115 Amps 2.2 Stock Number 394 Rotation CWSE Capacitor Shaded Pole Shaft Dia. & Length 3⁄8” x 3” Motor Dia. 4-5⁄16” “A” Dim.
O.E.M. – Direct Replacement Weil McLain 658 HP 1⁄12 RPM 3170 Speeds 1 Volts 115 Amps 2.3 Stock Number 658 Rotation CCWLE Capacitor Shaded Pole Shaft Dia. & Length 5⁄16” x 1-3⁄4” Motor Dia. 3-3⁄8” “A” Dim. 4-7⁄8” Cross Reference JA1N074 Notes 36 “A” Dim. 3-3/8” 4-1/8” Cross Reference Notes White Westinghouse OWW4515 OWW4514 HP 1/4 1/3 RPM 1330 1450 Speeds 2 3 Volts 208-230 208-230 Amps 1.6 2.
O.E.M. – Direct Replacement Whalen Co. (300 CFM Blowers) 793 HP 1⁄15~1/20~1/40 1⁄20~1⁄35 RPM 1060 1050 Speeds 3 2 Volts 115 115 Amps 1.2-.9-.7 .94-.54 Stock Number 793 485 Rotation Capacitor REV 6MFD/370V REV 4MFD/370V Shaft Dia. & Length 1⁄2” x 2-5⁄16” 1⁄2” x 2-3⁄4” 485 Motor Dia. 4-5⁄16” 5” “A” Dim. 4-1/8” 31⁄4” Cross Reference Notes CE3FO25 & 004597 DA3D060 & 061 Whirlpool 597 HP 1⁄60~1⁄75 RPM 1550 Speeds 2 Volts 115 Amps .74-.
O.E.M. – Direct Replacement York 770 655 771 9525 9409 OYK1006, OYK1026, OYK1028 466 TE OYK6518 9526 OYK1056 OYK1056V1 Amps .49 .49 .7 .3 .36 Stock Number 770 771 9409 9525 9526 Rotation CWLE CWLE CWLE CWLE CWLE Capacitor Shaded Pole Shaded Pole Shaded Pole Included Included Shaft Dia. & Length BLOWER BLOWER 1⁄4” x 2-1⁄2” 1⁄4” x 2-1⁄2” 3/8” x 8-3/4” Motor Dia. 3-3⁄8” 3-3⁄8” 3-3⁄8” 3-3⁄8” 3-3/8” “A” Dim. 5-1⁄2” 3-1⁄4” 6-1⁄8” 7” 7-1/8” 208-230 .
Split Phase Resilient Base Motors Belt Drive and Blower Applications Features: • • • • Class B Insulation Continuous Duty Reversible 60 HZs 800 ARS2020L Applications: Centrifugal Pumps, Blowers, Fans HP 1/12 1/8 1/8 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/6 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 RPM 1140 1140 850 1725 1725 1725 1725 1725 1725 1725 1725 1140 1140 1140 1140 1140 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1140 1
Split Phase Resilient Base Motors Continued from previous page Belt Drive and Blower Applications Features: • Class B Insulation • Continuous Duty • Resilient Base • Reversible • 60 HZ Applications: Centrifugal Pumps, Blowers, Fans 807L HP RPM Volts Full Load Amps Service Factor Frame Stock Number Bearings 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 3450 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 172
Continued from previous page Split Phase Resilient Base Motors Belt Drive and Blower Applications Features: • • • • • Class B Insulation (except Note 43 = Class A Insulation) Continuous Duty Reversible Single Speed 60 Hz (Note 6 = 60/50 Hz) F678 GK2054 Applications: Centrifugal Pumps, Blowers, Fans Full Load Service Stock HP RPM Volts Amps Factor Frame Number Bearings 1/2 1725 115 8.0 1.25 48 GF2054 Sleeve 1/2 1725 115 8.1 1.25 56 GK2054 Sleeve 1/2 1725 115 7.0 1.25 56 F678 Sleeve 1/2 1725 115 7.0 1.
Split Phase Adjustable Ring Mount Motors Quick-Fit™ Motors Features: • • • • • • Auto Protection Class B Insulation Open Dripproof Reversible 60 HZ 40°C Ambient AR2024 Applications: Belt drive and blowers. HP 1/4 1/3 1/2 RPM 1725 1725 1725 Volts 115 115 115 Full Load Amps 5.4 6.0 8.0 Service Factor 1.35 1.35 1.25 Frame 48 48 48 Stock Number AR2024 AR2034 AR2054 Bearings Sleeve Ball Sleeve Base/ Mounting Resil. Rings Resil. Rings Resil. Rings Enclosure ODP ODP ODP “C” Dim. 9.5 10.6 11.
Split Phase Rigid Base Motors Features: • Continuous Duty • Reversible • 60 HZ F661 Applications: Centrifugal Pumps, Blowers, Fans HP 1/6 1/4 1/4 1/4 1/4 1/3 1/3 1/3 1/2 3/4 RPM 1725 1725 1725 1725 1725 1725 1725 1725 1725 1725 Volts 115 115 115 115 115 115 115 115 115 115 Full Load Amps 5.1 5.2 5.4 5.4 3.8 6.2 6.1 5.3 8.1 9.6 Service Factor 1.35 1.35 1.35 1.15 1.00 1.00 1.35 1.15 1.15 1.00 Notes: 26. Extended thru bolts, shaft end only 261. 56Z = 1/2” flat x 1-1/2” shaft, 3-1/2” shaft height 341.
Fan and Blower Motors • Single Phase Belted Drive Motors - Resilient Base - 1800/1200 RPM 2 Speed - 2-Winding Variable Torque Features: • Reversible • 40˚C Ambient • 60 Hz SGF2034V3 HP RPM Volts Full Load Amps 1/6~1/18 1/4~.07 1/4~.07 1/4~1/12 1/4~1/12 1/4~1/12 1/3~1/15 1/3~1/11 1/3~1/11 1/3~1/11 1/3~1/11 1/3~1/10 1/3~1/10 1/3~1/9 1/3~1/9 1/3~1/8 1/2~.14 1/2~.14 1/2~.14 1/2~.14 1/2~.
Fan and Blower Motors • Three Phase Belted Drive Motors - Resilient Base - 1800/1200 RPM 2 Speed - 2-Winding Variable Torque Features: • • • • Ball Bearing Dripproof Reversible Three Phase • • • • Keyed Shaft, 5/8” x 1-7/8” 5/8” Extended Thru Bolts 60 Hz 40˚C Ambient H655V1 HP RPM Speeds Volts Full Load Amps Service Factor Frame Stock Number Enclosure Insulation Class Overload Protector “C” Dim. 1/2~.22 1/2~.22 3/4~.33 3/4~.33 1.0~.44 1.0~.
48 & 56 Frame Split Phase Motors C-Face Ventilator Motors Features: • • • • • Ball Bearing Class B Insulation Reversible Split Phase No Base • • • • 5/8” Dia. Keyed Shaft 4, 6, 8 Pole 40˚C Ambient 60 Hz F270 Applications: Designed for use on commercial and industrial ventilation systems.
Capacitor Start Resilient Base Motors Features: • High Start Torque • Open Construction • Reversible • 2, 4 and 6 Pole • 40˚C Ambient • 60 Hz Applications: Compressors, pumps, conveyors, milking machines, blowers, fans HP 1/4 1/4 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/2 1/2 RPM 1725 1725 3450 3450 1725 1725 1725 1725 1725 1725/1425 1725 1725 1725 1140 3450 3450 Volts 115/230 115/230 115/208-230 115/208-230 115/230 115/230 115/230 115/230 115/230 115/230 115/208-230 115/208-230 115/208-230 115
Capacitor Start Resilient Base Motors Continued from previous page Features: • High Start Torque • 40˚C Ambient • Reversible • 60 Hz • 2, 4 and 6 Pole Applications: Compressors, pumps, conveyors, milking machines, blowers, fans HP 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/2 1 1/2 1 1/2 1 1/2 2 2 2 2 RPM 3450 3450 3450 3450 3450 3450 1725 1725 1725 1725 1725 1725 1725/1425 1725 1140 1075 3450 3450 3450 3450 3450 3450 1725/1425 1725/1425 1725 1725 1
Capacitor Start Rigid Base Motors Compressors - Pumps - Blowers - Conveyors - Industrial Duty Features: • • • • Capacitor Start High Start Torque Open Dripproof Reversible • Rigid Base • 40˚C Ambient • 60 Hz OB1024 C308 Applications: Compressors, pumps, conveyors, milking machines, blowers, fans ODP, RIGID BASE, SINGLE PHASE CAPACITOR START HP 1/4 1/4 1/4 1/4 1/3 1/3 1/3 1/3 1/3 1/3 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 RPM 1725 1725 1725 1140 1725 1725 1725/1425 1725 1725 1725 3
Capacitor Start Rigid Base Motors Continued from previous page Compressors - Pumps - Blowers - Conveyors - Industrial Duty Features: • • • • Capacitor Start High Start Torque Open Dripproof Reversible • Rigid Base • 40˚C Ambient • 60 Hz V304 Applications: Compressors, pumps, conveyors, milking machines, blowers, fans ODP, RIGID BASE, SINGLE PHASE CAPACITOR START HP RPM 1 3450 1 3450 1 1725/1425 1 1745 1 1725 1 1725 1 1725 1 1745 1725 1 1/2 1 1/2 1725 1745 1 1/2 1725 1 1/2 2 3450 2 3450 2 3450 2 3450 2
NEMA “C” Face • General Purpose Industrial Motors Single Phase - Capacitor Start - Dripproof - No Base & Rigid Base Keyed Shaft -- 1/4 thru 5 HP Features: • Ball Bearing • Class B Insulation • Reversible B753 • 40˚C Ambient • 60 Hz Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Century® NEMA “C” Face • General Purpose Industrial Motors Single Phase - Capacitor Start - Dripproof - Rigid Base 3600 RPM & 1800 RPM - Threaded Shaft - Non-Reversible 303 Stainless Steel Shaft - 1/4 thru 2 HP Features: B620 • Ball Bearing • Class B Insulation • CW Non-Reversible • 40˚C Ambient • 60 Hz Applications: Centrifugal pumps only HP 1/4 1/3 1/3 1/2 1/2 1/2 3/4 3/4 1 1 2 RPM 1725 3450 1725 3450 3450 1725 3450 1725 3450 1725 3450 Volts 115/230 115/230 115/230 115/230 115/230 115/230 230/115
Capacitor Start TEFC C-Face Motors Features: • • • • Ball Bearing Capacitor Start Continuous Duty Electrically Reversible • Keyed Shaft • 40˚C Ambient • 60 Hz EC1054AV1 Applications: C208 Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Capacitor Start TEFC Motors Features: • • • • Ball Bearing Capacitor Start Continuous Duty Electrically Reversible • Keyed Shaft • 40˚C Ambient • 60 Hz C823 Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Capacitor Start Enclosed Rigid Base Motors Industrial and Farm Duty Applications Features: • • • • Ball Bearing Capacitor Start Continuous Duty Energy Efficient $ • • • • Reversible Rigid Base 40˚C Ambient 60 Hz K100 Applications: Compressors, conveyors, machine tools, pumps, air conditioning. Special service motors: air circulating fans, evaporative coolers, home workshops.
Three Phase ODP Resilient Base Motors Pumps - Blowers - Conveyors - Industrial Duty Features: • Ball Bearing • Continuous Duty HP 1/3 1/3 1/3 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1 RPM 1725/1425 1725 1725 3450 1725 1725 1725 1725 1725 3450 3450 3450 1725 1725 1725 1725 1725 1725 1725 3450 3450 3450 3450 1725 1725 1725 1725 1725 1725 1725 1725 • 40˚C Ambient • 60 HZ Volts 200-230/460 200-230/460 208-230/460 460/200-230 208-230/460 460/200-230 460/200-230 5
Three Phase ODP Resilient Base Motors Continued from previous page Pumps - Blowers - Conveyors - Industrial Duty Features: • Ball Bearing • Continuous Duty • Open Dripproof • Single and Two-Speed • 40˚C Ambient • 60 HZ HP RPM Speeds Volts 1 1/2 3450 1 200-230/460 3450 1 460/200-230 1 1/2 1 1/2 3450 1 575 1725 1 200-230/460 1 1/2 1725 1 208-230/460 1 1/2 1 1/2 1725 1 208-230/460 1725 1 460/200-230 1 1/2 1 1/2 1725 1 575 1725 1 575 1 1/2 1725 1 575 1 1/2 1-1/2~.68 1745/1140 2 460 1-1/2~.
Three Phase Totally Enclosed Resilient Base Motors Pumps - Blowers - Conveyors - Industrial Duty Features: • Ball Bearing • Class B Insulation • Continuous Duty HP 1/4 1/4 1/3 1/2 1/2 3/4 RPM 1725/1425 1140 1725/1425 1725 1140 1725 • 40˚C Ambient • 60 HZ H1025A Volts 208-230/460 200-230/460 208-230/460 200-230/460 200-230/460 200-230/460 Full Load Amps 1.4-1.5/.75 1.3-1.2/.6 1.2-1.2/.6,1.4-1.4/.7 1.6-1.8/.9 2.1-2.0/1.0 2.3-2.4/1.2 Service Factor 1.00 1.15 1.00 1.15 1.15 1.
Three Phase TEFC NEMA “C” Face General Purpose Motors Three Phase - Squirrel Cage - No Base 3600 - 1800 & 1200 RPM - 1/4 thru 75 HP Features: • Ball Bearing • 40˚C Ambient • Keyed Shaft • 60 HZ • Reversible H751 Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor. Full Load HP RPM Volts Amps 1/4 1725 208-230/460 1.2-1.1/.55 1/3 3450 200-230/460 1.3-1.4/.7 1/3 1725/1425 200-230/460 1.3-1.2/.
Three Phase TEFC NEMA “C” Face General Purpose Motors Continued from previous page Three Phase - Squirrel Cage - No Base 3600 - 1800 & 1200 RPM - 1/4 thru 75 HP Features: • Ball Bearing • Keyed Shaft • Reversible • 40˚C Ambient • 60 HZ H803 Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Three Phase TEFC NEMA “C” Face General Purpose Motors Three Phase - Squirrel Cage - TEFC - Rigid Base and Removable Base 3600 - 1800 & 1200 RPM - 1/4 thru 75 HP Features: • Ball Bearing • 60 HZ • Reversible • 40˚C Ambient • Keyed Shaft • Inverter Duty Motors NEMA Design B H949 Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Three Phase TEFC NEMA “C” Face General Purpose Motors Continued from previous page Three Phase - Squirrel Cage - TEFC - Rigid Base 3600 - 1800 & 1200 RPM - 1/4 thru 75 HP Features: • Ball Bearing • Reversible • Class F Insulation • Keyed Shaft • 60 HZ • 40˚C Ambient • NEMA Design B TCF81005E Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Century® NEMA “C” Face • General Purpose Industrial Motors Squirrel Cage - Three Phase - Dripproof No Base, Rigid & Removable Base, 3600 - 1800 & 1200 RPM - 1/4 thru 20 HP Features: • Double Sealed Ball Bearing • Reversible • 60 HZ • 40˚C Ambient Applications: H285 Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor.
Century® NEMA “C” Face • General Purpose Industrial Motors Squirrel Cage - Three Phase - Dripproof No Base, Rigid & Removable Base, 3600 - 1800 & 1200 RPM - 1/4 thru 7 1/2 HP Features: • Double Sealed Ball Bearings • Reversible • 60 HZ • 40˚C Ambient H612 Applications: Designed for industrial and commercial pumps, speed reducers and other equipment that mounts directly on a NEMA “C” Face type motor. Not for outdoor use – Horizontal mount only.
Three Phase ODP Motors Features: • • • • • • Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Inverter Duty Motors NEMA Design B • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient. H204 Applications: Pumps, fans, compressors, conveyors.
Three Phase ODP Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Dripproof Squirrel Cage 40°C Ambient 60 Hz • NEMA Design B • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency $ • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient. E206 Applications: Pumps, fans, compressors, conveyors.
Three Phase ODP Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Energy Efficient $ Dripproof NEMA Design B Rigid Base • Squirrel Cage • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase ODP Motors Continued from previous page Features: • • • • • • • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • NEMA Design B, unless noted Ball Bearings Continuous Duty Dripproof Squirrel Cage Energy Efficient $ Rigid Base • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase Totally Enclosed Motors Features: • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base No Protector • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient. H505 Applications: Pumps, fans, compressors, conveyors.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base No Protector • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC except as noted • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base NEMA Design B No Protector • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base NEMA Design B • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base NEMA Design B • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base NEMA Design B • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • • * Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base NEMA Design B No Protector • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Three Phase TEFC Motors Continued from previous page Features: • • • • • Ball Bearings Continuous Duty Squirrel Cage Energy Efficient $ Rigid Base • Standard, EPAct CC001A (E-Plus® motors) and Premium (E-Plus® 3 motors) Efficiency • 40°C Ambient • 60 Hz • TEFC • E-Plus® Motors meet the requirements of the Energy Policy Act of 1992. E-Plus® 3 motors exceed the requirements of the Energy Policy Act of 1992. E+3(NP) is NEMA Premium Efficient.
Century® Industrial E-Plus®3 Nema Premium Severe Duty Motors Premium Efficient CC001A - Squirrel Cage - TEFC - Rigid Base Severe Duty Construction 3600 - 1800 & 1200 RPM - 1 thru 50 HP - Cast Iron Features: • • • • • • All Cast Iron Construction Automatic Drain/Breather Continuous Duty Corrosion Resistant Fan Fully Gasketed Conduit Box Energy Efficient $ HP RPM 1 1730 1 1140 1 1/2 3470 1 1/2 1730 1 1/2 1165 2 3475 2 1730 2 1165 3 3505 3 1745 3 1170 5 3505 5 1745 5 1170 7 1/2 3500 7 1/2 1750 7 1/2 1170
Continued from previous page Century® Industrial E-Plus®3 Nema Premium Severe Duty Motors Premium Efficient CC001A - Squirrel Cage - TEFC - Rigid Base Severe Duty Construction 3600 - 1800 & 1200 RPM - 1 thru 50 HP - Cast Iron Features: • • • • • • All Cast Iron Construction Automatic Drain/Breather Continuous Duty Corrosion Resistant Fan Fully Gasketed Conduit Box Energy Efficient $ HP RPM 20 3510 20 1760 20 1170 25 3520 25 1765 25 1175 30 3525 30 1765 30 1175 40 3530 40 1770 40 1180 50 3550 50 1770
Century® Multi-Speed • Three Phase Motors Dripproof - Rigid Base - Two Speed Variable Torque - 1/.25 thru 50/12.5 HP Features: • Ball Bearings • Service Factor 1.15 • 60 Hz • 40˚C Ambient M312 Applications: For two-speed, one and two winding, variable torque applications for speed control from one speed to another while under load. Blowers, fans, conveyors, mixing machines, centrifugal pumps. HP RPM Oper. HP Oper. HP High Spd.* Low Spd.* Volts 2-1-VT ·Two Speed · One Winding · 1~.25 1~.
Continued from previous page Century® Multi-Speed • Three Phase Motors Dripproof - Rigid Base - Two Speed Variable Torque - 1/.44 thru 30/13.3 HP Features: • Ball Bearings • Open Dripproof • Service Factor 1.15 • Rigid Base • 60 Hz • 40˚C Ambient M207 Applications: For two-speed, one and two winding, variable torque applications for speed control from one speed to another while under load. Blowers, fans, conveyors, mixing machines, centrifugal pumps. HP RPM Oper. HP Oper. HP High Spd.
Century® Multi-Speed • Three Phase Motors Dripproof - Rigid Base - Two Speed Variable Torque - 2~.5 thru 25~6.5 HP Features: • Ball Bearings • Open Dripproof • Rigid Base • 60 Hz • 40˚C Ambient • Service Factor 1.15 M314 Applications: For two-speed, one and two winding, variable torque applications for speed control from one speed to another while under load. Blowers, fans, conveyors, mixing machines, centrifugal pumps. Oper. HP Oper. HP HP RPM High Spd.* Low Spd.
Century® High Pressure Washer Motors Single Phase - Dripproof & Totally Enclosed Fan-Cooled Rigid Base – 3600 & 1800 RPM – 1.5 thru 6 HP Features: B861 • Double Sealed Ball Bearings • 60 Hz • 40˚C Ambient • Class B Insulation • Reversible • Service Factor 1.15 • Manual Overload Protector • Two Step Varnish Treatment – Rotor surface and bearing brackets coated with corrosion resistant primer. One dip and bake of Class B Varnish is applied to wound stator.
Century® Air Compressor OEM Special Replacement Motors OEM Special Replacements – Dripproof – Rigid Base – Single Phase Capacitor Start/Capacitor Run Features: B385 • Non-Reversible–Connected for CW Facing End Opposite Shaft • Energy Efficient $ • 40˚C Ambient • 60 HZ • Ball Bearings HP RPM Volts 2 SPL 3450 115/230 3 SPL 3450 115/230 5 SPL 3450 208-230 Full Load Amps 15.0/7.5 15.0/7.5 15.0 Service Factor Frame 1.00 56 1.00 56 1.
Century® Quad-Plus™ Motors Totally Enclosed Fan Cooled – Rigid/Removable Base – Keyed Shaft 3600, 1800 & 1200 RPM – 1/4 Thru 3 HP Features: • Double Sealed Ball Bearings • UL and CSA certified • 40˚C Ambient B888 Applications: Designed for industrial and commercial pumps, conveyors, speed reducers and other equipment that mounts directly on a NEMA “C” face type motor. F-1 assembly vertical shaft up or down.
Century® Farm Building Direct Drive Fan Motors Features: • Auto Protector • Class B Insulation • Direct Drive • Double Sealed Ball Bearings • Extended 10-32 Thru-bolts 3/4” Past Nut • Fully Gasketed • Service Factor 1.0 • Single Phase • 60 Hz • 40°C Ambient C783 Applications: RPM resilient base 1/4 1/4 1/4 1/3 1/3 1/2 1/2 1/2 1/2 1700 1100 1100 1725 1100 1700 1100 825 850 Full Load Amps Frame Stock Number 115/230 115/230 115 115/230 115/230 115/230 115/230 115/230 115/230 3.4/1.7 4.0/2.0 3.41 3.
Century® Cow Cooler Farm Motors Features: • Ball Bearings • Capacitor Start Capacitor Run • Class B Insulation • Low Starting Torque • Single Phase • 40°C Ambient • 60 Hz • Energy Efficient $ C594 Applications: Environments requiring air movement. HP RPM Volts Full Load Amps Service Factor Frame Stock Number Base/ Mounting Enclosure Overload Protector Rotation “C” Dim. Notes Single Speed 1 1 1⁄2 1725 1725 115/230 115/230 9.6/4.8 17.0/8.5 1.00 1.
Poultry Duty Motors Features: • Suitable for 208 Volts at 1.0 S.F. • 40°C Ambient • 60/50 Hz • Energy Efficient $ • Ball Bearings • Class B Insulation • High Starting Torque • Reversible PD1050AV1 HP RPM Volts 1/2 1725/1425 115/208-230 1 1725/1425 115/230 1 1725/1425 115/230 Full Load Amps 4.8/2.4 9.0/4.5 9.0/4.5 Service Factor Frame 1.30 56 1.30 56 1.
Century® Farm Duty Motors Single Phase – Capacitor Start – Totally-Enclosed Fan-Cooled Rigid Base and Rigid Base with C-Face – 1800 RPM – 1/3 thru 2 HP Features: • High Starting Torque • Rigid Base • 40°C Ambient • 60 Hz • Ball Bearings • Bearings Lubricated with Low Temperature Grease C312 Applications: Fans and blowers, feed lot conveyors, liquid manure spreaders, unloaders, compressors, storage bin conveyors.
Century® Farm-Rated Motors Extra High Torque Motors – Single & Three Phase – Totally-Enclosed Fan-Cooled Rigid Base and Rigid Base with C-Face – 1800 RPM – 1 thru 10 HP Features: • High Starting Torque • 40°C Ambient • 60 Hz • Rigid Base • Ball Bearings • Reversible • All Parts Corrosion Resistant • Removable Condensate Drain Plugs • Service Factor 1.0 K208 Applications: Designed for high starting torque loads (300-400% of full load torque).
Century® Centrifugal Fan Farm Motors Single & Three Phase – Dripproof Rigid Base – 1800 RPM – 5 thru 30 HP Features: • Ball Bearings • Service Factor 1.15 • 60 Hz E219 • 40°C Ambient Applications: Centrifugal fans and blowers, barn coolers, poultry house coolers, livestock and poultry house temperature control. HP RPM Volts Full Load Amps Frame Single Phase Capacitor Start Capacitor Run 5 7 1⁄2 10 1745 1750 1750 230 230/460 230/460 22.0 32.0/16.0 38.0/19.
Century® Crop Dryer Farm Motors Direct Drive Only – Single & Three Phase – Dripproof Air-Over and Totally Enclosed Air-Over – Rigid Base – 3600 & 1800 RPM 5-7 thru 10-14 HP Features: • Ball Bearings • 60 Hz • 50°C Ambient • Class F Insulation • Service Factor 1.0 • Winding Thermostats • Moisture Resistant • Rust-Resistant Rotor • Switchless Design • Copper Wire Wound • Shaft Drilled & Tapped in End • Long Leads R327 Applications: For tubeaxial and vaneaxial direct drive dryers.
Century® Auger Drive Motors Direct Drive – Capacitor Start – Single Phase & Three Phase Totally Enclosed Fan Cooled - No Base – 1800 RPM – 1/3 thru 1-1/2 HP Features: • New “N” Flange Bracket • High Starting Torque • Torque Switch and Governor • Service Factor 1.0 • Double Sealed Ball Bearing • 40°C Ambient • 60 Hz C332 Applications: Designed for direct drive poultry and swine auger feeding systems. HP RPM Volts Full Load Stock Amps Frame Number Base/ Mounting Enclosure Shaft Dia.
Century® Replacement Zero Milk Tank Farm Motors PMDC Motor – Totally Enclosed Non-Ventilated – 95 VDC 950 RPM – Intermittent-Duty – 1/2 thru 1 HP Features: D211 • Double Sealed Ball Bearings • Round Frame • Non-toxic, White Epoxy Paint, FDA Approved for Contact with Food • Shaft Seal • All Bracket to Frame Fits and Terminal Cover have Internal O-ring • Gasketed Brush Access Covers • 1/2” - 14 Tapped Conduit Hole • Stainless Steel Shaft, with or without O-ring Grooves on Shaft Applications: Improved desig
Premium Efficiency Two-Speed Pool and Spa Motor with Integrated Timer NEW! 2 A premium efficiency motor in the Centurion motor family.
Premium Efficiency Variable Speed Motor v NEW! Features: • • • • • • • Integrated Timer Interface On- and Off-Board Mountable Interface Timer Mode Manual Mode Freeze Protection Auxiliary Load Capacity Configurable Prime Settings THP RPM Volts • • • • • • • Noise Reduction Design Adjustable Contrast Power Factor Correction Factory Reset Battery Backup - Program Saver LCD Display with Backlight Ball Bearing Service Factor Full Load Amps • • • • • • • Stock Number Flange TEFC Rotation: CCWPE
Guardian Pool Motors • Single Speed EASY TO INSTALL – PROTECTS PUMP – IMPROVES POOL SAFETY Features: • • • • • • • Easy to install Auto-Reset Auto-Calibration Ball Bearing Economical 60 HZ Stainless Steel Shaft • • • • • • • Nerve Center (lighting sequence) 3/4 to 3 HP Single-Speed Single Phase Run/Restart/Rest/Bypass Mode Tamper-Resistant Housing Compatible with all flow rates USQG1152A Applications: Century® Guardian® motors comply with requirements for safety vacuum release systems in the Virginia G
Two Compartment NEMA C-Face Pool Filter Motors • Single Speed Features: • Auto Protector • Open Dripproof • Sealed Ball Bearings • “1081” Design • 304 Brg.
Two Compartment NEMA C-Face Pool Filter Motors • Single Speed Features: • Open Dripproof • Rotation: CCW Pump End • Auto Protector • Sealed Switch Design • “1081” Design • 304 Brg.
Century® C-Face Pool and Spa Pump Motors Permanent Split Capacitor – Switchless – Single Phase – Dripproof No Base – 3450 RPM 1/2 thru 4 HP Features: • Ball Bearings • Class B Insulation • 50°C Ambient • 304 Bearing Shaft End • 60 Hz • Rotation: CCW Pump End B126 Centurion® “1081” • Full Rate • High Service Factor • Aluminum NEMA “C” Brackets HP RPM Volts 1/2 1/2 3/4 3/4 1 1 1-1/2 1-1/2 2 2 2 2 3 3 4 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 3450 230/115 230/115 2
Century® C-Face Pool and Spa Pump Motors Permanent Split Capacitor – Switchless – Single Phase – Dripproof No Base – 3600 3600/1800 RPM 1/2 thru 3 HP Features: • Ball Bearings • Class B Insulation • 304 Bearing Shaft End • 60 Hz • Rotation: CCW Pump End • Energy Efficient $ B638 E-Plus® Energy Efficient “1081” • Centurion® Motor • Full Rate • Aluminum NEMA “C” Brackets • 50˚C Ambient HP RPM Volts 1/2 3/4 1 3450 3450 3450 1-1/2 3450 2 3450 3 3450 208-230/115 208-230/115 208-230
Century® C-Face Pool and Spa Pump Motors Permanent Split Capacitor – Switchless – Single Phase – Dripproof No Base – 3600 3600/1800 RPM 1/2 thru 3 HP Features: • Ball Bearings • Class B Insulation • 304 Bearing Shaft End • 60 Hz • Rotation: CCW Pump End • Energy Efficient $ B971 Two Speed “1081” • Full Rate • High Service Factor • 40°C Ambient HP RPM Volts Service Factor Amps Service Factor THP Frame Stock Number Overload Protector Shaft “C” Dimension Notes High Spee
Two Compartment Square Flange Pool Filter Motors Single Speed & Energy Efficient Used on many Sta-Rite, Red Jacket, Pac Fab and American Products.
Two Compartment Square Flange Pool Motors • Two Speed Used on many Sta-Rite, Red Jacket, and Sears Jet and Pool Pumps. Features: • All Copper Windings • Auto Protector - Single Phase • Open Dripproof • Rotation: CCW Pump End • Class B Insulation • 50°C Ambient • UL1081 • 60 Hz • 303 Stainless Steel Threaded Shaft • Energy Efficient Capacitor Start Low Speed, PSC High Speed SQS1072R SQS1152R Two-speed motors are shipped less hi/lo switch for remote operation.
Century® Pool and Spa Pump Motors Square Flange Permanent Split Capacitor – Switchless – Single Phase – Dripproof No Base – 3600 and 3600/1800 RPM 1/2 thru 3 HP Features: • Ball Bearings • 50°C Ambient • Rotation: CCW Pump End • $ Energy Efficient • 60 Hz • Class B Insulation • Stainless Steel Shafts Service Service HP RPM Volts Factor Amps Factor THP Frame Centurion® “1081” • Full Rate • High Service Factor 1⁄2 3450 230/115 5.4/10.8 1.95 0.98 56Y 3⁄4 3450 230/115 7.1/14.2 1.65 1.
Century® Pool and Spa Pump Motors Square Flange New from Century® – High Efficiency two-speed motors. New Centurion High Efficiency two-speed motors have PSC (Permanent Split Capacitor) high speeds and capacitor start/capacitor run low speeds.
Above Ground Swimming Pool & Spa Pump Motors Jetted Tub/Spa/Above Ground Swimming Pool Pump Motors – Split Phase, Capacitor Start & PSC Single-phase – Dripproof – Ball Bearing – Rigid Base & No Base – 3450 and 3450/1725 RPM – 1/2 thru 4 HP SP Features: • 12 & 3 O’clock Conduit Entries • Rotation: CCW Pump End • 3-1/2” Shaft Height • 40˚C Ambient • Class B Insulation • Through Bolt Mount • 48/56 Base Mounting • Four Thru Bolts on a 5.
Century® 56-Frame Two-Speed Replacement Spa Motors Dripproof – 60 HZ – Single Phase – Rigid Base – 6-1/2” Diameter – 3-1/2” Shaft Height Features: • PSC on High Speed • E-Plus New Centurion Design • Cap Start/Cap Run on Low Speed • 50˚C Ambient • 3/8-16 UNC-2A Threads Includes Slinger • Four Thru Bolts on a 5.812 Bolt Circle B236 Status HP-SPL* RPM Volts Amps (A)** Frame Stock Number Insul. Class “C” Dim. Replaces Waterway # Replaces OEM # Replaces Stock # Notes NEW! NEW! 1.0 ~ .
Sta-Rite Direct Replacement Spa Motors Features: • • • • Open Construction Threaded Shaft 1.0 Service Factor Rotation: CCW Pump End • • • • Rigid Base • Sealed Ball Bearings Through Bolt Mount • 50˚C Ambient $ Energy Efficient • Auto Protector 2-Speed (Capacitor Start Low Speed, PSC High Speed) SDS1102 Four Thru Bolts on a 5.146 Bolt CircleReplacement Motor for Dimension One, Hydroquip, GPM Industries, Hawkeye, Marquis and Master Spas HP RPM Volts Amps 1.0-.12 3450/1725 115 10.4/3.6 1.5-.
Above Ground Swimming Pool & Spa Pump Motors Jetted Tub/Spa/Above Ground Swimming Pool Pump Motors – Split Phase, Capacitor Start & PSC Single-phase – Dripproof – Ball Bearing – Rigid Base & No Base – 3450 and 3450/1725 RPM – 1/2 thru 4 HP SP Hoffinger Replacement (Doughboy/Lomart) • No Base HP RPM Volts Hz 1 3450 115 60 1 3450 115 60 Notes: Full Load Amps 10.0 9.0 Service Factor THP Frame 1.0 1.0 48Y 1.0 1.
Century® Purex Replacement Pump Motors Horizontal – Dripproof – No Base – 3450 and 3450/2850 RPM – 5 thru 20 HP R236 Features: Ball Bearings • 40°C Ambient • Service Factor 1.15 • Reversible • External Slinger Applications: Hydrotech (Purex) East Side “L” Series and “C” Series commercial pump.
Special Direct Replacement Pump Motors Important: Total horsepower (HP x service factor) of replacement motor must equal or exceed motor being replaced Features: • • • • Auto Protector CCWPE Rotation Ball Bearings 60 Hz • • • • Capacitor Start • High Service Factors Internally Mounted Capacitor • Sealed Switch Design Continuous Duty • 303 Stainless Steel Thrd.
Century® Hayward Northstar Replacement Pump Motors NEMA C-Face – Dripproof – No Base – 60 Hz – Energy Efficient Features: • Ball Bearings • 50˚C Ambient • 303 Stainless Steel Shaft • Class B Insulation • 60 Hz • Low Noise HP RPM Volts Full Rated Full Load Amps • Switchless • E-Coated Main Frame for Superior Corrosion Resistance • Cool Running for Longer Winding Life Service Factor THP Frame Stock Number Industry Number “C” Dim.
NEMA C-Face 3-Phase Pump Motors Features: • Ball Bearings • Continuous Duty • Open Dripproof • NEMA “56C” Mount • 40°C Ambient • 60 Hz • Internal Junction Box • Keyed and Stainless Steel Threaded Shafts T3052 NEMA C Face mounting bracket, and end frames are die-cast corrosion resistant aluminum, accurately machined for maximum concentricity, and minimum runout. Stator assemblies are press fitted into rolled steel main frames.
Century® Swimming Pool Pump Motors Squirrel Cage (Three Phase) – Dripproof – 3600/3000 RPM – 1/2 thru 3 HP Features: • Ball Bearings • Cast Iron NEMA “C” Bracket • 50/60 Hz • 40˚C Ambient • 303 Stainless Steel Shaft • Class A or B Insulation • Reversible (Three Phase) H281 60/50 Hz • Three Phase “1081” • Full Rate • High Service Factor HP RPM Volts 1⁄2 3450 208-230/460 1⁄2 3450 208-230/460 3⁄4 3450 208-230/460 3⁄4 3450 208-230/460 1 3450 208-230/460 1 3450 208-230/460 1-1⁄2 3450 208-230/460 1-1⁄2 34
NEMA-C Face Single Phase Jet Pump Motors Important: Total horsepower (HP x service factor) of replacement motor must equal or exceed motor being replaced Features: • • • • • Auto Protector • Continuous Duty • Ball Bearings • Sealed Switch Design • CCWPE & Reversible • 40˚C Ambient • Capacitor Start • 60 Hz • Internally Mounted Capacitor High Service Factors NEMA “56C” Mount “778” Design Carbon Keyed and 303 Stainless Steel Thrd.
Square Flange Single Phase Jet Pump Motors Important: Total horsepower (HP x service factor) of replacement motor must equal or exceed motor being replaced Features: • High Service Factors • Capacitor Start • “778” Design • Rotation-CCW Pump End • Internally Mounted Capacitor • 60 Hz • Continuous Duty • Sealed Switch Design • 50˚C Ambient • 303 Stainless Steel Thrd. Shafts WARNING: Not a suitable replacement for square flange swim pool pump motors.
Century® NEMA “C” Face Commercial Pump Motors Commercial Pump Motors – Three Phase – Squirrel Cage – Dripproof, TEFC & TENV No Base 3600 RPM – 1/3 thru 3 HP Features: Double Sealed Ball bearings • 60 Hz • 40°C Ambient Applications: Domestic, commercial and industrial water systems. May be mounted horizontally or vertically, open or enclosed, keyed or threaded shaft. Shaft end ball bearings locked in bracket takes all pump thrust.
Century® Close-Coupled Pump Motors Types JM, JP and TCZ – Three-Phase – Horizontal – Dripproof – Rigid Base – 3600 and 1800 RPM – 60 Hz – 1 thru 3 HP Features: • • • • Ball Bearings External Slinger 60 Hz 40°C Ambient • Oversized Locked Shaft End Bearing • Frame Suffix Letters TCZ Designate Century West Coast Pump Standard Motors • Frame Suffix Letters JM and JP Designate NEMA Standard Motors TCP81026 Applications: Commercial/industrial pump duty.
Century® Close-Coupled Pump Motors Continued from previous page Types JM, JP and TCZ – Three-Phase – Horizontal – Dripproof – Rigid Base 3600 and 1800 RPM – 60 Hz – 5 thru 25 HP Features: • • • • Ball Bearings External Slinger 60 Hz 40°C Ambient • Oversized Locked Shaft End Bearing • Frame Suffix Letters TCZ Designate Century West Coast Pump Standard Motors • Frame Suffix Letters JM and JP Designate NEMA Standard Motors TCP11005 Applications: Commercial/industrial pump duty.
Century® Industrial Close-Coupled Pump Motors Types JM, JP and TCZ – Three-Phase – Horizontal – TEFC – Rigid Base 3600 and 1800 RPM – 1 thru 7 1/2 HP Features: • • • • Ball Bearings External Slinger 60 Hz 40°C Ambient • Oversized, Locked Shaft End Bearing • Frame Suffix Letters JM and JP Designate NEMA Standard Motors • Frame Suffix TCZ Designates Century West Coast Pump Standard Motors TCP71001 Applications: Designed for the specific requirements of centrifugal pumps.
Century® Industrial Close-Coupled Pump Motors Types JM, JP and TCZ – Three-Phase – Horizontal – TEFC – Rigid Base 3600 and 1800 RPM – 10 thru 50 HP Features: • Ball Bearings • External Slinger • 60 Hz • 40°C Ambient • • • • NEMA Design B Oversized, Locked Shaft End Bearing Frame Suffix Letters JM and JP Designate NEMA Standard Motors Frame Suffix TCZ Designates Century West Coast Pump Standard Motors TCP11007 Applications: Designed for the specific requirements of centrifugal pumps.
Century® Close-Coupled Pump Motors Types JM, JP and TCZ – Single-Phase – Horizontal – Dripproof – Rigid Base 3600 and 1800 RPM – 1 thru 10 HP Features: • • • • Double Sealed Ball Bearings External Slinger Reversible 60 Hz • • • • 40°C Ambient Oversized, Locked Shaft End Bearing Frame Suffix Letters JM and JP Designate NEMA Standard Motors Frame Suffix TCZ Designates Century West Coast Pump Standard Motors P137 Applications: Designed for the specific requirements of centrifugal pumps.
Carbonator Pump Motors Features: • 48 Frame • Auto Protector • Split Phase • Mount 48Y • Class B Insulation • Special Shaft Full Load HP RPM Volts Amps 1/4 1725 115 4.4 1/4 1725/1425 115/230 4.0/2.0 1/4 1725/1425 115/230 4.0/2.0 1/4 1425/1725 208-240 2.7-3.3/2.3-2.5 1/3 1725 115 6.2 1/3 1725 115 6.2 1/3 1725 115 6.2 1/3 1725/1425 115/230 4.6/2.3 1/3 1725/1425 100-120/200-240 4.6/2.3 1/3 1725/1425 100-120/200-240 4.6/2.3 1/2 1725/1425 115/230 6.8/3.
Century® Belt Drive Elevator Motors Three Phase – Horizontal – Dripproof – Rigid Base – 1800 & 3600 RPM – 10 thru 60 HP Features: • 120 Starts Per Hour, 40°C Ambient • 80 Starts Per Hour 65°C Ambient • Wye-Delta Start HP RPM Volts 10 1750 200 10 1750 230/460 15 3480 230/460 15 1750 200 15 1750 230/460 20 3480 230/460 20 1740 200 20 1740 230/460 25 3525 230/460 25 1740 200 25 1740 230/460 30 3520 230/460 30 1750 200 30 1750 230/460 40 3520 230/460 40 1750 200 40 1750 230/460 50 1750 200 50 1750 2
Century® Submersible Elevator Motors Single Phase and Three Phase – Horizontal – Open Oil Cooled Rigid Base – 3600 RPM – 3 thru 30 HP Features: • 30 Min. Duty, 120 Starts Per Hour in 40˚C Oil • Wye-Delta Start on Three Phase Only • 60 Hz • 80 Starts Per Hour in 80˚C Oil, 30% Time On • 120˚C Thermostat Tied to Winding with Leads Brought Out Single Phase • Permanent Split Capacitor HP RPM Volts 3 3450 208-230 5 3450 208-230 7 1/2 3450 208-230 10 3470 208-230 Full Load Amps 20.0-16.4 23.4-21.0 32.6-30.
Century® Industrial Inverter-Duty Motors Three Phase – TENV & TEFC – Rigid Base – 1800 & 1200 RPM – 1/4 thru 5 HP Features: • • • • • Ball Bearing • 60 Hz • NEMA Design B Reversible • Energy Efficient TENV is suitable for constant torque operation from 6-60 Hz TEFC is suitable for constant torque operation from 15-60 Hz or variable torque from 10-60 Hz Meets NEMA MG-31 Inverter duty performance specifications E180 Applications: Especially designed for use with adjustable speed controls using IGBT technol
Century® Industrial PMDC Washdown Motors PMDC Washdown Motor – 90 and 180 Volts – 1725 RPM – TEFC – 1/4 thru 1 HP Removable Rigid Base Features: • • • • • • Double Sealed Ball Bearings USDA Approved Epoxy Primer and Paint Stainless Steel Shaft and Drain Plugs Treated Interior Surfaces Continuous Duty SCR Rated • • • • • Skewed Armature for Smooth, Quiet Operation Shaft Seals Gasketed Construction 40˚C Ambient UL/CSA/CE Approved D208 Applications: Designed for washdown applications in agriculture, marin
Century® Industrial DC Elevator Door Motors Features: • Class B or F Insulation • 40˚C Ambient • Ball Bearings Arm. HP RPM Voltage (VDC) Amps Frame Montgomery Elevator–DN Shunt Wound 1⁄4 1200 230 1.16 56 1⁄3 3500 115/230 2.75/.109 56 1⁄2 1140 230 2.25 56C G.A.L. Door Opener–DN Shunt Wound 1⁄6 1150 230 .80 56 Moline/Montgomery Permanent Magnet 1⁄6 1140 24 7.5 Adams Elevator–Permanent Magnet 1⁄6 1140 230 .80 Schindler Elevator–Permanent Magnet 1⁄6 1150 170 1.
Century® V-Pak PMDC Adjustable Speed Packages Integral PMDC Motor with Plug-In & Run Speed Control – 115V or 230V Single Phase AC Input – Full Torque at 90:1 Speed Range – TEFC – C-Face Removable Base – Class H Insulation – 1725 RPM – 1/4 thru 1 HP Features: • 40˚C Ambient • Continuous Duty • Skewed Armature for Smooth, Quiet Operation D303 Applications: Blowers, Mixers, Conveyors, Fans, Packaging Equipment, Power Transmission, Pumps.
Century® Industrial Permanent Magnet Direct Current Motors For Rectified Power – Totally Enclosed Non-Ventilated & Totally Enclosed Fan-Cooled No Base & Rigid Base – 2500, 1750 & 1725 RPM 20:1 Speed Range at Constant Torque – 1/8 thru 3 HP Features: • 40˚C Ambient • SCR Rated • Continuous Duty • UL Class H Insulation File #E46316 • CE Approved • UL Recognized Construction File #55476 • CSA Certified File #LR39033 • Skewed armature for smooth quiet operation D016 If bolt is removed, bolt holes must be p
Century® Industrial DC T-Pak Motor Tachometer Packages 9505 Integral PMDC Motor with On-Board 50V/1000 RPM Tachometer for Closed Loop Motor Speed Control Systems – TEFC – Removable Base – 1725 & 1750 RPM – UL Class F Insulation – Capable of 100:1 Speed Range – 1/4 thru 3 HP Features: • Ball Bearings • UL and CSA Approvable • 40°C Ambient • SCR Rated Current Current HP RPM Armature Field Volts 90 Volt Armature • Permanent Magnet Field 1/4 1725 90 1/3 1725 90 1/2 1725 90 3/4 1725 90 180 Volt Armature
MSC 700™ DC Motor Adjustable Speed Controls Introducing the industry’s most innovative DC motor speed controls. MSC 700 controls from Century®. The fact is, no other speed control even comes close. Because no other control offers as much convenience, as much quality or as much affordability. Convenience and control all in one compact unit. Whatever your application, count on our MSC 700 units for all the control you need. The way they work is simple.
MSC 700™ DC Motor Adjustable Speed Controls & Options Chassis Units/Specifications Dual Voltage and Tachometer or Armature Feedback 115V, 1 HP (W706) • 1/4 -1/2 HP output, 115 VAC input • 3/4-1 HP output, 115 VAC with optional heat sinks (W727, W728 or W729) • 50:1 speed range • MAX, MIN, IR, CL and ACCEL trimpots • 1 % speed regulation (typical) • Armature feedback circuitry • MOV for transient protection • UL-(E143780) and CSA- listed • Approx. 3.64” x 4.30” x 1.
MSC 700™ DC Motor Adjustable Speed Controls Dimensions 1.88 TYP W706 W713 W770 MCS700 Stock Numbers Rated Load HP Torque (in.lbs.) 1 ⁄8 4.5 1 ⁄6 6 1 ⁄4 9 1 ⁄3 12 1 ⁄2 18 3 ⁄4 27 1 36 1-1⁄2 54 Notes: AC Input line Amps, Single Phase, 50/60 Hz Chassis Enclosed W706 W713 115 VAC 115 VAC 4.1 5.2 7.5 11.8+ 14.9+ 2.2 2.9 4.1 5.2 7.5 11.8+ 14.9+ 230 VAC 3.8 5.9 7.5 12.0+ 115 VAC 7.5 11.8 14.
Start/Run Capacitors These Motor Start Capacitors are Dry Electrolytic Nonpolarized Types for Intermittent Duty in AC motor starting circuits. Their round cases are of moisture and oil resistant molded Phenolic Resin or Plastic. Features: • Engineered Terminal Construction • Standard Dual Blade Terminals 110-125 VOLT AC 50/60 HZ Stock No.
Parts & Accessories Plastic Fan Blades Used with C-Frame Motors Stock No. Diameter Hub I.D. Type A Type B Type C For Shaft Size No. of Blades Rotation* Fan Type 626137 4.00” Round .187” or 3/16” 5 CW C 700027 4.19” Round .181” 5 CW C 700047 5.50” Round .187” or 3/16” 4 CCW B 700048 5.50” Round .218” or 7/32” 4 CCW B 700046 5.56” Round .187” or 3/16” 5 CCW C 700049 5.56” Round .218” or 7/32” 5 CCW C “D” Shaped .181” Impeller CW/CCW A 1010784-001 4.
Parts & Accessories Joggle Bolt Mounting Kit Stock No. 1414A Provides adjustable casebolt mounting patterns to fit RMR-Fedders (5 5⁄8” diameter motors only) and others. 1330A, 1383A, 2097A 1411A, 1412A Motor Rain Shields Stock No. 1330A Plastic 1⁄2” bore 6 3⁄4” dia 48 FRM Stock No. 1383A Plastic 5⁄8” bore 6 3⁄4” dia 48 FRM Stock No. 1411A Dished Plastic 1⁄2” bore 7” dia 48 FRM Stock No. 1412A Dished Plastic 5⁄8” bore 7” dia 48 FRM Stock No.
Parts & Accessories Rubber Cover Cap Bracket Assembly Capacitor Bracket & Cover Bracket For Use With The 3 3⁄8” Diameter Motors Stock No.1177A Complete with washers and grommets Rubber Grommets Stock No.1204A Stock No. 1365A Stock No. 1230A Stock No. 1482A Bracket Dim.: 2-1/8” x 1-1/4” Cover Dim.: 1-5/8” Adapter Plate For 33⁄8” Motors Shaft Extension Assembly Stock No. 1295A Coupling comes complete with set screws. Use anywhere an extension is desired.
Parts & Accessories Base for 4 5⁄16”, 5”, 5 5⁄8” Diameter Motors Refer to Stock Numbers 1181A and 1182A. For mounting rings and mounting clips. Requires 21⁄2” dia. ring. For use on Universal Electric® brand motors. Base HT.”D” Part # 2.25” 613156-003 1 Per Pack For Ring O.D. 2.50” “A” Lengths 45⁄16” DIA. Base Stock No.
Parts & Accessories Field Attachable Conduit Box Stock No. Box Size 1216A 1217A 1256A 1257A 1296A Explosion Proof Conduit Box Motor Frame 8 cu. in. 3.5 cu. in. 3.5 cu. in. 8 cu. in. 3.5 cu. in. H (5 5⁄8” Dia.) C (4 5⁄16” Dia.) J (3 3⁄8” Dia.) D (5” Dia.) D (5” Dia.) For motors with conduit connector holes only! Universal design motors only. ⁄8” Conduit Connector Part No.
Parts & Accessories Adapt-A-Lug Kits (Patent No. 3,903,443) Lug Mounting Bracket Stock No. 1327A ⁄ ” Slot Stock No. 1328A 3⁄4” Slot Stock No. ® 14 Save installation time. Fits directly to the case on Adapt-A-Lug® models. Both kits provide for bolt circles from 6 7⁄8” - 8 1⁄8”. 1379A 1380A 1377A 1378A 1320A 1366A 1223A 1364A 2094A* Motor Dia. 3 3⁄8” 3 3⁄8” 4 1⁄4” 4 1⁄4” 5” 5” 5 5⁄8” 5 5⁄8” 5 5⁄8” Min. B. C. D. 4 5⁄8” 5 7⁄8” 5 1⁄2” 6 3⁄4” 6 5⁄16” 7 9⁄16” 6 7⁄8” 8 1⁄8” 6 3⁄8” Max. B. C. D.
Parts & Accessories Base kits, capacitors, lug kits, length adapters, and other accessories may be used to modify and convert standard products for special applications. Designed for quick installation, these accessories allow increased flexibility with minimum stock. 48 TO 56 FRAME ADAPTER FLEXIMOUNT ADAPTER Adapter converts 5-1/2” diameter Century Fan Motors to 6-1/2” diameter. The adapter can be easily mounted on standard, offthe-shelf Century 48 Frame (5-1/2”) Fan and Blower Motors.
Parts & Accessories Century II Replacement Part Listing for 140-320 Frame TEFC Cast Iron Terminal Box Kits Frame 140 180 210 250 280 320 Poles ALL ALL ALL ALL ALL ALL Kit # 1010223 1010224 1010225 1010226 1010227 1010228 Cast Iron Fan Cover Kits Frame 140 180 210 250 280 320 Poles ALL ALL ALL ALL ALL ALL Kit # 1010200 1010201 1010203 1010205 1010207 1010208 C-Flange Kits Frame 140 180 210 250 280 320 Poles 2-4-6 2-4-6 2-4-6 2-4-6 2-4-6 2-4-6 Kit # 1010246 1010247 1010248 1010249 1010250 1010251 242
Parts & Accessories DC Motor Thermal Protector Kit Part Number Suitable for PMDC motors over 15 pounds. Thermal Protector Kit not available for motors under 15 pounds. 891095 List Price (U.S. $) $10.00 Note: 1. Item to be discontinued when stock is depleted 891095 Shaft Adapter Kit A shaft adapter (sleeve and key) is available that will increase the shaft diameter from 1⁄2 inch to 5⁄8 inch.
Century® Rush Center Motor modifications in one to three days... If you need immediate motor modifications on 20 motors or less and want to avoid special engineering and manufacturing schedules, call your Century Customer Service Center. Your order will be confirmed and a delivery date established. Quoted lead days are modification time only. They are subject to part availability and large order quantities. Please specify desired delivery dates on all orders to insure timely delivery.
Century® Rush Center CR15 Convert to F2, Sidewall or Ceiling Mount – Three Phase Only Modification includes the disassembly of the motor and the conversion made to customer specifications. Due to varied construction, engineering approval may be required. Also includes the addition of appropriate condensation drain holes. NEMA Frame 140T 180T 210T 250T 280T List Price Per Motor (U.S. $) $ 161.70 161.70 161.70 161.70 242.55 NEMA List Price Per Frame 180T-Motor (U.S. $) 320T $ 242.55 360T 242.55 400T 323.
Century® Rush Center CR23 Tropicalization Modification includes the disassembly of the motor and the application of rust preventative primer to the rotor. The motor winding is given an extra spray of non-hygroscopic varnish. If screens are required for tropicalization, refer to CR20. Not applicable to Explosion Proof Motors. NEMA Frame 48-56T 140T 180T 210T 250T List Price Per Motor (U.S. $) $ 234.04 234.04 234.04 234.04 308.51 NEMA List Price Per Frame 180T-Motor (U.S. $) 280T $ 308.51 320T 308.
Mechanical Dimensions Features Dimensions Drip-proof, Totally Enclosed Fan Cooled and Explosion Proof. All dimensions are approximate, not to be used for construction purposes. Note: Drawing shows rigid base. Foot mounting dimensions listed are identical for either rigid or resilient base mounting. For 56H Combination Foot, refer to Diagram 1. For C Flange motors, refer to Diagram 2. 56H Combination Foot Common to All Squirrel Cage Motors 6.50 5.00 Ref.
General Purpose IHP Motor Dimensions Single and Three Phase 143T-449T Frame • Dripproof • Totally Enclosed • Explosion-Proof NEMA Frame 143T 145T 182T 184T 213T 215T 254T 256T 284T 284TS 286T 286TS 324T 324TS 326T 326TS 364T 364TS 365T 365TS 404T 404TS 405T 405TS 444T 444TS 445T 445TS 445TZ 447T 447TS 447TZ 449T 449TS 449TZ Keyway 3⁄16 x 3⁄32 3⁄16 x 3⁄32 1⁄4 x 1⁄8 1⁄4 x 1⁄8 5⁄16 x 5⁄32 5⁄16 x 5⁄32 3⁄8 x 3⁄16 3⁄8 x 3⁄16 1⁄2 x 1⁄4 3⁄8 x 3⁄16 1⁄2 x 1⁄4 3⁄8 x 3⁄16 1⁄2 x 1⁄4 1⁄2 x 1⁄4 1⁄2 x 1⁄4 1⁄2 x 1⁄4
NEMA Frame Assignments Open and TEFC 3600 RPM NEMA Frame Program Hp 1 1800 RPM “U” Frames 1952 “T” Frames 1964 1200 RPM 900 RPM Original NEMA Frames “T” Frames 1964 “U” Frames 1952 Original NEMA Frames “T” Frames 1964 “U” Frames 1952 Original NEMA Frames “T” Frames 1964 “U” Frames 1952 Original NEMA Frames — — — 143T 182 203 145T 184 204 182T 213 225 1 1/2 143T 182 203 145T 184 204 182T 184 224 184T 213 254 2 145T 184 204 145T 184 224 184T 213 225 213T
Century® Definite Purpose Motor Dimensions Close-Coupled Pump Motors • Type JM and Type JP NEMA Standard • West Coast Pump Type Century Standard For Reference Only Unless Approved for Construction 250 www.centuryelectricmotors.
Century® Industrial DC Motor Dimensions Dimensions & Ratings NEMA 42CZ Frame Configuration NEMA 42C Frame Configuration AG AG C C AG AG .5000 .4995 .5000 .4995 NEMA 48C Frame Configuration NEMA 56C Frame Configuration C C AG AG AG AG 5.000 4.99 HP 1⁄8 1/8 1⁄6 1/6 1⁄4 1/4 1/4 Full Load RPM .6250 .6245 Volts DC Enclosure NEMA Frame Full Load Amps Less Base Stock Number Rigid Base Stock Number AG Max D019 D036 – D020 – 6.00 7.00 7.50 7.75 8.
Century® Industrial DC Motor Dimensions HP 1⁄4 1⁄3 1⁄3 1⁄2 1⁄2 1⁄2 1⁄2 1⁄2 1⁄2 3⁄4 3⁄4 3⁄4 1 1 1 1 Full Load RPM Volts DC Enclosure 1725 1725 1725 1725 1725 1725 1725 2500 2500 1725 1725 2500 1725 1725 2500 2500 90 90 180 90 180 90 180 90 180 90 180 90 90 180 90 180 TENV TENV TENV TEFC TEFC TENV TENV TENV TENV TEFC TEFC TEFC TEFC TEFC TEFC TEFC NEMA Frame 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C 56C Full Load Amps 2.9 3.5 1.9 5.4 2.6 5.5 2.8 5.7 2.6 8.0 4.0 8.1 10.0 5.0 12.
Century® Industrial DC Motor Dimensions Dimensions & Ratings 6600 Series (D070, D071, D074, D075, D080, D081 and W200 motors only) 6600 Series (D072, D082, W201* and W202* motors only) 184T Base (*base and shaft dimensions W201 and W202) HP 1-1/2 1-1/2 2 2 2 3 3 3 Notes: 1 Full Load RPM Volts DC Enclosure 2500 1750 2500 1750 1750 1750 1750 1750 180 180 180 180 180 180 180 180 TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC NEMA Frame 143TC/145TC 143TC/145TC 143TC/145TC 143TC/145TC 143TCY/145TCY 143
Century® Industrial DC Motor Dimensions Direct Current – Wound Field Fractional Horsepower Motors Dimensions in Inches Type and Frame C DN-B56C DN-H56C DN-J56C DN-K56C DN-L56C DN-M56C` BS 10.82 11.19 11.69 12.57 13.44 14.34 BV 4.69 5.06 5.56 6.44 7.31 8.21 7.25 7.62 8.12 9.00 9.87 10.77 Direct Current – Wound Field Integral Horsepower Motors Dimensions in Inches Type and Frame A DN-184AC DN-185AC DN-187AC DN-189AC 8.60 8.60 8.60 8.60 B 10.70 11.40 12.70 15.70 BA 2.75 2.75 2.75 2.75 C 15.
Century® Industrial DC Motor Dimensions Zero Milk Tank Replacement Motors Version I Version II Stock No. D201 D202 D211 D212 Version II II I I Dimension L 11.89 13.88 11.88 13.88 Notes: Motor leads: red and black #16 AWG, 105°C or better Shaft endplay: with 10 lbs. thrust in either direction, shaft movement shall not exceed .002” www.centuryelectricmotors.
Index STOCK NUMBER 02 0427 0547A 5BK3072 5FC1066 5FC1106 5FC3076 5FC3106 5FE1036S 5FE1054S 5FE1056S 5FE1076S 5OCA1056 5OCA3056 7DB6408 7DB6503 7DB6504 7FD1016 7FD1024S 7FD1026 7FD1036 7FD1056 7FD6000A 7FD6001A 7FSE1026 7FSE1056 7RA1016 7RA1026 7RA1036 7RAB4010 10 11 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 29 30 31 32 33 36 38 40 41 42 43 44 46 48 256 PRICE $216.00 $339.00 $367.00 $446.00 $426.00 $725.00 $822.00 $651.00 $236.00 $354.00 $279.00 $330.00 $483.00 $511.00 $184.00 $301.00 $340.00 $222.
Index STOCK NUMBER 314 320 322 323 323A 324 326 332 335 341 342 345 345A 346 347 348 348A 349 350 351 356 357 359 360 362 363 364 369 370 371 372 373 374 377 378 379 380 381 382 382A 383 385 389 389A 390 391 393 393A 394 396 398 399A 400 407 408 414 415 418 419 420 429 PRICE $127.00 $211.00 $227.00 $231.00 $231.00 $142.00 $185.00 $281.00 $193.00 $357.00 $188.00 $163.00 $163.00 $208.00 $269.00 $332.00 $345.00 $182.00 $166.00 $194.00 $162.00 $195.00 $127.00 $298.00 $280.00 $292.00 $247.00 $208.00 $96.
Index STOCK NUMBER 584 585 591 593 594A 595 596 597 598 599 604 606 608 609 610 611 612A 613A 614 615 616 621 629A 632 633 634 636 637 638 639A 640 641 642 643 645A 647A 648A 653 655 656 657 658 660 661A 665A 666A 667 668A 669 670 670A 671B 672B 673 674 680A 683 684 686 688 689 258 PRICE $293.00 $293.00 $232.00 $305.00 $346.00 $311.00 $301.00 $147.00 $205.00 $357.00 $215.00 $231.00 $244.00 $244.00 $217.00 $217.00 $228.00 $228.00 $230.00 $230.00 $73.00 $179.00 $219.00 $80.00 $114.00 $113.00 $76.
Index STOCK NUMBER 927AL 927L 939L 941L 942 945 948 949 950 951 952 953 954 955 959 960 961 964 965 975 978 979 980 981 982 983 985 986 988 989 990 991 992A 993 994 995 997 998 999 3325CCW 3325CW 9200 9207F2 9208F2 9209H 9209L 9210H 9210L 9211 9212 9213 9214H 9214L 9215H 9215L 9216H 9216L 9336 9400 9401 9403 PRICE $421.00 $428.00 $408.00 $421.00 $215.00 $325.00 $140.00 $139.00 $244.00 $119.00 $315.00 $321.00 $315.00 $334.00 $363.00 $363.00 $276.00 $208.00 $380.00 $243.00 $334.00 $109.00 $144.00 $275.
Index STOCK NUMBER 9523 9525 9526 9600A 9605A 9608 9614 9615 9616 9617 9618A 9619 9620 9621 9622 9623 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635A 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 260 PRICE $170.00 $450.00 $436.00 $437.00 $456.00 $321.00 $256.00 $217.00 $246.00 $236.00 $331.00 $377.00 $367.00 $375.00 $393.00 $173.00 $236.00 $236.00 $171.00 $171.00 $178.
Index STOCK NUMBER ARB2034L1 ARB2034L2 ARB2034L3 ARB2034L4 ARB2034L5 ARB2034L6 ARB2034M ARB2034SV1 ARB2036S ARB2036SL ARB2054L1 ARB2054L2 ARB2054L3 ARB2054L4 ARS2020L ARS2050DV1 B116 B120 B121 B122 B123 B124 B125 B126 B127 B128 B129 B130 B131 B171 B172 B176 B177 B177L B178 B179 B180 B182 B183 B220 B221 B222 B236 B237 B238 B381 B382 B383 B384 B385 B386 B387 B412 B416 B417 B418 B420 B472 B513 B519 B582 PRICE $350.00 $312.00 $343.00 $330.00 $343.00 $321.00 $352.00 $344.00 $375.00 $362.00 $393.00 $390.
Index STOCK NUMBER B799 B808 B809 B813 B817 B818 B835 B836 B837 B845 B849 B855 B860 B861 B867 B868 B869 B870 B871 B888 B889 B890 B891 B892 B966 B966T B969 B970 B971 B972 B973 B974 B976 B977 B978 B985 B1000 B2232 B2233 B2234 B2235 B2242 B227SE B228SE B229SE B230SE B231SE B2661 B2748 B2840 B2841 B2841V1 B2842 B2843 B2844 B2846 B2847 B2848 B2852 B2853 B2854 262 PRICE $523.00 $596.00 $605.00 $721.00 $695.00 $704.00 $491.00 $520.00 $897.00 $312.00 $439.00 $439.00 $725.00 $790.00 $886.00 $1,010.00 $615.
Index STOCK NUMBER BK3054V1 BK3074 BK3102 BK3202L BL6407 BL6408 BL6409 BL6410 BL6411 BL6412 BL6413 BL6414 BL6416 BL6419 BL6420 BL6423 BL6424 BL6425 BL6505 BL6505V1 BL6519 BL6519V1 BL6530 BL6531 BL6532 BL6533 BL6534 BL6541 BLR6401 BLR6402 BLR6403 BLR6404 BLR6405 BLR6406 BLR6407 BLR640S BN23V1 BN24V1 BN25V1 BN34V1 BN35SS BN35V1 BN36 BN37V1 BN40SS BN50V1 BN51 BN61 BN62 BN63 BR052000 BR0675 BR3202L BV35V1 BV90 BV91 C024 C026 C027 C031 C032A PRICE $456.00 $503.00 $487.00 $602.00 $186.00 $176.00 $170.
Index STOCK NUMBER C109L C150L C151L C153L C155 C157L C187 C196L C198L C199 C202 C208 C209 C210 C213 C215 C218 C220 C222 C223 C224 C225 C226 C231 C233 C235 C238 C239 C240 C241 C242 C243 C244 C245 C246 C247 C248 C249 C250 C308 C309 C310 C310C C311 C311C C312 C312C C313 C313C C314 C314C C315 C316 C317V1 C319 C320 C322 C323 C324 C325 C330 264 PRICE $389.00 $408.00 $426.00 $410.00 $447.00 $371.00 $463.00 $379.00 $403.00 $379.00 $556.00 $508.00 $648.00 $883.00 $976.00 $931.00 $820.00 $430.00 $369.00 $435.
Index STOCK NUMBER C594 C595 C596 C597 C598 C607 C608 C612 C613 C620 C621 C630 C634 C635 C639 C645 C654 C655 C658 C660V1 C661V1 C662 C663 C664 C665 C666 C669 C671 C678V1 C682 C683 C685 C686 C688 C689 C690 C691 C692 C693 C695 C720A C721A C722A C723A C723V1A C724A C741V1 C742V1 C766 C770 C770V1 C771 C774 C775 C776 C777 C782 C782RB C783 C784 C785 PRICE $475.00 $771.00 $693.00 $693.00 $771.00 $396.00 $389.00 $478.00 $515.00 $663.00 $641.00 $418.00 $393.00 $496.00 $474.00 $369.00 $465.00 $476.00 $488.
Index STOCK NUMBER PRICE WT. PAGE D030 D031 D032 D033 D034 D035 D036 D038 D039 D040 D041 D042 D043 D044 D052 D053 D054 D055 D059 D060 D061 D062 D066 D068 D070 D071 D072 D073 D074 D075 D076 D080 D081 D082 D090 D092 D201 D202 D203 D204 D205 D206 D207 D208 D209 D210 D211 D212 D303 D306 D307 D308 D312 D552 D708 D710 D711 D712 D750 D751 D752 $733.00 $774.00 $808.00 $873.00 $1,058.00 $1,273.00 $562.00 $693.00 $756.00 $798.00 $830.00 $894.00 $1,081.00 $1,294.00 $808.00 $774.00 $1,058.00 $1,273.00 $925.
Index STOCK NUMBER DSB1016R DSB1024 DSB1024H DSB1026 DSB1026H DSB1034H DSB1036H DSB1056H E104L E118E E124 E125 E125L E127 E157E E159E E172E E175 E179 E180 E180L E181L E182 E182L E183L E185 E186 E187 E202M E203M E204 E205 E206 E207V1 E216V1 E217V1 E218 E219 E237 E297 E302M E303 E316 E317 E325 E331 E368E E369E E371ME E372ME E374E E375E E377E E378E E392 E393 E394 E395 E397 E407 E450 PRICE $383.00 $313.00 $320.00 $295.00 $301.00 $304.00 $332.00 $370.00 $493.00 $563.00 $530.00 $562.00 $562.00 $530.00 $452.
Index STOCK NUMBER F262 F263 F264 F265 F266 F267 F268 F269 F270 F271 F273 F274 F276 F340 F341 F344V1 F352 F352V1 F353 F387 F390 F391 F392 F393 F393L F394 F395 F396L F500L F501 F502 F505 F661 F670 F670A F671 F674 F675 F678 F680 F681 F683 F684 F1018S F1026 F1026S F1028S F1036 F1036S F1038 F1056 F1056S F1058 F1076 F1076A F1076S F1076SV1 F1106 FB1056 FB1056TE FB1076 268 PRICE $528.00 $660.00 $694.00 $694.00 $570.00 $591.00 $797.00 $1,025.00 $382.00 $425.00 $547.00 $916.00 $957.00 $494.00 $604.00 $286.
Index STOCK NUMBER FE6002F FE6003F FE6004F FEH001 FEH1026SF FEH1028S FEH1036SF FEH1056D FEH1056S FEH1056SF FEH1076 FEH1076D FEH1076SF FH1024 FH1036 FH1038 FH1054 FH1056 FH1056S FH1076 FL1038 FM1026 FM1036 FM1056 FM1076 FML1026 FML1036 FML1056 FML1076V1 FR1076 FR1106 FS1016 FS1018 FS1024S FS1026 FS1026S FS1028 FS1036 FS1036S FS1037S FS1038 FS1056 FS1056S FS1076S FSE1008SF FSE1016 FSE1016SF FSE1016SV1 FSE1018SF FSE1024 FSE1026 FSE1026SF FSE1026SV1 FSE1028SF FSE1036 FSE1036SF FSE1036SV1 FSE1038SF FSE1054 FSE10
Index STOCK NUMBER H193 H194 H195 H196 H197 H198 H201A H204 H205 H238 H247 H248 H249 H251 H254 H256L H257 H257L H258L H259 H261A H262L H262V2 H263L H264A H267 H268 H271 H273L H274V1 H275V2 H276 H276L H279 H280 H281 H282 H283 H284 H285 H286 H288 H298 H299 H358 H358L H377 H379A H428 H429 H437 H438 H446 H448 H449 H450 H451 H461L H464 H467 H468 270 PRICE $414.00 $468.00 $575.00 $682.00 $783.00 $298.00 $357.00 $515.00 $533.00 $339.00 $308.00 $321.00 $634.00 $298.00 $275.00 $511.00 $557.00 $557.00 $519.
Index STOCK NUMBER H685 H686 H688L H696 H697 H698 H699 H703L H704 H705 H706 H707 H710 H710L H711 H712 H713 H714 H717V1 H718V1 H733 H734 H736 H738 H740 H741 H742 H743 H751 H753 H755 H756 H757 H767 H768 H803 H840 H841V1 H842V1 H843V1 H844 H845 H847 H850L H851V2 H852L H853V2 H854L H855L H868L H869L H880L H881 H882L H883L H884L H885L H886L H887L H921L H930L PRICE $809.00 $752.00 $437.00 $718.00 $777.00 $841.00 $615.00 $679.00 $575.00 $586.00 $706.00 $829.00 $636.00 $636.00 $579.00 $612.00 $736.00 $783.
Index STOCK NUMBER H1003 H1004 H1005 H1006 H1007 H1008L H1009 H1010 H1011L H1012 H1013 H1014L H1015 H1016L H1017 H1022 H1022V1 H1025A H1026 H1027A H1028 H1029 H1030L H1031 H1031L H1032 H1032L H1034V1 H1035L H1038E H1039L H1040 H1041L H1042L H1043 H1043L H1044 H1044L H1045 H1045L H1046 H1046L H1047L H1048L H1049 H1049V1 H1050A H1050RB H1051A H1051RB H1052A H1052RB H1053A H1053RB H1054A H1054RB H1055A H1056A HSQ1052 HSQ1072 HSQ1102 272 PRICE $595.00 $361.00 $508.00 $648.00 $428.00 $552.00 $669.00 $476.
Index STOCK NUMBER K305 K307 K310 K311 K312 K313 K314 K315 K321 K320 K327 K1030 K1032 K1024LD K1034LV1 K1050 K1052 K1070 K1072 K1100 K1102 K1150 K1152 K1200 K1202 K3072 K3102 K3152 K3202 M104 M104V1 M109V1 M116V1 M120V1 M125V1 M126 M126V1 M127V1 M128L M206 M207 M208 M210 M211 M220 M221 M222 M223 M302 M305 M312 M313 M314 M315 M316 M317 M320 M321 M322 M412 M413 PRICE $1,558.00 $1,898.00 $1,275.00 $1,558.00 $1,912.00 $1,912.00 $2,326.00 $2,852.00 $1,692.00 $1,463.00 $1,956.00 $201.00 $201.00 $351.
Index STOCK NUMBER OCA3076 OCA3076H OCA6427 OCA10086 OCA10106 OCA10206A OCA10208 OCB1026A OCB1036A OCB1056 OCB4036SP OCB6427 OCC1056 OCD1056 OCE1036 OCF1036 OCP0108 OCP0250 OCP0251 OCP1024 OCT1026S ODN1036A OEK4509 OEK4510 OEV1006 OEV1026 OEV6016 OFC1004 OFC1024 OFE1016 OFE1034 OFE4536 OFE5001 OFR1016 OFR1036 OGD1016 OGD1026 OHQ1056 OHR1106 OHS1004 OHS1016 OHS10206 OHS9983 OKA1052 OKA1072 OKB1038 OKB1058 OKR1096 OKR1503 OKT1026 OKT3035 OKT3041 OL1032D OL1052DS OL1072D OL2002 OL2032 OL2034 OL2052D OLE1026 OL
Index STOCK NUMBER PRICE WT. OS2050 OS2074 OSR1026 OTA2004 OTC1862 OTC1864 OTC6001 OTC6004 OTEB2054A OTR1004 OTR1028 OTR1036 OTR4513 OTR10206 OTY1024 OWR1016 OWR1036 OWW4514 OWW4515 OWW4517 OWW6516 OYK1006 OYK1026 OYK1028 OYK1056 OYK1056S OYK1056V1 OYK1106 OYK6518 P121 P122 P123 P124 P126 P128 P130 P131 P133 P137 P140 P212 P228 P229 P230 P231 P232 P235 P311 P312 P313 P317 P318 P319 P320 P321 P324 P325 P326 P327 PD1050AV1 PD6104AV2 $218.00 $232.00 $346.00 $186.00 $264.00 $282.00 $172.00 $165.
Index STOCK NUMBER R451 R452 R453 R550 R551 R552 R553 R612 R613 R615 R1052 R1072 R1072ES R1102 R1102ES R1152ES R1202ES RA1006 RA1016 RA1024 RA1026 RA1034 RA1036 RA1036WB RA1054 RA1056 RA1056WB RA1074 RA1076 RA1176WB RAB1034S RAB1036 RAL1006 RAL1016 RAL1024 RAL1026 RAL1034 RAL1036 RAL1054 RAL1056 RAL1076 RAL10156 RB1052L RB1054AV1 RB1074A RB1104AV1 RB1154AV1 RB1204AV1 RB2014 RB2024 RB2026 RB2026L RB2034 RB2034L RB2036 RB2054DV2 RB2054DV3 RB3034A RB3104A RB3154A RB3154AV1 276 PRICE $2,424.00 $2,693.
Index STOCK NUMBER PRICE WT.
Index STOCK NUMBER PRICE WT. T57014 T57015 T57016 T57017 T57018 T57019 T57026 T57027 T57028 T57029 T57030 T57031 T57032 T57033 T57034 T57035 T57036 T57037 T57038 T57039 T57040 T57041 T57042 T57043 T57044 T57051 T57052 T57053 T57054 T57055 T57056 T57057 T57058 T57059 T57060 T57061 T57062 T57063 T57064 T57065 T57066 T57067 T57068 T57069 T59002 T59003 T59004 T59005 T59006 T59007 T59008 T59009 T59010 T59011 T59012 T59013 T59026 T59027 T59028 T59029 T59030 $7,666.00 $9,771.00 $13,016.00 $16,715.
Index STOCK NUMBER PRICE WT. PAGE STOCK NUMBER PRICE WT.
Index STOCK NUMBER PRICE WT.
Index STOCK NUMBER UB09CWHA2F UB09CWL UB09CWL2F UB09CWLA UB09CWLA2F UB16CCHV1 UB16CCHV12F UB16CCLA UB16CCLV1 UB16CCLV12F UB16CWHA UB16CWHV1 UB16CWHV12F UB16CWLA UB16CWLV1 UB16CWLV12F UB023CWLA UB025CWL UCT1072 UCT1102 UCT1152 UH1016 UH1016NB UH1016NBV1 UH1016V1 UH1026 UH1026NB UH1026V1 UH1036 UH1036NB UH1036V1 UHH1026 UHH1036 UHH1036NB UQC1072 UQC1102 UQC1152 UQS1102R UQS1152R UQS1202R US1016 US1016NB US1026 US1026NB US1036 US1036NB USN1102 USN1152 USN1202 USN1252 USN1302 USQ1052 USQ1072 USQ1102 USQ1152 USQ
Index- Parts & Accessories STOCK NO. PRICE 260B913H01 $1.00 1177A $17.00 1180A $20.00 1181A $10.00 1182A $10.00 1183A $10.00 1202A $24.00 1204A $10.00 1205 $4.00 1205 $43.00 1207 $47.00 1209 $28.00 1211 $30.00 1212 $29.00 1216A $27.00 1217A $26.00 1218A $22.00 1219A $16.00 1220A $14.00 1221A $12.00 1223A $30.00 1226 $29.00 1229 $23.00 1230A $17.00 1231A $29.00 1233A $105.00 1234A $165.00 1236A $35.00 1254A $13.00 1255A $17.00 1256A $25.00 1257A $27.00 1263A $26.00 1264A $6.00 1292 $29.00 1293 $28.
Index- Parts & Accessories STOCK NO.
Terms & Conditions Century Distributor Terms and Conditions 1) Prices are those in effect at time of shipment. Prices are subject to change without notice. 2) A minimum charge of $25.00 will apply to any parts order which is less than $25.00. 3) Freight Policy: Stock Motors a) All shipments are F.O.B. shipping point. b) On single release orders for 35 or more motors (or 1,200 pounds) Century ships prepaid to the first destination within the continental U.S.
MOTOR SELECTION HELP PLEASE COMPLETE ALL INFORMATION Customer_____________________________ Motor Manufacturer_____________________ Phone_ ______________________________ Motor Model No._______________________ Fax__________________________________ MOTOR APPLICATION Pump Air Moving: Belt or Direct Drive General Purpose Other: MECHANICAL Frame Size: SHAFT Shaft: Single or Double Shaft Dia.
Statement of Warranty Policy Warranty Period DISCLAIMER OF IMPLIED WARRANTIES All Century® motors are warranted against defects in materials and workmanship for a period of twelve (12) months from the date of installation or twenty-four months (24) from the date of manufacture, whichever comes first except for E-Plus®3 Integral Horsepower Motors and HeatMaster® Condenser Fan Motors which are warranted for twenty-four months (24) from date of installation and thirty-six (36) months from date of manufacture
New! Fan Canopy More New Models THE EVOLUTION CONTINUES... Our high ambient, class F insulation line now includes eleven new commercial condenser fan canopy motors, seven singlephase and four three-phase models. • Our expanded line is built with UL and CSA recognized Class F insulation for 70°C (158°F) ambient conditions providing longer motor life in commercial applications. • Ultra-high-torque designs mean the HeatMaster motors work in even the toughest applications.
“Century’s Modern Math” 2 + REPLACES 1 HUNDREDS Three MultiFit® motor models, 1625 RPM and 1075 RPM, replace 1/4, 1/5, 1/6, 1/8, 1/10 and 1/12 horsepower CW and CCW rotation motors with one simple connection. The MultiFit motor is designed to replace all the common condenser fan 42-frame (5” dia. ) and clam-shell motors found in the HVAC market. Look What Our Customers Are Saying “Such a well engineered and thought out product. Makes for a one-stop service call.
Formerly A. O. Smith Electrical Products Company A Regal Brand Formerly A. O. Smith Electrical Products Company Our product brand name has changed. V-Green Variable speed ECM design with integrated user interface A. O. Smith Distribution Motors will now carry the Century brand name.
CENTURY® ELECTRIC MOTORS CATALOG • 1100 • 2012-2013 Stock Motor Catalog 1100 Formerly A. O. Smith Electrical Products Company 6200 Dixie Road, Unit 1 Missisauga, Ontario, L5T 2E1 PH: (905) 670-3380 FAX: (905) 670-7637 centuryelectricmotors.
