User`s manual

�POWER ON
�
�
�
�
�
�
●
●
25％ finiah
Do not turn off the power when in progress!
Warning!
3.Press the button to start!(①)
Press PC/COPY button for 3 seconds, LED will turn from blue to red（②）
Blue
Turn to red
Long press for 3 seconds
4.Press START button to start copy operation.
When in copy operation,HDD1/HDD2 light will be pink flash, and the Progress Status LED
will be blue flash from left to right,25% a unit to indicate the finished copy status.
Once finished, the Progress Status LED will be blue light and the bar is at 100%, and
the HDD1/HDD2 will change from pink to blue light.
※Please turn off the power after copy operation finished.
Begin!
Finish!
Press START button
HDD1/HDD2 LED- Pink flash
Progress Status LED- Blue flash
Copy Progress
when copying, blue flash next 25%
HDD1/HDD2 LED- Pink flash to Blue light
Progress Status LED- Blue light, status bar at 100%
※Please turn off the power after copy operation finished.
◎The copy operation time required differs from different HDD.
～Reference～
In our testing, 500GB HDD requires 150 mins, average transfer rate up to 55MB/sec.