Instruction Manual www.centuryproducts.
TABLE OF CONTENTS ❃ Before You Begin Important Information.......................................1 Warnings...........................................................2 Basic Information...............................................4 What is LATCH?.................................................5 LATCH System..................................................6 ❃ Use Height and Weight Limits..................................7 Installation with harness system and Vehicle Seat Belt...........................
IMPORTANT INFORMATION NO CAR SEAT CAN GUARANTEE PROTECTION FROM INJURY IN EVERY SITUATION. HOWEVER, PROPER USE OF THIS CAR SEAT REDUCES THE RISK OF SERIOUS INJURY OR DEATH TO YOUR CHILD. READ THIS MANUAL CAREFULLY. ❃ Registration Information Child restraints (car seats) could be recalled for safety reasons. You must register this restraint to be reached in the event of a recall.
WARNINGS - Prevent serious injury or death: Failure to follow these instructions and car seat labels can result in child striking the vehicle’s interior during a sudden stop or accident. Secure child restraint with a vehicle seat belt or LATCH as shown in this manual. Not all vehicle seat belts can be used with car seat.
WARNINGS - Prevent serious injury or death (continued): DO NOT use car seat if it is damaged or has missing parts. DO NOT use accessories or parts other than those provided by Century or Graco. Their use could alter the function of the car seat. Never leave child unattended, even when sleeping. If using vehicle seat belt to secure car seat, LATCH connectors must be stored.
BASIC INFORMATION ❃ Certification ❃ Unoccupied Car Seat With Harness System: Car seat meets or exceeds all applicable requirements of Federal Motor Vehicle Safety Standard 213 for use in motor vehicles and aircraft. Without Harness System: Belt-Positioning Booster seat is certified for use in motor vehicles. Belt-Positioning Booster seat is NOT certified for use in aircraft. ❃ Car Seat Useful Life STOP using car seat and throw it away after the date molded into the underside of the car seat.
WHAT IS LATCH? United States Federal Motor Vehicle Safety Standards have defined a new system for installing car seats in vehicles. The system is called LATCH. LATCH stands for: Lower Anchorage and Tether for CH ildren. Typical seat in a passenger vehicle. Other vehicle types may have different LATCH locations. Vehicle Top Tether Anchor Points LATCH System for Vehicles: LATCH in the vehicle consists of a top tether anchor point and two lower anchor points.
LATCH SYSTEM LATCH System: LATCH consists of a permanently attached lower anchorage belt and a top tether strap (Fig. a). Car Seat Top Tether Vehicle ONLY use LATCH in a seating Top Tether position recommended Anchor Point by vehicle manufacturer. Vehicle Lower Anchor Points (Fig.
HEIGHT and WEIGHT LIMITS ❃ With Harness System ❃ Outgrowing Car Seat Child MUST meet all of the following requirements: • Weight is 20 - 40 lbs (9 - 18 kg). • Height is 27 - 43 inches (69 - 110 cm) tall. . • Child is able to sit upright unassisted • Child’s shoulders are below top harness slots. * WARNING To avoid injuries from whiplash, top of child’s ears must be below top edge of headrest. With Harness System 30 lbs 20 lbs 40 lbs (9 kg) (13.
INSTALLATION - with harness system and Vehicle Seat Belt 1 Adjust car seat to upright or semi-upright position and armrests to up position. 2 Place forward-facing on vehicle seat. 3 Lift seat pad flap (on certain models), thread vehicle seat belt through openings and buckle belt (fig. a). 4 Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt. Use your knee to press down in center of car seat (fig. b).
INSTALLATION -without harness system and Vehicle Lap/Shoulder Belt 1 Adjust car seat to upright or semi-upright position and armrests to up or down position. 2 Place forward-facing on vehicle seating position with a vehicle lap/shoulder belt. To use as a BELT-POSITIONING BOOSTER, the following items need to be removed: Crotch Strap - (see page 19, fig. g and fig. h) Harness System - (see page 20) LATCH BELT - (see page 30) Tether - (see page 31) Store all items for future use.
INSTALLATION - with harness system and LATCH 1 Place forward-facing on vehicle seat. 2 Lift seat pad flap (on certain models), check to make sure LATCH belt is properly routed through openings and attach LATCH belt to lower anchorage points (fig. a). 3 Press down firmly in center of car seat to compress vehicle seat cushion while tightening LATCH belt. Use your knee to press down in center of car seat (fig. b). 4 Pull front to back and left to right to check for secure installation (fig. c).
INSTALLATION - with harness system and LATCH Opening (fig. b) (fig. a) Pull to tighten (A) (B) (fig. c) (fig.
PLACING CHILD IN CAR SEAT - with harness system Adjust harness system: WARNING Harness straps must be through slots at or just above shoulders. To prevent serious injury or death: • Vehicle seat belt must be routed through back of car seat when using harness system. 1 Place child in car seat with child’s back flat against back of car seat. • Never place vehicle belt in front of child when using harness system. 2 Place harness straps over child’s shoulders and lock tongues into buckle.
PLACING CHILD IN CAR SEAT - with harness system (continued) 3 2 Head Support (on certain models) (fig. a) (fig. b) (fig.
PLACING CHILD IN CAR SEAT - without harness system Remove harness system (see “Harness System removal and re-assembly” section, page 20). WARNING To prevent serious injury or death: • Use ONLY the vehicles Lap/Shoulder Belt system when restraining the child in this booster seat. 1 Place child in car seat with child’s back flat against back of car seat. 2 Place shoulder belt across child’s chest.
PLACING CHILD IN CAR SEAT -without harness system (continued) Head Support (on certain models) Loops (fig. a) (fig. b) (fig. c) (fig.
OPERATIONS and ADJUSTMENTS 1 Harness Straps (fig. a): 4 • Recline: Slide tab on front of car seat to allow recline foot to drop down. • To tighten: Pull lower belt tab. • To loosen: Pull upper belt tab while pulling harness straps. 2 • To open: Press tab and pull apart (fig. b). Buckle: • To lock: Insert both tongues into buckle. Pull up on tongues to be sure they are locked. • To unlock: Press red button and pull tongues out of buckle.
OPERATIONS and ADJUSTMENTS (continued) Loosen Upper Belt Tighten Lower Belt Adjuster (fig. a) (fig. e) (fig. b) (fig. c) (fig.
OPERATIONS and ADJUSTMENTS 7 Changing Harness Strap Slots: MUST use slots at or just above shoulders. A Loosen harness straps. B Remove both harness strap loops from Splitter Plate on back of car seat (fig. f). C Change harness strap slots. Make sure harness straps are threaded through matching slot of seat pad and car seat. It may be necessary to remove seat pad from top of car seat. D Put right strap loop on Splitter Plate first, then attach left strap loop. (fig. f).
OPERATIONS and ADJUSTMENTS 8 (continued) Changing Crotch Strap Slots: MUST be in slot closest to but not under child. A Turn car seat upside down, pry metal rod loose using screwdriver and pull rod out of crotch strap end (fig. g). B Turn car seat upright and pull crotch strap and buckle out. C Change crotch strap slots. Thread looped end of crotch strap through slots in seat pad and shell (fig. h). D Slide metal rod through loop in crotch strap and press rod into car seat shell (fig. i).
HARNESS SYSTEM - removal and re-assembly Harness Removal: 2 • Remove harness strap loops from Splitter Plates on back of car seat. Put right strap loop on Splitter Plate first, then attach left strap loop. • Pull harness strap out of car seat, harness tie and tongues. Store all parts for future use. • Remove crotch strap (see page 19). When re-assembling harness system, be sure harness straps are not twisted.
HARNESS SYSTEM - removal and re-assembly (continued) 1 3 2 Splitter Plate (Back) 21
VEHICLE SEAT BELTS WARNING Not all vehicle seat belts can be used with a car seat: • Car seat with harness system MUST be held securely at all times by a lap belt (or lap belt portion of a lap/shoulder belt) that will not change length while driving. • Car seat without harness system MUST be used with a lap/shoulder belt. To provide the most secure installation of the car seat: • Read the vehicle owner’s manual regarding car seat installation and seat belt use with car seat.
VEHICLE SEAT BELTS (continued) ❃ Lap Belts - Manually Adjustable With Harness System: The locking latch plate on some seat belts may slip and loosen after being buckled on car seat if positioned at a certain angle. If this happens, flip latch plate over (fig. a) and re-buckle. Test installation again to see if this works. If not, move car seat to another seating position. Flip Without Harness System: DO NOT use this type of vehicle seat belt to secure child and booster car seat. (fig.
VEHICLE SEAT BELTS (continued) ❃ Lap Belts - With Retractor With Harness System: Lap belts with retractors may or may not hold a car seat securely. Follow these steps to determine if you have a retractor system that will hold car seat securely: a. Pull belt all the way out. b. Allow belt to retract about 6 inches (15 cm). c. Pull out on belt again. If belt is locked and you cannot pull the belt out any further, you have an Automatic Locking Retractor which may be used with a car seat.
VEHICLE SEAT BELTS (continued) ❃ Passive Restraint - Lap Belt with Motorized Shoulder Belt With or Without Harness System: DO NOT use with any car seat. ❃ Passive Restraint - Lap or Shoulder Belt Mounted on Door With or Without Harness System: DO NOT use with any car seat. Belts will not stay tight while driving.
VEHICLE SEAT BELTS (continued) ❃ Belts Forward of Seat Crease Seat Crease With Harness System: Vehicle seat belts located forward of seat crease may not securely hold car seat. Check vehicle owner’s manual or see vehicle dealer for car seat installation requirements. If approved for use with car seat by vehicle manufacturer, install car seat and check for secure installation by pulling car seat front to back. If car seat slides forward, DO NOT use these seat belts. Without Harness System: OK to use.
VEHICLE SEAT BELTS (continued) ❃ Combination Lap/Shoulder Belt with Locking Latch Plate With Harness System: Flip OK to use. Follow vehicle owner’s manual for specific instructions on how to use vehicle seat belts. The locking latch plate on some seat belts may slip and loosen after being buckled on car seat if positioned at a certain angle. If this happens, flip the latch plate over (fig. b) and re-buckle. Test installation again to see if this works.
VEHICLE SEAT BELTS (continued) ❃ Combination Lap/Shoulder Belt with Sliding Latch Plate With Harness System: Pull Pull on latch plate (fig. a). If belt slides freely through latch plate, a locking clip MUST be used. (See “Locking Clip”section, page 29.) Without Harness System: This vehicle seat belt system is OK to use with booster car seat.
VEHICLE SEAT BELTS (continued) ❃ Locking Clip WARNING Avoid serious injury or death: • Failure to use locking clip where required will result in car seat not being securely held in place. • Remove locking clip from seat belts when not being used with car seat. • DO NOT use locking clip as a vehicle seat belt shortener. You MUST use locking clip provided with car seat with a vehicle seat belt that slides freely through the latch plate or the lap belt cannot be tightly secured.
ADDITIONAL INFORMATION ❃ LATCH Storage ALWAYS STORE LATCH WHEN NOT IN USE. • Locate LATCH storage loops on the underside of car seat pad (fig. a). • Fasten LATCH onto storage loops as shown (fig. b) Repeat for other connector. ❃ LATCH Removal (fig. a) (fig. b) REMOVE LATCH FOR BELT-POSITIONING BOOSTER • Locate LATCH belt UNDER seat pad. • Unscrew fastener holding LATCH belt in place. (fig. c) Store for future use. 30 (fig.
ADDITIONAL INFORMATION (continued) ❃ Tether Storage Tether strap may be used with car seats when used as a belt positioning booster (without harness) to help keep the upper portion of the car seat stabilized. Read and follow instruction manual for use of car seat as a belt positioning booster. For storage of tether hook if not used with a belt positioning booster: • Adjust tether strap length so hook end is as short as possible. • Roll up loose end of strap.
ADDITIONAL INFORMATION (continued) ❃ Cup holder A cupholder has been provided with this carseat. For maintenance, follow care and cleaning instructions for seat pad and armrest pads.
ADDITIONAL INFORMATION (continued) ❃ Care & Cleaning Removing Seat Pads: If using harness system, remove harness system (see Harness System - removing and re-assembly” section, page 20). 1 Slide “J” hooks out of front slots. 2 Unhook elastic from “J” hooks. 3 Pull two button clips out (located on inside of seat pad) and pull pad off. 3 4 1 2 2 Removing Armrest Pads and Top Head Pad (available on some models): 4 Pull head pad attachment strips apart and pull pads off.
ADDITIONAL INFORMATION Seat Pad and Armrest Pads: Machine-wash separately on gentle cycle and drip dry. Harness Straps: Surface wash only with mild soap and damp cloth. If harness straps are frayed or heavily soiled, they MUST be replaced. Shell: Wipe with mild solution of soap and water. Avoid wetting labels. Never use household detergents, they can weaken plastic. Buckle: Rinse buckle with warm water. DO NOT use household detergents. Never lubricate buckle.
NOTES 35
PARTS LIST How to Order: Complete the form on the following page. Your car seat model and serial numbers MUST be included on the form to ensure proper replacement parts. Your model number can be found on a sticker on the underside of your car seat. Payment must accompany your order. Parts may also be ordered from Century’s web site at www.centuryproducts.com. Fabric Seat Pad with Comfort Clips ® ......................$35.00 Armrest Pads (2) ....................................................$10.
Model No. (Both Numbers Required) SHIP TO: Name Serial No. Check or money order enclosed (payable to Century Products) Charge to credit card Visa MasterCard Discover Address Account # City, State, Zip Code Telephone (including Area Code) Expiration date Signature Subtotal: E-mail Address Fabric Seat Pad with Comfort Clips® ......................$35.00 Shipping & handling*: $5.00 Armrest Pads (2) ......................................................$10.00 Sales tax**: Shield with Harness Straps..
1 Fold instruction manual. If a part is damaged, missing, or you need help or replacement parts, DO NOT return car seat to the store. CALL US FIRST Call toll-free 1-800-837-4044 from anywhere in the U.S. or Canada or fax at 1-610-884-8370. 2 Store in pocket. or write us at: Century Products 150 Oaklands Blvd. Exton, PA 19341 Attention: Customer Service Department Pocket Century Products Graco Children’s Products Inc.
Manual de instrucciones www.centuryproducts.
ÍNDICE DE MATERIAS ❃ Preliminar Información importante.....................................1 Advertencias......................................................2 Información básica............................................4 ¿Qué es el sistema LATCH?............................... 5 Sistema LATCH ............................................... 6 ❃ Utilización Limites de peso y altura.....................................7 Instalación con el sistema del arnés y cinturón del vehículo de regazo y hombro......
INFORMACIÓN IMPORTANTE NINGÚN ASIENTO DE SEGURIDAD PARA AUTOMÓVIL PUEDE GARANTIZAR LA PROTECCIÓN CONTRA LESIONES EN TODAS LAS SITUACIONES. SIN EMBARGO, EL USO CORRECTO DE ESTE ASIENTO DE SEGURIDAD PARA AUTOMÓVIL REDUCE EL RIESGO DE QUE SU NIÑO SUFRA LESIONES SERIAS O LA MUERTE. LEA ESTE MANUAL CON ATENCION. ❃ Información sobre el registro Los asientos de seguridad para niños (asientos para automóviles) se pueden retirar del mercado por razones de seguridad.
ADVERTENCIA - Prevenga lesiones graves o la muerte: El incumplimiento de estas instrucciones y las etiquetas del asiento podría causar el choque del niño contra el interior del vehículo durante una parada repentina o un accidente. Asegure el asiento de seguridad para automóvil con un cinturón de seguridad del vehículo o sistema LATCH como se indica en este manual. No todos los cinturones de seguridad de todos los vehículos se pueden utilizar con los asientos de seguridad.
ADVERTENCIA- Prevenga lesiones graves o la muerte (cont.): Se debe reemplazar el asiento de seguridad para automóvil tras haber sido sometido a un accidente. ¡NO lo use de nuevo! Un accidente podría causar daños ocultos y su utilización repetida podría causar lesiones graves o la muerte. Si usa el cinturón de seguridad del vehículo para sujetar el asiento de seguridad para automóvil, debe almacenar los conectores del sistema LATCH. (Consulte la sección "Almacenaje del sistema LATCH".
INFORMACIÓN BÁSICA ❃ Certificación ❃ Asiento de seguridad para automóvil desocupado Con el sistema del arnés: Este asiento de seguridad para automóvil cumple o excede todos los requisitos requeridos por la Norma Federal 213 de Seguridad de Automóviles para uso en automóviles y aeronaves. Sin el sistema del arnés: Esta asiento para niños ha sido certificada para ser usada en vehículos automotor. Esta asiento para niños NO ha sido certificada para ser usada en aeronaves.
¿QUÉ ES EL SISTEMA LATCH? Las Normas Federales para Seguridad de Automóvilesde Estados Unidos han determinado un nuevo sistema de instalación de asientos de seguridad en los vehículos. Este sistema se denomina LATCH, que son las siglas en inglés de: Un asiento típico de un vehículo de pasajeros. Otros tipos de vehículos disponen de otras ubicaciones del sistema LATCH.
SISTEMA LATCH Sistema LATCH: El sistema LATCH consta de un cinturón de anclaje inferior permanente y una correa de anclaje superior. (Fig. a). Utilice el sistema LATCH ÚNICAMENTE en la posición del asiento recomendado por el fabricante del vehículo. Anclaje superior del asiento de seguridad Punto de anclaje superior del vehículo Puntos de anclaje inferiores del vehículo (Fig.
LIMITES DE PESO Y ALTURA ❃ Con el sistema del arnés El niño DEBE cumplir todos los siguientes requisitos: • Peso de 20 a 40 libras (9 a 18 kg) • Altura de 27 a 43 pulgadas (69 a 110 cm) • El niño debe poderse sentar en posición vertical sin ayuda . • Los hombros del niño están debajo de las ranuras superiores del arnés.
INSTALACIÓN - con el sistema del arnés y cinturón del vehículo 1 Ajuste el asiento de seguridad para automóvil en la posición semi-vertical o vertical y los apoyabrazos en la posición hacia arriba. 2 Colóquelo orientado hacia delante en el asiento del vehículo. Levante la lengüeta de la almohadilla del asiento (en ciertos modelos), pase el cinturón de seguridad del vehículo a través de las aberturas y trabe la hebilla (fig. a).
INSTALACIÓN - sin el sistema del arnés y cinturón del vehículo de regazo y hombro 1 Ajuste el asiento de seguridad para automóvil en la posición semi-vertical o vertical y los apoyabrazos en la posición hacia arriba o abajo. 2 Colóquelo orientado hacia delante en el asiento del vehículo con el cinturón del vehículo de regazo y hombro. Para usar el asiento para niños como apoyo de posición del cinturón, las piezas siguientes debe estar rearmado: Correa de la entrepierna - (Vea la página 19, fig. g y fig.
INSTALACIÓN - con el sistema del arnés y sistema LATCH 1 Colóquelo orientado hacia delante en el asiento del vehículo. 2 Levante la lengüeta de la almohadilla del asiento (en ciertos modelos) y verifique para asegurarse que el sistema LATCH esté debidamente pasado a través de las aberturas y conecte el cinturón del sistema LATCH a los puntos de anclaje inferior (fig. a).
INSTALACIÓN - con el sistema del arnés y LATCH Abertura (fig. b) (fig. a) Tire para apretar (A) (B) (fig. c) (fig.
COLOCACIÓN DEL NIÑO EN EL ASIENTO DE SEGURIDAD PARA AUTOMÓVIL con el sistema del arnés Ajuste el sistema del arnés: ADVERTENCIA Para prevenir lesiones graves o la muerte: • El cinturón de seguridad del vehículo debe pasar por atrás del asiento de seguridad para automóvil cuando usa el sistema del arnés. Las correas del arnés deben pasar por las ranuras a la altura o apenas por encima de los hombros.
COLOCACIÓN DEL NIÑO EN EL ASIENTO DE SEGURIDAD PARA AUTOMÓVIL- con el sistema del arnés (continuación) 3 2 Apoyacabeza (en ciertos modelos) (fig. a) (fig. b) (fig.
COLOCACIÓN DEL NIÑO EN EL ASIENTO DE SEGURIDAD PARA AUTOMÓVIL- sin el sistema del arnés ADVERTENCIA Para prevenir una lesión seria o la muerte: • Debe usar siempre el cinturón de hombro/regazo del vehículo para asegurar su niño y el asiento. • El cinturón del hombro DEBE estar debidamente colocado sobre el hombro (NO tocando el cuello del niño y NO demasiado bajo con respecto al hombro).
COLOCACIÓN DEL NIÑO EN EL ASIENTO DE SEGURIDAD PARA AUTOMÓVIL- sin el sistema del arnés (continuación) Apoyacabeza (en ciertos modelos) Bucles (fig. a) (fig. b) (fig. c) (fig.
OPERACIONES y AJUSTES 1 Correas del arnés (fig. a): 4 • Posición reclinada: Deslice la lengüeta al frente del asiento de seguridad para automóvil para permitir que caiga el pie de la posición reclinada. • Para apretar: Tire de la lengüeta inferior del cinturón. • Para soltar: Tire de la lengüeta superior mientras tira las correas del arnés. 2 • Vertical: Deslice y mantenga la lengüeta al frente del asiento de seguridad para automóvil mientras empuja el pie de la posición reclinada hacia arriba.
OPERACIONES y AJUSTES (continuación) Aflojar Cinturón superior Apretar Cinturón inferior Ajustador (fig. a) (fig. e) (fig. b) (fig. c) (fig.
OPERACIONES y AJUSTES 7 (continuación) Cambio de las ranuras de las correas del arnés: Se DEBEN usar las ranuras que se encuentran a nivel o apenas encima de los hombros. A Suelte las correas del arnés: B Saque ambos bucles de las correas de los hombros de la placa de unión de la parte trasera del asiento (fig. f). C Cambie las ranuras de las correas del arnés.
OPERACIONES y AJUSTES 8 Cambio de las ranuras de las correas de la entrepierna: (continuación) D Deslice la vara de metal a través del bucle de la correa de la entrepierna y trabe la vara en el armazón del asiento. (fig. i). DEBE pasar por la abertura más cercana pero no por abajo del niño. A Dé vuelta el asiento de seguridad para automóvil, afloje la vara de metal usando un destornillador y tirando la vara fuera del extremo de la correa de la entrepierna (fig. g).
SISTEMA DEL ARNÉS - sacado y rearmado Pase los extremos de las correas del arnés a través de las ranuras de los hombros correspondientes en la parte de atrás de la almohadilla del asiento y asiento de seguridad para automóvil. Eliminación del arnes • Saque los bucles de la correa del arnés de las placas de unión en la parte de atrás y de abajo del asiento de seguridad para automóvil. • Tire las correas del arnés del asiento, cierre del arnés y lengüetas. 2 Guarde todas las piezas para uso en el futuro.
SISTEMA DEL ARNÉS - sacado y rearmado (continuación) 1 3 2 Placa de unión (atrás) 21
CINTURONES DE SEGURIDAD DEL VEHÍCULO ADVERTENCIA No todos los cinturones de seguridad de vehículos pueden usarse con un asiento para seguridad: • El asiento de seguridad para automóvil con el sistema del arnés DEBE estar firmamente sujeto en todo momento por medio de un cinturón de regazo (o la porción de regazo/hombros) que no se alergue ni se acorte durante el viaje. • El asiento de seguridad para automóvil sin el sistema del arnés DEBE usarse con el cinturón de regazo y el hombro.
CINTURONES DE SEGURIDAD DEL VEHÍCULO (cont.) ❃Cinturones de regazo ajustables manualmente Con el sistema del arnés: La placa de cierre en algunos cinturones de seguridad se puede deslizar y soltar tras abrocharla al asiento en ciertos ángulos. En este caso, de la vuelta a la placa de cierre (fig. a) y vuelva a abrocharlo. Compruebe la instalación de nuevo para ver si funciona. Si no, coloque el asiento de seguridad para automóvil en otro asiento diferente.
CINTURONES DE SEGURIDAD DEL VEHÍCULO ❃ Cinturones del vehículo con retractor Con el sistema del arnés: Los cinturones del vehículo con retractor pueden o no sujetar el asiento firmemente. Siga estos pasos para determinar si tiene un sistema retractor que sujete el asiento de seguridad para automóvil firmemente: a. Saque el cinturón de seguridad del todo. b. Deje que el cinturón se retraiga aproximadamente 6 pulgadas (15 cm). c. Saque el cinturón de nuevo.
CINTURONES DE SEGURIDAD DEL VEHÍCULO (cont.) ❃ Cinturón pasivo - Cinturón del vehículo con cinturón para el hombro motorizado Con o sin el sistema del arnés: NO SE DEBE usar con ningún asiento de seguridad para automóvil. ❃ Cinturón pasivo - Cinturón del vehículo el hombro montado en la puerta Con o sin el sistema del arnés: NO SE DEBE usar con ningún asiento de seguridad para automóvil. Los cinturones no se mantendrán apretados durante la conducción.
CINTURONES DE SEGURIDAD DEL VEHÍCULO ❃ Cinturones ubicados delante Pliegue del asiento del pliegue del asiento Con el sistema del arnés: Los cinturones de seguridad del vehículo ubicados delante del pliegue en el asiento quizá no sujeten bien el asiento. Consulte el manual del propietario del vehículo o visite el concesionario del vehículo para informarse sobre los requisitos de instalación de los asientos de seguridad.
CINTURONES DE SEGURIDAD DEL VEHÍCULO (cont.) cinturón del ❃ Combinación vehículo y el hombro con placa de cierre con traba Con el sistema del arnés: Déle la vuelta PUEDE usarse. Use el manual del propeitarío del vehículo para obtener instrucciones específicas sobre cómo usar los cinturones de seguridad del vehículo. La placa de cierre con traba en algunos cinturones de seguridad se puede deslizar y soltar tras abrocharla al asiento en ciertos ángulos.
CINTURONES DE SEGURIDAD DEL VEHÍCULO (cont.) ❃ Combinación cinturón del vehículo y el hombro con placa de cierre deslizante Con el sistema del arnés: Tire de la placa de cierre (fig. a). Si el cinturón se desplaza libremente por la placa de cierre, se DEBE usar una traba de seguridad. (Vea la sección "Traba de seguridad", en la página 29.) Sin el sistema del arnés: Este sistema de cinturón de seguridad del vehículo PUEDE usarse con la asiento para niños.
CINTURONES DE SEGURIDAD DEL VEHÍCULO ❃ Traba de seguridad ADVERTENCIA Evite lesiones graves o la muerte: • No usar la traba de seguridad donde se requiere resultará que el asiento quede bien sujeto. • Saque la traba de seguridad de los cinturones de seguridad cuando no lo utilice con el asiento de seguridad para automóvil. • NO use la traba de seguridad para acortar la longitud del cinturón de seguridad.
INFORMACIÓN ADICIONAL ❃ Almacenaje del sistema LATCH GUARDE SIEMPRE EL SISTEMA LATCH CUANDO NO LO USA. • Ubique los bucles de almacenamiento del sistema LATCH en la parte de o abajo de la almohadilla del asiento de seguridad para automóvil (fig. a). • Sujete el sistema LATCH al bucle de almacenamiento como se indica (fig. b). Repita para el otro conector. ❃ Rearmado del LATCH (fig. a) (fig.
INFORMACIÓN ADICIONAL (continuación) ❃ Almacenaje del anclaje La correa del anclaje puede usarse con los asientos de seguridad cuando se usan como apoyo de posición del cinturón (sin el arnés) para mantener estabilizada la parte de arriba del asiento de seguridad para automóvil. Lea y cumpla el manual de instrucciones para el uso del asiento de seguridad para automóvil como apoyo de posición del cinturón.
INFORMACIÓN ADICIONAL (continuación) ❃ Soporte del vaso Este asiento de seguridad para automóvil incluye un soporte del vaso. Para su mantenimiento, use las instrucciones de cuidado y limpieza para la almohadilla del asiento y del apoyabrazos.
INFORMACIÓN ADICIONAL (continued) ❃ Cuidado y limpieza Retirar las almohadillas: Si usa el sistema del arnés, saque el sistema del arnés (Vea la sección "Sistema del arnés - sacado y rearmado", en la página 20). 1 Saque los ganchos "J" de las ranuras delanteras. 2 Desenganche el elástico de los ganchos "J". 3 Tire las dos trabas de botón hacia fuera (ubicada en el interior de la almohadilla del asiento) y saque la almohadilla.
INFORMACIÓN ADICIONAL Almohadillas del asiento y del apoyabrazos: Se lavan a máquina por separado en el ciclo delicado y se secan al aire. Correas del arnés: Se lava la superficie solamente con un jabón suave y un paño mojado. Si las correas del arnés están deshilachadas o muy sucias, DEBEN reemplazarse. Armazón: Se limpia con una solución de jabón y agua. Evite mojar las etiquetas. Nunca use detergentes de uso doméstico que puedan debilitar el plástico. Hebilla: Enjuague la hebilla con agua tibia.
NOTAS 35
LISTA DE PIEZAS Cómo hacer pedidos: Complete el formulario en la página que sigue. SE DEBEN incluir los números de modelo y de serie de su sistema de seguridad para niños en el formulario para garantizar los repuestos correctos. El número del modelo puede encontrarse en una etiqueta ubicada abajo de su asiento de seguridad para automóvil. Debe incluir el pago con su pedido. Las piezas también se pueden pedir desde la página Web de Century en www.centuryproducts.com.
N° de modelo, (Se requieren ambos números) ENVÍE A: Nombre y apellido N° de serie Cheque o giro adjunto (a nombre de Century Products) Cóbrese a la tarjeta de crédito Visa MasterCard Discover Dirección N° de cuenta Ciudad, Estado, Código postal Fecha de vencimiento Teléfono (incluido el código de área) Firma Dirección E-mail Subtotal: Gastos de envío y manejo*: $5.00 Almohadilla de tela del asiento con Comfort Clips® ..........$35.
1 Doble el manual de instrucciones. Si falta alguna pieza o resulta dañada, o necesita obtener ayuda o pedir repuestos, NO devuelva el asiento de seguridad para automóvil a la tienda. LLÁMENOS PRIMERO Llame gratis al 1-800-837-4044 desde cualquier lugar de los EE.UU. o Canadá o envíenos un fax al 1-610-884-8370. 2 Guárdelo en el bolsillo. o escríbanos a: Century Products 150 Oaklands Blvd. Exton, PA 19341 Atención: Customer Service Department Bolsillo Century Products Graco Children's Products Inc.