C4000LZ Dual-Band Wireless AX VDSL2 Gigabit Gateway Version 1.1 Edition 1, 01/2020 Quick Start Guide Default Login Details LAN IP Address User Name Password http://192.168.0.
Device Panels LED LIGHT / WPS BUTTON 2
USB SLOT ETHERNET PORTS 1-4 PORT DSL LED DSL PORT RESET 3
Overview The Device is a Wi-Fi 802.11ax 4-port combo WAN VDSL gateway. The Device allows wired and wireless clients to safely access the Internet. Additionally, the Device includes a Gigabit Ethernet LAN port that can also serve as a WAN connection to support a dual WAN function. The USB port allows you to connect a USB memory stick or USB hard drive for storing or sharing files through the network. Requirements Make sure you have the following things before you start.
Hardware Connections 1. Use a telephone cable to connect your Device’s DSL port to a telephone jack (or the DSL or modem jack on a splitter if you have one). 2. ETHERNET: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access. 3. USB: You can connect a USB memory stick or a USB hard drive for file sharing. The Device automatically detects the USB device. Alternatively, use a USB cable (not provided) to connect a USB printer to this port.
4. POWER: Use the provided power adaptor to connect the POWER socket to an appropriate power source. Make sure the power at the outlet is on. Look at the LED lights on the front and rear panels. • The front LED light blinks while your Device starts up and is solid blue once it is ready. • The DSL light on the rear panel is solid green after your Device has a DSL connection. • Each ETHERNET light is on if the corresponding LAN port is properly connected and blinks when there is traffic.
4. If the automatic connection is not successful, check your connections and restart the Device. Also, make sure you have entered the user name and password correctly. If you still cannot access the Internet, follow the steps in the next section to manually configure the Internet connection. Manual Connection You can also manually log into the Device’s Web Configurator and configure the Internet connection. 1.
3. The main screen appears. Click Quick Setup to configure the Device’s Internet access. 4. Enter the user name and password provided by your ISP. Click Apply to finish the configuration.
5. The DSL light and front LED light are green on your Device when the Internet is ready for you to use. If you still cannot access the Internet, contact your ISP. Set Up a Wireless Network You can set up a wireless network using the following methods: Using Wireless Protected Setup (WPS) Press the WPS button on the Device’s front panel for more than 5 seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless network using the WPS button. Place the devices you want to connect near one another. Press the W PS button on the Device. Press the W PS button on a compatible device within 2 minutes of pressing the button on the Device. The front LED light on the Device blinks white when connection is in progress and blinks white and green when connected. Set Up a Wireless Network Manually The wireless LAN on your Device is enabled by default.
Federal Communications Commission (FCC): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC REQUIREMENTS: This equipment complies with TIA-968-B of FCC Rules. On the bass unit of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called.
COMPANY: ZYXEL Communications Inc. ADDRESS: 1130 N. Miller St., Anaheim CA, 92806 USA TEL NO.: 714-6320882 Safety Warnings • • • • • • • • • • • • • • • • • Do NOT expose your device to dampness, dust or corrosive liquids. Do NOT store things on the device. Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do NOT open the device or unit.
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately. IMPORTANT SAFETY INSTRUCTIONS • • • • • • • • • • Caution! The RJ-45 jacks are not used for telephone line connection. Caution! To reduce the risk of fire, use only No. 26 AWG or larger (e.g.
