Operating Manual

dok1702-us-07-0221 11 / 20
3.1 Plug connections
Place the plug
on the socket. Make sure
that the red dot on the plug
and socket match.
Turn the plug carefully
on the socket until it
something slides into
the socket.
Press the plug into
the socket until you
feel it lock into place.
To disconnect the
plug, grasp only the
front part of the plug
and carefully pull
the plug out of the
socket.
CAUTION
The locked connector must neither be twisted (Figure 5) nor kinked (Figure 6). Improper
handling can damage the connector.
Never pull on the cable of the plug connection. Pulling on the cable can damage the connector
(Figure 7).
NO
NO
4 - Connect and disconnect the plug connection
5
6