Operating Manual

dok1702-us-07-0221 18 / 20
13.1 Display remaining capacity
Press up to
Press up to
Press
Press for
select
The remaining capacity can be requery via the menu (see diagram). The displayed value is an estimate
designed for the following types of batteries and accus:
- LiPo accu pack (Article Number: 4024002)
- Ansmann Alkaline AAA Battery (Article Number: 4006504 – 2 piece)
- Panasonic eneloop AAA NiMh Accu (Article Number: 4008010 – 2 piece)
Using other types may lead to different results. A converted to the estimated remaining time is possible
when using the LiPo battery pack. A general approximate indication of the state of charge is given by
the status LED.
13.2 Display remaining time (only when use Li-Po accu pack)
Press up to
Press up to
Press
Press for
select
The values only indicate the remaining estimated runtime based on the percentage of remaining
capacity. This estimated runtime depends to a significant extent on the usage scenario and is
permanently adjusted to this scenario.
13.3 Status LED
approximately
34%
-
100%
capacity green
approximately
10%
-
33%
capacity yellow
approximately
5%
-
9%
capacity red flashing - 2s-cycle
approximately
0%
-
4%
capacity red flashing - 200ms- cycle
DECT
X
MENU
--)
STANDARD
X
MENU
--)
DECT
X
OK
--)
INFO
X
ZUSTAND
--)
31%
status LED
MENU
X
MENU
--)
STANDARD
X
MENU
--)
DECT
X
OK
--)
INFO
X
RESTZEIT
--)
21h35min