Operating Manual

dok1702-us-07-0221 7 / 20
Definition
FP = Fixed Part (Base / Basis) – e.g. CT-DECT Case
PP = Portable Part (Standard / Mobilteil)
DNR = Digital Noise Reduction (Digitale Unterdrückung störender Geräusche)
Sidetone = S/T audible feedback of your voice
GC Multi = Profile for GateCom Multi (aircraft ground handling)
2 Purpose
The CT-DECT Multi M7 is a mobile communication device based on DECT radio technology.
It enables the user to connect wirelessly to a CT-DECT network and thus use a voice communication
(full duplex). The CT-DECT Multi M7 can use only as an “PP” device.
2.1 Profiles
The device can be set to different profiles.
Profil
PP/FP
Application
Standard
PP
General DECT application as standard device
Expert
PP
Expert mode – for use by trained personnel only
GC Multi
PP
DECT application as standard device - aircraft ground handling
How to change the profiles is described in section 8.
A DECT system always consists of a base station (FP / Base e.g. CT-DECT Case) and at least one
mobile device (PP / Standard).