User manual

11
2.2.1 GT864 E with Audio connector
The USB connector supports the connectivity of a headset or any other audio equipment using
the analogue microphone and loudspeaker interface of GT864-QUAD Terminal. The table below
describes the signals on the USB connector.
GT864 E Pin Layout for Mini USB connector:
Figure 5: Mini USB Type A/B connector
PIN
Signal
Color
1
MIC -
Yellow
2
EAR -
Red
3
MIC +
White
4
EAR +
Turquoise
5
(GND not
necessary for audio)
Black
Table 3: Mini USB Signal Color
The colours of the cable are only for the cable delivered by company CEP! If you
use other cable, please check the pinning before!
Voice Features please read the AT command manual for integration:
Telephony, Emergency call
Half rate, full rate, enhanced full rate and adaptive multi rate voice codec
(HR, FR, EFR, AMR)
Superior Echo cancellation & noise reduction
DTMF
2.3 Antenna Connector
The antenna connector allows transmission of radio frequency (RF) signals between the
modem and an external customer-supplied antenna. The modem is fitted with a 50Ω, FME
male coaxial jack.