User manual

17
4 Power consumption
The following table shows you the power consumption of the GT864 E in different modes
(average over 1 minute interval):
[mA] @ 12V
GT864 Standby
< 20
GT864 idle mode
< 3
Table 7: Power consumption in idle and low power mode
Safety and Product Care
Please read the information in this section and the information in “Installation of the
Modem”, before starting your integration work!
4.1 Safety instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A COPY OF THEM.
 Always ensure that use of the modem is permitted. The modem may present a hazard if used in
proximity to personal medical electronic devices. As a rule, the modem must not be used in
hospitals, airports or planes.
 Never use the modem at a gas station, refuelling point, blasting area or in any other environment
where explosives may be present.
 Operating the modem close to other electronic devices, such as antennas, television sets, and
radios may cause electromagnetic interference.
 This product is intended to be used with the antenna or other radiating element at least 20cm
away from any part of the human body. In applications where this rule cannot be applied, the
application designer is responsible for providing the SAR measurement test report and
declaration.
 You are responsible for observing your country's safety standards, and where applicable, the
relevant wiring rules.
4.2 General precautions
The GT864 E Terminal as a stand alone item is designed for indoor use only. To use outside it
must be integrated into a weatherproof enclosure. Do not exceed the environmental and
electrical limits as specified in “Technical Data”.
 Avoid exposing the modem to lighted cigarettes, naked flames or to extreme hot or cold
temperature.