User's Manual Part 9

Table 1. Mount Parts List
Item Description Part no. Qty*
1 Square washer 224349 3
2 Bevel washer, thin 224322-1 6
3 Bevel washer, thick 224322-2 2
4 Rectangular washer 224348 4
5 Front strut angle 224422 1
6 Rear strut angle 224406 1
7 Strut plate 224410 1
8 Spacer plate 224479 3
9 Turnbuckle 224403-1 2
10 M12 U-bolt 204031-1 2
11 M10 U-bolt 204031-3 1
12 Antenna support band 42922A-1 2
13 Crossbar 224320 2
14 M12 lock washer 100522-45 18
15 M12 hex nut 100526-45 18
16 M10 lock washer 100522-39 12
17 M10 hex nut 100526-39 12
18 M10 x 50 mm hex bolt, gs 100534-63 1
19 M10 x 35 mm hex bolt, gs 100534-36 8
20 M12 x 70 mm hex bolt, gs 100535-84 2
21 M12 x 50 mm hex bolt, gs 100535-48 2
22 M12 x 35 mm hex bolt, gs 100535-21 4
23 M12 x 45 mm carriage bolt, gs 204026-2 5
24 M12 flat washer 100521-45 7
25 M10 flat washer 100521-39 8
26 Base plate 224321 1
27 Angle 224766 2
28 Channel 224324 1
29 Strut 224409 1
* Includes spares
gs galvanized steel
Table 2. Fastener Torque Specifications
Fastener Torque value in N·m (lb·ft ) for each fastener size
Size M5 M6 M8 M10 M12 M16
Galvanized 2.7 4.5 11.1 22 38 95
steel (2) (3.3) (8.1) (16.2) (28) (70.1)
8
Adjust elevation and azimuth. Make sure
that all strut attachment hardware is
loosened before making either adjustment.
Tighten turnbuckle jam nuts to hold the
adjustments. Then, tighten the remaining
adjustment hardware according to Table 2.
Elevation
Loosen bolts indicated
by arrows and
rotate turnbuckle
Loosen jam nuts
and rotate
turnbuckle
Azimuth
Loosen bolts indicated
by arrows and
rotate turnbuckle
Strut: loosen all
attaching hardware
for elevation or
azimuth adjustment
Loosen jam nuts
and rotate
turnbuckle