How-To Guide Chapter 5

Chapter 5. Operation FibeAir 1500 Installation & Operation Manual
5-20 Windows and Menus Revision 2.0
Viewing the Alarm Log File
To view the alarm log file, follow these steps:
1. Select Alarms ½ View Log File.
The Alarm Log File window is displayed.
Figure 5-22 Alarm Log File Window
When the system reaches 80% capacity, it automatically saves the current
alarms in a log file. These files are stored in the following directory:
C:\GIGANETVIEW\LOG
where C:\GIGANETVIEW is the directory in which you installed the Giganet
View software.
The Alarm Log File window displays the following information:
Date The date the alarm was triggered.
Time The time the alarm was triggered.
Severity The severity of the alarm.
Alarm
Description
A description of the alarm.
Saving a Log File
To save a log file as an ASCII file, click on the Save button. The file is
saved in the same directory where GigaView software installed, as
described above.