Installation Instructions Chapter 4

Chapter 4. System Setup FibeAir 1500 Installation & Operation Manual
Revision 2.0 Logging In 4-19
4.4. Logging In
To perform the management operations, enter the management software,
as explained below.
1. Select Start ½ Program ½ GiganetView.
After the RunEnv Parameters window (Figure 3-7) the Login window is
displayed.
Figure 4-11 Login Window
2. To log in, enter your password and click OK.
By default, your initial read/write password is giganet. This password
can be changed later.
After logging in, the Work Area and Physical View windows are
displayed.