Installation Instructions Chapter 4

FibeAir 1500 Installation & Operation Manual Chapter 4. System Setup
4-28 Line Interface Connection Revision 2.0
4.9. Line Interface Connection
After setting up all the previous parameters and establishing the radio link,
the Line Interface can be connected to the IDU.
All the available interfaces of the FibeAir 1500 system are described in
Chapter 8.
The terminology used with the interfaces is:
 Connectors or signals labeled as “TX” indicates that the signal is a signal
outbound from the FibeAir 1500.
 Connectors or signals labeled as “RX” indicates that the signal is a
signal inbound to the FibeAir 1500.