User's Manual Chapter 3

FibeAir 1500 Installation & Operation Manual Chapter 3. Installation
Revision 2.0 Installation Instructions 3-11
Figure 3-7 RunEnv Paramaters Window
5. In the RunEnv Parameters window, leave the Window Name field
unchanged.
6. In the
Agent Address field, enter the IP address of the FibeAir 1500
serial port.
7. Leave the
Protocol field unchanged.
8. In the
Read Community field, enter the Read community.
The default value is public.
9. In the
Write Community field, enter the Write community.
The default value is netman.
10. Leave the
Source Address field unchanged.
11.Click OK.
The Login window is displayed.
Figure 3-8 Login Window
12. To log in, enter your password and click OK.
By default, your read/write password is giganet.
After logging in, the Work Area and Physical View windows are
displayed (see Chapter 5 for details).