User's Manual Chapter 3

FibeAir 1500 Installation & Operation Manual Chapter 3. Installation
Revision 2.0 Installation Instructions 3-9
3.9.8. Setting the Baud Rate (for serial connections)
1. Double-click on the My Computer icon of the Windows Program
Manager. My Computer window is displayed.
Figure 3-4 The My Computer Window
2. Double-click on Dial-Up Networking.
The Dial-Up Networking window is displayed.
3. On the icon, which was added after performing the steps detailed in
Appendix A. SLIP Driver Installation , click the right mouse button and
select the Properties option.
The Properties window is displayed.
4. In the Connect Using section of the Properties window, click on Direct
Connection and click on the Configure push-button.
The Configure window is displayed.
5. Select the General tab.
The General window is displayed.
6. Set the Maximum Speed to 19,200.
7. Click OK.
The Configure window is closed.