User Manual
Safety Instructions Before using this product, read the following safety instructions and follow all conventional safety precautions. Read this manual carefully, and keep it properly. Any operation not conforming to this manual may cause damage to this product. ! 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. ! Caution Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.
Table of Contents .............................................................. 2 Product Composition/Parts Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Usage/Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Usage/Robot Charging . . . . . . . . . . . . . . . . . . . . . . . . .
Product Composition/Packaging Contents 1x Robot 2x 7Battery 1x Self-Empty Station 2x Side Brushes Instruction 1x Mopping Pad 1x Remote Control 1x Charging Cable 1x Cleaning Brush 2 1x User Manual
Product Composition/Parts Name Top View Surface Cover Recharge Button Start/Pause Wi-Fi Button Omnidirectional Lens Dustbox/Watertank Button Buttom View Anti-falling sensor Universal Wheel 2x Side Brush Battery 2x Driving Wheel Rolling Brush Assembly Watertank/Dustbox 3
Product Composition/Parts Name Primary Filter Mopping Pad Sponge Hepa Filter Water insert port Watertank/Dustbox Dust Bag Screen Display Dust Cover Signal Indicator Power Socket Wire Storage Charging Pins Dust Collecting Mouth 4 Auto Cleaning Switching Mode Start / Pause Direction Control Time Scheduling Setting Clock Setting Recharging
Product Usage / Preparation ! Notes 1.Before starting the vacuum cleaner, clean up wires and sundries scattered on the ground, and remove easy-to-fall, fragile, valuable and potentially dangerous items. Avoid being entangled, jammed, dragged, or knocked down by the main unit; otherwise, personal or property damage may be resulted. 2.Avoid using this product in a watery area, otherwise the fan may be damaged and the performance of the vacuum cleaner will be affected. 3.
Product usage/preparation 1.Before using the robot, please remove the protective strip from both sides. 3.Place the Self-empty Station on a hard and level surface against the wall. Connect the power supply. Do not place any items 1.5 ft or 0.5m to the left and right and 5 ft or 1.5 m in the front of the self-empty station. Confirm that the dust bag has been installed and the dust cover has been closed. 2.Install the side brush.
Product Usage/Robot Charging 4. Charging: Place the Robot on the self-empty station for charging (the recharging indicator light flashes during charging and it’s steady when charging is finished. The charging time is about 5-6 hours.) During the cleaning process, the Robot can sense that the power is insufficient and automatically start the recharging mode to find the self-empty station. You can also command the robot to start the recharging mode through the APP.
Product Use/Wi-Fi connection 1. Download Smart Life APP from your APP store, register and log in the APP. Make sure that Wi-Fi is 2.4GHz before network connection. 2. Preparation: tap “+” on upper-right corner to add your robot.
3. Support two network connection methods. Method 1(BT mode, recommend) - Choose “Robot Vacuum Cleaner(BLE)” in Small Home Appliance column. - Long press Wi-Fi button on robot for 3s’, make sure that Wi-Fi indicator light is blink. Tick “Confirm the indicator is blinking rapidly” in APP interface and then click “Next” - Ensure your mobile bluetooth is ON, the APP will automatically search the robot nearby, click “Add” after find it.
Method 2(AP mode): - Choose “Robot Vacuum Cleaner(Wi-Fi)” in Small Home Appliance column. - Make sure that Wi-Fi is 2.4GHz and input correct Wi-Fi password. - Long press Wi-Fi button on robot for 3s’, make sure that Wi-Fi indicator light is blink. Tick “Confirm the indicator is blinking rapidly” in APP interface, click “Next” and choose AP mode in pop-up window. - Find password-less hot-spot which started with SmartLife-XXXX in your Wi-Fi list and click to connect it.
Product Usage/Start Cleaning Random Cleaning According to different cleaning needs, this product has a variety of cleaning mode to choose from. You can start various cleaning mode through a Robot, remote control or app. Applicable scenario： Used for single room cleaning Setting method：press Mode Switching button on the remote control to choose random cleaning. Reminder：Please close the door while clean the single room.
Product Usage/Pause, Wakeup And Turn Off Pause: Press the robot button or pause button on remote control to pause the robot. Wake Up: If the robot stops working more than ten minutes，it will automatically enter sleep mode(all the robot lights are off). You can wake up the robot by clicking the robot start button first, then click the robot start button or any button on the remote control or APP to restart your work. Turn Off: Long press the robot button after it stops working.
Product Usage/Water Tank Usage ! Notes： Do not use the mopping function on carpets. Please empty the water tank in time and remove the mopping pad after mopping. Please keep the outside of water tank dry before use. A. Add water ! B. Install the mopping pad C. Install the water tank assembly Notes： The water tank can be added with detergent or 84 disinfectant as cleanser (concentration ≤5%), and non-specified cleanser should not be used.
Component Maintenance/Scheduled Maintenance Scheduled Maintenance To achieve the best cleaning effect, clean and maintain the robot regularly according to the table below.
Component Maintenance/2 in 1 Water Tank A. Press the dustbox button and take out the water tank B. Empty the water tank C. Open the dustbox and dump the garbage D. Take out HEPA filter and primary filter. HEPA filter is not recommended to wash by water. Tap gently to remove the dust E. Wash the dustbox and the mop F. Dry the dust box and filter components, keep them dry to ensure their service life ! Notes： Before installing filters, ensure that the primary filter and HEPA filter are dry.
Component Maintenance/Main Brush and Side Brush A.Open the main brush cover assembly hair C.Use toll to clean the tangled； Clean the main brush Clean the side brush B.
Component Maintenance/Charging Electrode,Anti-falling sensor, Drive Wheel And Universal Wheel ! Notes：Charging electrode, Anti-falling sensor and bumper assembly contain sensitive electronic components, please use dry cloth to clean them, and do not use wet cloth to prevent damage caused by water. Clean the charging pins Clean the cliff Anti-falling sensor Clean the drive wheels and universal wheel ! Notes： If you do not use the product for a longtime, please fully charge it before storing.
Replace the dust bag ! Notes：Replace the dust bag when the dust is full.
Toubleshooting Item Prompt Tone Failure Cause Solution 1 Wheel suspended in air Robot suspended Put the robot back to the ground and press the cleaning button again 3 Left/Right wheel abnormal Wheel jammed Check whether the wheel is entangled with foreign objects and clean up the entangled 4 Bumper stuck Bumper stuck Check whether the bumper can rebound normally 5 Connection failed Robot failed to connect to server Check whether the Wi-Fi connected during networking can connect to the int
Robot automatically enters the recharge mode Classification Robot Self-Empty Station Battery Cleaning Parameters Power ! Items Parameters Diameter Φ320mm Height 74mm Net weight 2.62kg Self-empty Station Size 280*193*320mm Weight 3.5KG Voltage 14.
Security Information Hazardous Substance Component Type Hexavalent chromium Polybrominated biphenyls (Cr(VI)) and its (PBB) compounds Poly Brominated Diphenyl Ethers(PBDE) Lead (Pb) and its compounds Mercury (Hg) and its compounds Cadmium (Cd) and its compounds Plastic parts O O O O O O Metal parts X O X O O O Circuit module of the Robot X O X O O O Electronic component O O O O O O Battery O O O O O O Power cord (Metal part) X O X O O O O: It means that the co
! Product name: Robot Vacuum Cleaner Product model: C5 Manufacturer: Shenzhen Free Dynamics Development Co., Ltd. Address: Room 1201, South Block, Yuanxing science and technology building, Nanshan District, Shenzhen, China Web.: www.freedynamics.com Frequency Range: 2412MHz-2472MHz for WIFI; 2403MHz-2480MHz for bluetoot Max. Power: 20.
