Installation & Assembly

Casia Pendant

Installation Instructions

General Product information

This product is suitable for dry and damp locations.

This product is dimmable using most standard TRIAC or

ELV dimmers.

This product is to be installed to a standard 4” junction box

with 3” round plaster ring or an octagon junction box.

CAUTION - RISK OF FIRE

This product requires installation by a qualied

electrician. Before installing be sure to read

all instructions and TURN POWER OFF TO THE

JUNCTION BOX

Untighten the set screw on the cord grip. Feed the cord from the shade through the canopy nut, the canopy, the crossbar assembly,

and the cord grip.

Measure the desired height (H) that you want the xture to hang below the ceiling. Once you have reached your desired length,

tighten the set screw on the cord grip.

Adjusting the Fixture Height

Casia 14 Casia 18 Casia 22

crossbar assembly

canopy nut

canopy

cord grip

set screw

PAGE 1
Casia Pendant Installation Instructions General Product information This product is suitable for dry and damp locations. This product is dimmable using most standard TRIAC or ELV dimmers. This product is to be installed to a standard 4” junction box with 3” round plaster ring or an octagon junction box. CAUTION - RISK OF FIRE This product requires installation by a qualified electrician.
PAGE 2
Casia Pendant Installation Instructions Electrical Connections 3 Use the provided 8-32 machine screws to fasten the crossbar assembly onto the junction box. Connect a grounding wire to the green ground screw on the crossbar assembly. 4 Grab the fixture wires and the line voltage wires from the junction box and use wire nuts to make your electrical connections. After the electrical connections have been made place the wires into the junction box.