Other
CERNOGROUP.COM 949.715.1534 1751 MCGAW AVE, IRVINE, CA 92614
Oiled Walnut, Dark Stained Walnut, Maple
Cleaning: Wood surfaces should be dusted and cleaned with furniture polish (Pledge).
Brushed Aluminum
Cleaning: Everyday cleaning of metal surfaces can be done with a damp cloth.
Repair: To remove scratches from brushed aluminum, use Scotch-Brite (Gray or Maroon)
to bu the scratched area. In a pinch, you can use the rough side of your kitchen sponge.
Polymer
Cleaning: To clean polymer surfaces, use a damp cloth with soap and water or typical cleaners.
Avoid heavy-duty cleaners (i.e. anything solvent-based), as they can damage the material.
Repair: Scratches can be bued out of polymer surfaces using 200 - 300 grit sandpaper.
Shade Material
Cleaning: Burlap and Linen: Blow away dust and dirt particles with compressed air.
Avoid using water or a vacuum to clean burlap or linen shades.
Ebony and Birch: Treat these shades as Veneer (see below).
Veneer
Cleaning: When cleaning veneer, take care not to peel the edge as it can de-laminate the veneer.
Clean with furniture polish (Pledge).
Black Anodized Aluminum
Cleaning: Everyday cleaning of metal surfaces can be done with a damp cloth.
Regularly maintaining your Cerno® product is easy and will help keep it looking beautiful. Scratches can be bued out in minutes.
Wood surfaces will be revitalized with minimal eort every few years. The LED light source is rated to last 50,000 hours, and should last the
life of the product.
Cerno® products include a 2 year performance guarantee warranty. In addition to Cerno’s warranty, Cerno oers an in-house repair service
for the life of the product. Note that some materials cannot be repaired.
Recommended products
Pledge
200-300 Grit Sandpaper
(for repairs)
Compressed Air
Scotch-Brite (for repairs)
Damp Cloth
Damp Cloth
PledgeDamp Cloth
Damp Cloth
Proper care and maintenance of your Cerno® product