Table of Contents Safety & assessors sms seamstress 1 Overview.. Operation. Safety & Warnings « Read all instructions before using the appliance and retain for reference. « Do not use for extended periods of time. Harm can be caused to the internal components if used for more then 15 minutes at a time. « If you notice that the unit has become abnormally hot or starts to make an odd noise, turn the unit off and let it cool down for at least 30 minutes.
APPLICATIONS Car/Truck Tyre Bicycle Tyre Inflatable sports equipment Air Mattresses Stroller Tyre BALL ADAPTER PIN USES Basketballs Footballs Soccer Balls Volleyballs Workout Balls BALLOON ADAPTER PIN USES Balloons Alr mattresses Pool Toys Product diagram 2: Safety switch 9. Balloon adapter pin 3 7: Pressure hose 8. Ball adapter pin 10.
1. Open the bottom compartment to reveal the Car Power Cable, Pressure Hose, Ball Adapter Pin, Balloon Adapter Pin and Bicycle Tyre Valve. (Figure A) Figure A 1st 2. Unwind the Car Power Cable and make sure that it is routed through the cord pass-through notch.
3. Loosen the Air Nozzle by turning counterclockwise. (Figure C) (Note: Do not remove the Air Nozzle from the unit.) Figure € 4, Firmly push the Pressure Hose (threaded end first) through the Air Nozzle and into the unit. Then tighten down the Air Nozzle by turning it clockwise. (Figure D) {Note: Do not attempt to thread the pressure Hose into the unit: simply push in.) Bahrain .
5. Plug the unit’s power cable into one of your car’s outlets. Refer to your vehicle’s owner manual for the recommended Tyre pressure and set the unit to the appropriate PSl. (Figure E) Before the next step, ensure the unit’s safety switch is set to the unlock(right) position. (Figure E) Note: Take care not to close door on power cable. Tow s 6. Unscrew the Tyre's valve stem cap and keep it in a safe place while the Tyre is inflated. Next, screw the pressure hose onto the valve stem of the Tyre.
