Description of Symbols Caution Read the operating instructions to reduce the risk of injury Wear ear-muffs The impact of prolonged exposure to loud noise can cause damage to hearing. Wear a breathing mask. Dust is injurious to health, and will be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles. Sparks, splinters, chips and dust emitted by the device during use can cause loss of sight.
2) Electrical safety a) b) c) d) e) f) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions.
) Power tool use and care a) b) c) d) e) f) g) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
f) g) h) operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the power tool "live" and shock the operator. When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the chance of blade binding. Always use blades with correct size and shape (diamond versus round) of arbour holes.
Safety instructions for circular saws a) Check guard for proper closing before each use. Do not operate the saw if guard does not move freely, and enclose the blade instantly. Never clamp or tie the guard so that the blade is exposed. If the saw is accidentally dropped, the guard may be bent. Check to make sure that guard moves freely and does not touch the blade or any other parts, in all angles and depths of cut. b) Check the operation and condition of the guard return spring.
WARNING！ Some dust created by power planing, cutting and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: 1. Health defects resulting from vibration emission if the product is being used over long periods of time, or exposure is not adequately managed and properly maintained. 2.
Supplied package Open the packaging and take out the equipment with care. Remove the packaging material and any packaging and/or transportation braces (if available). Check to see if all items are supplied. Inspect the equipment and accessories for transport damage. If possible, please keep the packaging until the end of the warranty period. Important! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts.
Sound and vibration Sound and vibration values were measured in accordance with EN 60745 LpA sound pressure level: 90 dB(A) KpA uncertainty: 3dB LWA sound power level: 101dB(A) KWA uncertainty: 3dB Wear ear-muffs. The impact of noise can cause damage to hearing. Total vibration values (vector sum of three directions) determined in accordance with EN 60745. Handle Vibration emission value ah=2.085 m/s² K uncertainty=1.
Extraction of dust and chips Connect your tool to an extraction unit or vacuum cleaner. This will provide excellent extraction of chips and dust from the workplace. The benefits are that you will protect both the equipment and your health. Your work area will also be clean and safe. Attach the adapter for the dust extraction system to the connection for the dust extraction system. You can then connect a suitable vacuum cleaner (not supplied) to the dust extraction system adapter.
the blade. The soleplate must not jam and must return to its initial position after the operation has been completed. Before you use the electric mini circular saw, check the function of the soleplate with the mains plug disconnected. Before you use the machine, ensure that the safety equipment such as the soleplate, flanges and adjustment devices are in working order and are correctly adjusted and secure. You can connect a suitable dust extraction system to the dust extraction adapter.
Changing the saw blade Important! Always pull out the power plug before doing any work on the circular saw! Only use saw blades of the same type as the saw blade supplied with this circular saw. Ask the customer support team for advice. Important! The electric mini circular saw must not be operated with the Allen key inserted in it.
Replacing the battery Ensure that the laser is switched off. Remove Reset button the battery compartment cover. Remove the flat battery and replace with a new one (button cell CR2032). Check that the battery terminals are positioned correctly when inserting the new batteries. Close the battery compartment again. In case of overloading, e.g. due to the saw blade becoming jammed, the equipment will shut down automatically. To restart, you must first press the reset button.
Disposal and recycling The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council. Storage Store the equipment and accessories out of children’s reach in a dark, dry place at above freezing temperature.
