SDS

Structus®
Revision: March 29, 2016
CT20-01
SAFETY DATA SHEET
Page 2 of 6
4.2 Most important symptoms / effects acute and delayed:
Eye Contact: Particles from cutting may cause irritation as an abrasive in the eye.
Skin Contact: Sharp edges may cut the skin.
4.3 Indication of any immediate medical attention and special treatment needed:
Not applicable
Section 5: Firefighting Measures
5.1 Extinguishing media:
Use water and other extinguishing media appropriate to the surrounding fire conditions.
5.2 Specific hazards arising from the product:
Product is combustible if involved in a fire.
Under fire conditions products of combustion may include sulfur oxides, carbon monoxide and carbon dioxide.
5.3 Special protective equipment and precautions for fire-fighters:
As for any fire, evacuate the area and fight the fire from a safe distance. Firefighters must wear full protective equipment
including self-contained breathing apparatus with chemical protection clothing.
Section 6: Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures:
Wear gloves as needed to protect hands from sharp edges.
6.2 Environmental precautions:
Prevent releases into the environment.
6.3 Methods and material for containment and cleaning up:
Pick up or scoop spilled material and place in an appropriate container for re-use or disposal.
Section 7: Handling and Storage
7.1 Precautions for safe handling:
Wear protective gloves as needed to protect hands from sharp edges.
Normal and recommended cutting methods are the use of hand-held snips. Avoid sanding, grinding and cutting operations that
generate dusts.
7.2 Conditions for safe storage, including any incompatibilities:
Store in dry condition, protected from weather and out of direct sunlight.
Section 8: Exposure Controls / Personal Protection
8.1 Control parameters:
Occupational Exposure Limits: Consult local authorities for acceptable exposure limits.
Ingredient
ACGIH® TLV®
U.S. OSHA PEL
Particles Not Otherwise Specified (PNOS)
10 mg/m
3
(inhalable);
3 mg/m
3
(respirable fraction)
15 mg/m
3
(total dust);
5 mg/m
3
(respirable fraction)
Cellulose (paper fiber)
10 mg/m
3
15 mg/m
3
(total dust);
5 mg/m
3
(respirable fraction)