Installation Instructions

CertainTeed Vinyl Siding Installation Guide

5" Square Header with End Caps over

3-1/2" Lineals Sides and Bottoms

Assemble the 5" header and cap. The side 3-1/2" lineals should

extend approximately 1" inside the header assembly.

Finish the corner by sliding the 3-1/2" side lineals behind the

header, making sure the 2" rain tab on the end cap extends into

the receiving area of the side lineals.

NOTE: If using crown molding, see page 58.

end cap

(from 5"

lineal)

removing this section

allows side 3-1/2" lineal to

slide behind the 5" header

3/4" rain tab

5" lineal

header

3/4"

3-1/2"

1-1/8"

1-1/2" to 1-3/4" slit

in pocket area of the

3-1/2" side lineals