Installation Instructions

CertainTeed Vinyl Siding Installation Guide

Creating End Caps for 5" Lineals

To create the header, ﬁrst cut a 7" piece of 5" lineal. Measure and

trim as shown.

The resulting piece ﬁts into the end of the 5" lineal.

The ends of the 5" lineal also need trimming to receive the end

caps. Create a 3/4" rain tab in the pocket area and trim off a

3/4" tab from the bottom.

NOTE: To make end caps for 3-1/2" lineals, simply start with

a 5-1/2" piece and remove the 3/4" and 2" areas as shown

for the 5" end caps.

remove

3/4"

raintab