User's Manual

certgate GmbH
6 / 17
Pairing
failed
Connection failed.
The following errors may
occur:
Pairing fail 1:
Pairing canceled
Pairing fail 4:
Pairing code wrong
Pairing fail 23: Time
out
3.4. Settings
Under the menu , you can configure settings for your AirID . Use the right button to select and confirm the settings.Settings
Setting Display Meaning
Settings Main window
Sig
Strenght
Select the signal strenght of the AirID.
Possible configurations are:
1-4 bars
Advertising Use the right button to set the advertising mode (Connection via
Bluetooth) to permanent or EcoMode
Display Indicates the lenght of time the display will remain on. Select
whether the display is on permanently or turns off after a while.
LEDs Select whether the LEDs are enabled or disabled.
Buzzer Activate or deactivate the acoustic feedback of the AirID.
Force
256bit
Select if you want to force the AES 256-bit encryption of the
connection between AirID and the work device
If during the active advertising mode
(EcoMode) no connection to a device is
established, the advertising mode
switches off automatically to save battery
power. Therefore, a manual reconnection
is necessary afterwards.
To save energy, a work schedule can be
created via AirID Central APP. If the
working hours are exceeded, the
advertising mode remains deactivated.