User's Manual

Remote Control System
2008 Cervis, Inc.
11
8. Release Button 1. The RX LED goes out, the TX LED briefly flashes
green, and then it goes out.
9. Test that each push-to-operate (PTO) button operates the output to which
it is assigned. When a PTO button is pressed, its assigned base unit
output is active and the base unit Out LED should glow green for as long
as the output is active. When the PTO button is released, the output
becomes inactive, and the base unit Out LED goes out.
Once PTO button to base unit output verification is complete, the SmaRT 206 System is
ready for use.