User's Manual

SmaRT 206
U024.2-SmaRT_206_SYS-R
2
1.2 PTO-206 Handheld Remote
The SmaRT PTO-206 Handheld Remote features a handheld-to-base unit 300 ft.
(100m) communication range providing six function press-to-operate (PTO) control.
Using direct sequence spread spectrum (DSSS) wireless technology at 2.4GHz, the
handheld unit provides a robust link with a base unit in congested radio environments.
SmaRT handheld units feature seamless association to a SmaRT BU-206F Base Unit
without the need to open either case.
The handheld enclosure is constructed of rugged high-impact polymer and a
polycarbonate face plate securely sealed and attached by eight screws that is then
overlaid with a durable, attractively printed polycarbonate label. The unit is further
protected by a removable rubber bumper that extends beyond the recessed faceplate
and covers the back and sides. A convenient removable lanyard is provided that can be
securely attached to the bottom of the remote.
The handheld is powered by three size AAA batteries. Three status/diagnostic LEDs
are visible on the handheld faceplate as shown in Figure 2.
Figure 2. PTO-206
Rubber
Bumper
TX Green
when transmitting
RX Red
when receiving
LINK Amber
while linking