User's Manual

SmaRT BU-9H16AF-8F-8V-RS
U064.1-SmaRT_BU-9H16AF-8F-8V-RS
ii
Definitions/Notes
Associate/Association
Mode where by SmaRT handhelds and base units are paired for operation (ID’s exchanged). This
mode is used to commission spare handhelds or base units.
DSSS
Direct Sequence Spread Spectrum; an advance wireless communication technology.
Disassociation
The process of up-pairing a handheld from a base units ID memory.
PTO
Push-to-Operate: Command broadcast only while a button is depressed. The command ends when
the button is released.
Latch
Command broadcast while a switch is placed in position or when a button is pressed. The
command ends when switch is repositioned or when the button is released, or in some cases when
the button is pressed again.
SmaRT Base Unit
I/O unit to which the controlled machine is connected. SmaRT base units communicate with each
other and SmaRT handheld, console, and pistol-grip remote controllers.
SmaRT 9nn Remote Control System
SmaRT system consisting of one or more SmaRT base units and from one to eight SmaRT remote
control units. The systems operate in either the 900MHz range and has inputs/outputs or data
communications.
Line of Sight (aka Direct-Line-of-Sight)
Term used to describe RF communication where the pathway between the units is clear of physical
obstacles such as walls, earth, and other obstructions.
TX/RX
Transmit/Receive
Related Documents
System related Cervis, Inc. Engineered System Approval document
Appropriate SmaRT remote control user manual
Documentation provided by Cervis on delivery
Contact Cervis, Inc. with questions during installation or troubleshooting at (724) 741-9000