User's Manual

900MHz Base Unit Manual
2011 Cervis, Inc.
3
2.0 SmaRT BU-9H16AF-8F-8V-RS in SmaRT Remote
Control Systems
The basic standard SmaRT Remote Control System consists of at least one SmaRT base unit, a
SmaRT remote control unit, and the wiring harness that is used to connect the base unit to the
controlled apparatus. A single base unit is capable of communicating with multiple SmaRT
remotes. Available is a variety of compatible remotes including: PTO-906, PTO-904, and PTO-
902; PG-914 and other pistol-grip remotes; OO-918 and DO-918 18-button handheld remotes;
and a wide assortment of SmaRT Console Remotes. For a full list of compatible SmaRT remote
controllers, please contact your Cervis Sales representative.
Communications between the BU-9H16AF-8F-8V-RS base unit and the remotes are established
at the factory using an association process, which can also be easily performed on site when
necessary using the SmaRT remote without opening the enclosure of either device. Association
processes for each remote control unit are described in detail in each SmaRT remote manual,
Cervis Engineering SpecSheets, and the documentation provided to you with your system.
Figure 2. SmaRT BU-9H16AF-8F-8V-RS with SmaRT Remote Control Units
BU-9H16AF-8F-8V-
RS INT
PTO-906
OO-918
PG-914
Console Remote
PTO-904
PTO-902