Installation manual
Table Of Contents
- FCC Statements
- Table of Contents
- List of Figures
- List of Tables
- Cervis Inc. Safety Precautions
- 2.0 TM70 System Description
- 3.0 CB70 Battery Charger and BT24IK Batteries
- 4.0 Receiver
- 5.0 Starting Up
- 6.0 Operating Instructions
- 7.0 Maintenance
- 8.0 Warranty
- 9.0 Parts Information
- 10.0 Programming a Spare Transmitter
- 11.0 Program the Machine ID in LCD Transmitters
- 12.0 Change Base Channel
- 13.0 CANopen Interface v2.4
- 14.0 LCD70 Display Option
- 15.0 First Come – First Served Operation
- 16.0 LA70 and LA70M Range Limiter
- 17.0 Tandem Operation
- 18.0 TM70 Analog Feedback Calibration
- 19.0 IN0450P Option
- 20.0 IN4D Option
- 21.0 INCAN Option
- 22.0 A1P4RCAN Option
- 23.0 A2ICAN Option
- 24.0 A2VCAN Option
- 25.0 Tele-Alignment Option
- 26.0 R70/Plus Receivers – Software V3.2 Compatible
- 27.0 i-Kontrol Console Box
Operation and Installation Manual
2013 Cervis, Inc.
35
Figure 18. T70 Transmitter and LCD70 Display Assembly
14.3 LCD70 Display Operating Modes
The LCD70 allows the operator to enter in the following modes:
1. EDIT CRANE LABEL: Edit machine identification.
2. INPUT CALIBRATION: Calibrate 0 – 10V analog voltage feedback.
3. OUTPUT CALIBRATION: Select Tele Alignment option to configure analog outputs.
4. Special Operating Modes, such as Programming Spare Transmitter (with copy EEPROM
function) and Change Base Channel (see Appendix A and C).