MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 7/30/08 11:34 AM Page 2 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions sh2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. ould be read before this product is operated. Retain these instructions - The safety and operating instructions should be retained for future reference. Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 NOTES 7/30/08 11:34 AM Page 3 INTRODUCTION Thank you for your decision to purchase Cerwin-vega’s innovative new CV Series professional power amplifier! Engineered for superior sound reproduction, the CV Series line of professional amplifiers deliver top quality audio at an affordable price. The CV Series offer a standard of reliability and efficiency that makes them the perfect solution for every DJ, musician, and sound engineer.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 7/30/08 11:34 AM Page 4 FRONT PANEL CONTROLS NOTES 6. Active Indicators These blue LED's indicate that AC power is connected and the amplifier is turned on. 1. Rack Ears These ears are used to mount the amplifier in any standard 19” rack. 7. Protect Indicators These red LED's indicate that the channel is in Protect mode. When the channel goes into protect mode all output for that channel will be muted.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 7/30/08 11:34 AM Page 5 WARRANTY & RETURN POLICY REAR PANEL CONTROLS Who’s covered by this warranty? Cerwin-Vega’s Limited Warranty on professional audio products extends only to the original purchaser as evidenced by the original Bill of Sale and only for the products purchased from authorized Cerwin-Vega dealers.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 7/30/08 11:34 AM Page 6 PROTECTION SPEAKER COMPATIBILITY Every model in the CV-Series incorporates protection features. The front panel Protection LED indicates the activity of the speaker connection relay circuitry in each channel. When the protection LED turns on, this circuitry is active, and all connected speakers are muted.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 SPECIFICATIONS 7/30/08 11:34 AM Page 7 SETUP CONNECTIONS Stereo Mode Mode Select (5-Way Ouptut Binding Posts) Stereo Mode In stereo mode, both channels operate independently with individual input gain controls. Signal at channel 1’s input produces output at channel 1, while signal at channel 2’s input produces output at channel 2’s output. Recommended minimum nominal load impedance for stereo operation is 2 ohms per channel.
MANUAL_CVAMPS-REV-B1.qxd:Originator: M. Schlazer Size: 8.5 x 11 7/30/08 11:34 AM Page 8 CONNECTIONS WIRING Stereo Mode These are several ways to interface to the amplifier to support a variety of applications.
