Operating instructions

88
E
SELFTIMER
1 Press the Selftimer button. The Selftimer indicator on the
control panel appears.
2 Ten seconds after pressing the Shutter release button, the
Selftimer signal starts blinking. The shutter is released
after another two seconds.
● The focus and the exposure are locked when the Shutter
release button is pressed halfway.
● The Selftimer is canceled after the picture is taken.
● Place the lens cap holder on the viewfinder to prevent light
from entering.
◆ Use a tripod to hold the camera securely.
◆ To cancel the Selftimer after it is activated, press
the Selftimer button again. (The Selftimer mode
is not canceled.)
Note:
Selftimer
signal
Voyant de
retardateur
Señal del
autodispara
dor