User manual

Idle <40

GSM 1800/1900 1TX/RX 215 1.3

Idle <40

2.8 Battery Specifications

The GPS-206 uses power either from the vehicle battery, or from an optional internal battery.

The battery specifications are as follows:

Nominal voltage: 3.6 VDC

Nominal Capacity: 230 mAH when discharged at 46mA to 2.5V

Maximum and Normal Charge voltage 4.2 V

Minimum discharge voltage: 2.5V

Charge current: 100mA

3.0 Installation

The instructions in this section describe the hardware installation of the GPS-206. To install the GPS-206

in a vehicle follow these steps:

• Choose a convenient location in the vehicle – either in the trunk or interior of a vehicle. Avoid

locations that might expose the GPS-206 to excessive heat or moisture.

• Hold the GPS-206 in place and mark the location for mounting screw holes

• Using the markings as a guide, drill mounting holes in those positions

• Align the GPS-206 in the drilled holes and secure it with mounting screws

3.1 Mounting Dimensions

Figure 3: Mounting dimensions of a GPS-206

The GPS-206 is NOT a waterproof or sealed device. Care must be taken to ensure that

the device is kept away from water and other liquids. The GPS-206 can be mounted

inside a weather proofed box if necessary.