User manual

Pin Number Functionality HRNS062 Color Codes HRNS063 Color Codes

1 N/A No Connection No Connection

2 N/A No Connection No Connection

3 Ignition Sense White White (Cable 1)

4 N/A No Connection No Connection

5 N/A No Connection No Connection

6 Ground Black Black (Cable 1 & 2)

7 N/A No Connection No Connection

8 Output 1 No Connection Brown (Cable 2)

9 N/A No Connection No Connection

10 N/A No Connection No Connection

11 Power Input (9-16 VDC) Red Red (Cable 1)

12 N/A No Connection No Connection

13 Input 1 No Connection Blue (Cable 2)

14 Output 2 No Connection Red (Cable 2)

15 Input 3 No Connection White (Cable 2)

16 Input 2 No Connection Green (Cable 2)

Table 1: 16-pin I/O Connector Functionality. HRNS062 is the Power only cable. HRNS063 is for Power (Cable 1) and I/O (Cable 2).

The following figure shows the pin connections for the 16-pin connector as viewed from the wire entry side.

Figure 4: 16 Pin Connector

The manufacturer part numbers for the parts needed to build the cables is noted in the following table.

Item Manufacturer Part Number

Connector Molex 43025-1600

Pins Molex 43030-0008 20-24 AWG

43030-0011 26-30 AWG

Crimp Tool Molex 63819-0000A

Table 2: Manufacturer Part Numbers to Build Cables

3.2 Opening and Closing the GPS-208

3.2.1 Opening the GPS-208

To open the GPS-208 it is highly recommended that the special lever be used (P/N GPS-208-LEVER) in order to prevent

damaging the device.

Follow these steps to open the GPS-208:

1) Insert the curved end of the lever into the space between the lid and the body as shown.