Operating instructions

Operation
OMEGA ACTIVE Emergency power supply 13
 Pull the reader module out of the outside knob until you feel
the stop (1.).
 Connect the Emergency Power Supply with the interface (2.)
at the reader module.
The LEDs in the reader module light up green to signal the
connection with the Emergency Power Supply.
 Wait a couple of seconds before you continue.
 Use your authorized locking medium to open the door.
 Rotate the outside knob of the locking cylinder by at least
one notch.
 After you have opened the door, disconnect the connection
between the reader module and the Emergency Power
Supply.
 Insert a new battery into the locking cylinder. Observe the
notes in the operating instructions of your locking cylinder.