Operating instructions

Operation
OMEGA ACTIVE Emergency power supply 15
Updating the firmware
To transmit new firmware updates, you require a PC (option)
with a free COM port.
Firmware updates are transmitted to the locking cylinder with
the "OMEGA ACTIVE Firmware-Update" software.
ATTENTION
If you separate the power supply during the update
process, the update will not be transmitted and the
process must be started anew.
 Make sure that the connection between the locking cylinder
and the Emergency Power Supply is not interrupted.
 Satisfy yourself that the batteries in the Emergency Power
Supply still have sufficient capacity.
ATTENTION
By a firmware update, all authorizations for the
locking cylinder will be deleted.
 After the successful firmware update, you must reprogram
all authorizations for the locking cylinder concerned.