Operating instructions

Description
OMEGA ACTIVE Emergency power supply 8
Description
The Emergency Power Supply serves for the emergency
opening of locking cylinders of the OMEGA ACTIVE system in
case of flat batteries. The Emergency Power Supply also
allows you to update the firmware of your locking cylinders.
The Emergency Power Supply has its own power supply
comprised of four commercial rechargeable or non-
rechargeable AA batteries to supply locking cylinders with
power. This power supply is sufficient for about thirty
emergency opening operations.
For the emergency opening, the outside knob of the locking
cylinder is opened slightly and the Emergency Power Supply is
connected with the interface. The green LEDs of the locking
cylinder will light up green to signal the connection with the
Emergency Power Supply.
To open the locking cylinder, you need your authorized locking
medium. Hold your locking medium in front of the locking
cylinder and rotate the outside knob by at least one notch.
Without an authorized locking medium, the locking cylinder
cannot be opened.
With the "OMEGA ACTIVE Firmware-Update" software tool you
can transmit firmware updates from the PC into the locking
cylinder via the RS 232 interface.