Owner`s manual

Additional resources:
Your county family living agent, your
local emergency government office, the
American Red Cross, the Federal
Emergency Management Agency
Related publications:
“Repairing Your Flooded Home,”
American Red Cross/Federal
Emergency Management Agency, 1992.
Pamphlets on heating systems from
your local utility company.
ELECTRIC SYSTEM
Electric heating systems are part of electrical wiring system clean-up.
Many local codes require that a licensed electrician do the work, or that a
municipal inspector check the system before you turn the power back on.
If power isn't shut off to a flooded furnace system, shut the main switch
off at the meter or remove the fuse to the furnace. (When touching
switches, stand on a dry board and use rubber gloves or a dry stick to pull
handles.)
Clean mud and debris from electric baseboard heating fixtures, being
careful not to damage heating equipment. Have a professional handle
cleaning and reconditioning of all working parts.
CHIMNEYS
A cracked, clogged or leaky chimney can cause fires or carbon monoxide
poisoning. Be sure you check your chimney for dirt, debris and leaks
before lighting the furnace or a fire. If flood damage has occurred, have a
mason do an inspection and make repairs.
Most chimneys have a foundation in the ground. If the chimney looks
like it has settled or tilted, examine the footing to see whether it has
been undermined.
Have the chimney rebuilt if it has settled badly or is broken where it
passes through floors or roof.
If mortar in the joints between bricks has disintegrated, have a mason
rejoint the chimney with cement.
Information from: University of Wisconsin Cooperative Extension, the American Red Cross, the Federal Emergency Management Agency
University of Wisconsin-Extension Cooperative ExtensionUniversity of Wisconsin-Extension Cooperative Extension