User manual

Figure 36: PT-101 User Defined Button Options

To enable the User Defined Button check Enable. Now select the desired action. If selecting a Status Key

the status number and key data needs to be configured. If selecting a GeoStatus the radius of the

GeoStatus must be entered. If selecting input or position there is no additional configuration. An Input 1

High packet will be sent when the button is pressed.

2.9 Send Configuration Button

The Send Configuration button begins the automatic programming of the selected device. The unit will be

programmed with the data in the System Information section and with the Features that were selected.

It should be noted that the selected device is programmed all at once. If you wish to add a feature a later

date then it must be totally reprogrammed (include existing features as well as any new feature(s)). The

progress bar above the communications window displays the state of the programming as it s processed.

The Send Configuration is not enabled until at least one Feature is selected. The button is also disabled as

the programming is taking place.

2.10 DP-1000S Main Menu

The main menu of the DP-1000S has four upper level selections: File, Configure, Program and Help.

Figure 37: Main Menu

2.11 File Menu

There are 5 selections on the File menu: Open, Save, Save As, Print and Exit.