User manual

Figure 38: File Menu

Open: This selection allows an existing device configuration file to be opened. The default location for

the configuration files is in the Fleet-Control application data folder. ON a Windows XP system the path

to this folder is C:\Docments and Settings\All Users\Application Data\CES Wireless Technologies\Fleet-

Control.

Save: This selection will save the current configuration of the DP-1000S in the configuration file format.

It uses the existing file name (if Open or Save As were previously selected) or to a new file name (if Open

or Save As were not previously selected).

Save As: Provides the capability to save the configuration to a new file name.

Print: Prints the configuration.

Exit: Exits the DP-1000S application.

2.12 Configure Menu

There are four selections on the Configure menu: Com Port, Verify Mobile Connected, Reset GPS206

Used with a Garmin PND and Reset GPS206 used with Auxiliary Expansion Cable.

Figure 39: Configure Menu

Com Port: Provides the capability to select the serial communications port to use in communicating with

the selected device. There is a selection for the Com Port to use with the GPS-201/202, GPS-205 and

GPS-206, a section select the Com Port to use with the PT-101 and a section to select the com port to use

with the GPS-208.