User manual

2.2 System Setup

The System Information section contains the fields necessary to program the GPS-201, GPS-202, GPS-

205, GPS-206, GPS-208 or the PT-101 to connect to and send data on the GPRS network. It also includes

the Unit ID field, which must be unique for each unit in the fleet (regardless of the device type), the Wake

Up Packet Interval field, the Automatic Reset Interval field and the GSM Registration Reset options.

NOTE: If the device is to be used on FleetLinc or with the CES DataGate CES must

assign the Unit ID. Requests can be made by sending an e-mail to sales@ceswireless.com.

Figure 3: System Information

APN: The APN for the GPRS network is entered in the field labeled “Enter the APN for the Network”.

Sample values for the APN are as follows. The APN to use should be provided by the GPRS provider.

Network APN User Name, Password Gateway Number

AT&T Wireless PROXY

Cingular Wireless ISP.CINGULAR +121

CES DataGate (USA) c1.korem2m.com

CES DataGate (Canada) apn.zerogravitywireless.com

Wyless teleargo.t-mobile.com User: CES9a97

Password: 3B9B4261

Table 1: Sample Network APN, User Name, Password and Gateway Number Information

To make the setting of the APN, User Name and Password easier you can click on the button and

select the carrier from the list of carriers (as shown above in Table 1). This list contains the carriers whose

configuration values are known to CES.

User Name: The user name for the GPRS network is entered in this field. Not all carriers require a user

name and password (i.e. AT&T Wireless). If one is required the user name should be entered here.

Sample user name and passwords are noted in Table 4 above.

Password: The password for the GPRS network is entered in this field. Not all carriers require a user

name and password (i.e. AT&T Wireless). If one is required the user name should be entered here.

Sample user name and passwords are noted in Table 4 above.